Your cart is empty.
Your cart is empty.Product Description
Print display 1
Print display 2
Print display 3
Print display 4
Sal
Reviewed in the United States on February 7, 2025
Fits like OEM on the P1S and A1. No bed adhesion issues so far. Just make sure to clean it before you use it for the first time.
Stefan C.
Reviewed in the United States on January 2, 2025
This low temperature build plate works really great. I started 3D-printing about 6 month ago and mostly use the textured PEI plate, but I was curious about this tacky low temperature plate, especially with some of the more expansive versions out there from brand name printers and suppliers.I used this on P1S system and just used the new "Cool Plate Super Tack" setting and then printed a test model (see picture) and it worked flawless for every test print.Usually if I print something like that on textured PEI, I have to raise the temperature for PLA from the standard 55C to 60C and even ad a brim. And even then it might topple over half way through the print.But with this PLU Build Plate, it worked perfect every time and at much lower 45C.So, I think this is a great alternative to some of the more expensive low temp build plates out there.
J. A. Maynor
Reviewed in the United States on January 12, 2025
I starting resorting to glue on my PEI plate due to adhesion issues but it creates for some sticky residue that needs to be cleaned off. Minor annoyance, but necessary at times. This plate resolves that issue.Prints stick to this plate remarkably well, yet somehow, prints are still removable just fine. Not sure how they did it but it's a great product, highly recommended!
Steven Chain
Reviewed in the United States on January 12, 2025
From the photo you can see that the adhesion of this plate is good. This is an adhesion test on the Bambu Handy app, and it printed without problems on my P1S. While the ad copy talks about cold adhesion the plate recommends standard Bambu printer presets for a PEI plate. On my P1S that is 55° C. Which is correct? This was printed at 55°.This is a PLU coated plate. I searched for PLU and all returns point to this listing here on Amazon. There are no other. I even did a search with AI. Same results. So, what is PLU? Why doesn't anyone else use it? Or is it a new name for something else?Cleaning instructions are a damp towel. No soap and no alcohol. Those will damage the coat. A damp towel won't take off oil from your hands or oil from any other place. Also, the prints I did left a shadow on the plate, close inspection with a magnifying shows a white residue on the plate. I printed with white PLA. Also, the plate feels rougher where the shadow is. I have never seen a shadow on a PEI plate. PLA comes off clean. Soap and water won't remove the shadow.Now, let's talk about quality. Something about this plate that feels lesser in quality. The edge of the plate has a rough feel, and the coating is inconsistent across the plate.Finally, if this is a competitor to the Bambu Super Tack build plate it is priced above the Bambu plate. It isn't a Super Tack and it cost more. 2 stars
F. S.
Reviewed in the United States on January 11, 2025
Amazing print plates for my P1S and my X1CC!! This arrived the next day which is very fast!! I was excited to use this because sometimes my prints pop off before the print is complete. The adhesion was great I have printed over 50 prints already and not a single issue. Well worth the money!! Functionality is impeccable. I highly recommend these plates!
Brandon B.
Reviewed in the United States on December 31, 2024
Love this plate so far. I don't run it with lower temps, I just treat it like my other textured PEI plates, only my prints stick so much stronger to this plate.I've only ran pla and petg on it.If I'm not needing a specific surface finish on the bottom of the print, this is 100% my new go-to.It is a bit rougher and not as consistent of a texture when compared to PEI.Honestly, everyone should have one of these in their kit.Would definitely recommend.
JJ
Reviewed in the United States on December 31, 2024
Printed just fine at 40c suggested temperatures for PLA. Plenty of adhesion when following the instructions. It was delivered quickly, whereas something like the Cryogrip, as another commenter mentioned, took nearly 2 months to arrive to my door.
Emmanuel
Reviewed in the United States on December 29, 2024
The Wefuit upgrade build plate works fine for my Bambu Lab printer, but it doesn’t compare to something like the CryoGrip in terms of grip and overall performance. While it does the job, the adhesion isn’t as strong, and the texture could be better. It’s a decent alternative, but I wouldn’t say it’s a top-tier option.
Recommended Products