Your cart is empty.
Your cart is empty.Product Description
UTV Pass Through Harness
Harness always falling off shoulder and uncomfortable?
With our harness pass through UTV you will get more comfortable riding with safety.
As you know, when the seat is taller than the person sitting on it, we will feel uncomfortable and the harness falling off occasionally. It is annoying and we can’t focus on our riding.
That is the reason we launch our seat belt bezel.
Why not get one for your SxS?
Tips about the product:
- The package included clear instructions and a cutout template.
- If the cutout sheet is missing, or the cutout sheet is not clear or damaged, you need to let us know, and we will help you solve these problems.
Tips about the installation:
- Use a Dremel Tool with a Multipurpose Cutting Bit and Router attachment. It helps you do cutouts quickly.
- DO NOT REMOVE ANY FOAM. Just push the foam around the insert as you go.
Vehicle Fitment:
Compatible with 2016-2023 Polaris General 1000/ 2017-2022 Polaris General 4 1000
Compatible with 2020-2023 Polaris General XP 1000/ 2020-2023 Polaris General XP 4 1000
Compatible with 2015-2020 Polaris RZR 900/ 2015-2019 Polaris RZR 900 XC
Compatible with 2015-2019 Polaris RZR 4 900/ 2015-2021 Polaris RZR S 900
Compatible with 2015-2021 Polaris RZR S 1000/ 2019-2020 Polaris RZR S4 1000
Compatible with 2015-2021 Polaris XP Turbo/ 2016-2021 Polaris XP 4 Turbo
Compatible with 2014-2023 Polaris RZR XP 1000/ Polaris RZR XP 4 1000
Compatible with 2014-2019 Polaris Sportsman ACE/ 2015-2019 Polaris Sportsman ACE 570
Compatible with 2018-2021 Polaris RZR RS1
（Works with Polaris factory seats and allows for use of 4 or 5 Point Harnesses）
Installation Instruction
Step 1
With a template to guide you, follow the template and measurements. Dont rush, measure twice and cut once! Once you trace your outline use the cutting bit to cut the plastic away.
Step 2
Clear this section of foam. Be careful with this step! Do not allow the foam to pull from beyong the borders of your cut out.
Step 3
Take notice of the clips and how they connect on each pass through. Once these are lined up, clicking the two pieces together. Notice: You don't have to remove the foam so that it will be more steady hold.
Warren Horton
Reviewed in the United States on February 8, 2024
These are great if you dont want to order seats with passthru for harnesses. Easy to install and has the templates so you know where to cut. Took me about 30 min to do
TY L.
Reviewed in the United States on February 2, 2024
The directions were good. There are a few you tube videos that also helped with the install. Definitely use a Dremel to cut the back of the seat. Using a sharp knife will not work. They said not to trim any foam on my model, however I found it necessary to do so for getting the bezels to marry.
Noe Reyes
Reviewed in the United States on January 2, 2024
Super awesome makes seats super comfortable
Paul M. Eason
Reviewed in the United States on July 7, 2023
A little hard to install the first one but after that, they were easy. Watch some on line videos before you start, there’s plenty of them online. I used a Dremel with a small cutoff wheel, a box cutter with some fresh blades, a long “click” knife, and a 1” hole saw. The trick with the hole saw was to shorten the pilot drill bit and drill easy.Fist one took 2 hours, second one 45 min and the last two took 15 min.
James t.
Reviewed in the United States on October 7, 2023
The product is decent. The back of the seat cut out is correct. The front cut is not. If you follow the front cut (figure H) your seat material and foam will be exposed.pic 2 At the top. It says cut 1" below the seam, " through the bead. DONT DO IT. Pic 2 is the result. The cut needs to be 2.5 inches from the seam or 2.5 inches down from your "z" in the rzr logo. If you don't believe me, before cutting push a screwdriver through your foam, at the ends of the pass through and mark it. Do not cut through the beads stitching. Just a small material slice will work. It's a little tough to stretch the material, but you wont be disappointed. Pic 1.and 3. Ive contacted kemimoto with the issue after destroying my seat. Happy trails. JT
Ian
Reviewed in the United States on February 2, 2022
These inserts are the perfect addition to the stock RZR seats if you are planning on adding 4 point harnesses.Initially the installation seemed a bit intimidating because you essentially have to cut up your factory seats by cutting out some plastic and slicing the fabric. The first one you do will most likely have the most trial and error and time spent figuring out how to make things work and fit right.My suggestion to anyone who is planning on buying these or has already bought them is to invest in a Dremel with cutting discs. I did not have a Dremel and ended up doing the majority of my cutting with a angle grinder. Due to the size of the angle grinder blade I was not able to make specific precise cuts so I relied on a hand drill with grinding attachments to finish out some of the corners. Once you get the hang of it it is very easy and seats 2-4 were a breeze.Overall these inserts are much more cost effective than spending a lot of money on aftermarket seats that come with harness pass throughs from the factory.
Lenny_K
Reviewed in the United States on February 13, 2021
I purchased this set for my 2018 RZR XP4 Turbo because it was slightly cheaper than other brands. It was a scary feeling cutting into perfectly good seats but the install went smooth. Watch the YouTube videos out there for some good tips and tricks on the install. All of the different brands of these seem identical. I used a dremel type tool instead of a knife to cut the back plastic.
Wes Frazier
Reviewed in the United States on January 15, 2020
Template to is way to small . I understand it needs to be slightly smaller for a tight fit but I didnt even cut the seat due to the templateUpdateI contacted the seller an informed them of the issue . They immediately responded an were aware of the issue of the templates being sent with incorrect size . They emailed me corrected version an I printed it off . Haven't installed them yet but I know they will be good .
Recommended Products
$89.99
$ 36 .99 $36.99