Your cart is empty.
Your cart is empty.Product Description
Hirate 360 Degree Rotation & Single Lockable Caster for Home and Industrial
Imperial Stem 3/8"
- *Stem Type: IMPERIAL SIZE
- *Stud Diameter: 3/8”
- *Stud Length: 0.79”(20mm)
- *Caster Type: Threaded Caster
- *Caster Diameter: 3“(75mm)
- *Caster Width: 0.87”
- *Installing Height: 3.8”
Single Brake Feature
- 2PCS SINGLE LOCKABLE CASTER :
- 1)With brake, effective to stop and fix the device and prevent it moving to hurt others.
- 2)The brake locks the Caster ONLY and the swivel is still moveable.
Heavy Duty Caster
- *Caster Material: Polyurethane
- *Bracket: High quality steel - galvanizing
- *Double Bearing: Steel ball bearing
- *Total Load Capacity: 600lbs
- 360 Degree Swivel and Roll Smoothly: Very convenient to transform to any directions, and spend little strength to move on.
Set of 4 Stem Caster in 3/8"-16UNC
Package Contains:
- 2 x 3" Caster with SINGLE BRAKE
- 2 x 3" Standard Casters without brake
- 4 x 3/8"-16UNC Threaded Screw Inserts
NM Drifter
Reviewed in the United States on February 13, 2025
Used these wheels when I decided to make my IKEA cabinets rolling. The wheels are easy to install and are quiet. My cabinets are now mobile. Excellent choice.
Bob Dykeman
Reviewed in the United States on November 18, 2024
Perfect wheels that rolls smoothly and easy to install. The price is a good value too.
JEREMY KOMORN
Reviewed in the United States on November 10, 2024
These fit into my Brute mop bucket with no issues!
itsme
Reviewed in the United States on July 14, 2023
Arrived in time and fit perfectly. Smooth rolling on my hardwood floors and sturdy, I love them.
Tayo89
Reviewed in the United States on June 25, 2023
Great product made well. Directions are non existent.. found really good directions from other reviews. Installation was a breeze after that
Deborah Hassell
Reviewed in the United States on February 23, 2023
They were easy to install. Was able to lift the tables by a few inches and now move with ease.
James Chestnut
Reviewed in the United States on August 8, 2022
Very good product and easy to install, with the proper tools.Tools required:1/2" Drill BitDrill, corded or cordless (make sure your drill can handle it)9/16" hex head bolt (take one of the inserts to the store with you and try it there, good time to buy a proper drill too)9/16" wrench (not the one that came with it, but don't toss it yet)1. Mark the location, or guess, but be careful because the drill could walk on you, maybe drill a starter hole with a smaller bit first.2. Drill to sufficient depth, just over the length of the insert.3. Blow the dust off and take your eye protection and earplugs off; you had those on right?4. Insert the bolt all the way into the insert (from the wide end). If it sticks out the other side you may need to ensure your hole is deep enough.5. Place the narrow end of the insert into the hole and start by hand, then switch to the wrench and tighten until the flanged (wide) end seats onto the wood. Moderately slowly! Like don't take 30 minutes but don't play NASCAR pit stop either.6. Remove the hex head bolt, leaving the insert fully seated.7. Screw the casters into the casters into the insert until fully seated. Take the wrench that came with the set (like I said, don't toss it like I did) and tighten until snug and then another quarter turn.8. Take off your gloves and clean up the mess; you did wear gloves didn't you?Notes: - If the insert backs out with the bolt, either the hole you did is too big or the wood is too soft, either way you may need some help at this point, ask Mom, she'll know what to do.- Do wear gloves, eye protection, short sleeves or at least rolled up, and no loose clothing, spinning tools like to grab things and break them. If you don't like loud noises wear ear protection. But wear them even if you do, tinnitus and hearing loss are no joke.- Don't work alone, have someone within ear shot, that way they can bring you a cold drink with they come to admire your handiwork.
Lele
Reviewed in the United States on April 17, 2022
I bought these wheels to replace 1 inch wheels that came with my rolling desk.These wheels are the Cadillac of rolling wheels for furniture!!! My desk rolling so smoothly now that I can sneak up on people. They glide effortlessly across a tile floor that has wide grout lines.I did have to pop the old wheel sockets out so I'm thankful these wheels came with some. In the end it was absolutely worth a little elbow grease. After all, you are buying something that didn't come with your original item, whatever that item may be.
Recommended Products