Shopping Cart

Your cart is empty.

Your cart is empty.

Keyless2Go Replacement for Keyless Entry Remote Car Key Vehicles That Use 3 Button OHT692427AA - 2 Pack

Free shipping on orders over $29.99

$27.70

$ 12 .99 $12.99

In Stock

About this item

  • KEY FOB REPLACEMENT: Replace your lost or broken remote car key quickly and easily with the Keyless2Go remote key fob
  • PROGRAMMING: If you have 2 working original keys you will be able to program these remote key from home with easy to follow instructions; key blade will require cutting by a qualified locksmith or dealer
  • FITMENT: This keyless entry remote is compatible with a wide range of vehicles from Chrysle, Dodge, Jeep that use 3 Button OHT692427AA; check the vehicle fitment tool above and description for exact match.
  • PART NUMBERS: This remote car key works as a replacement for remote keys with FCC ID: M3N5WY72XX
  • PRE-TESTED: Each remote car key replacement comes complete with batteries and has been pre-tested to ensure quality and functionality



Product Description

Remote Head Key

The Best Self Programmable Replacement Key fob on the Market!

An inexpensive replacement for your original remote key fob, this Keyless2Go car key replacement is compatible with a wide range of vehicles from Chrysler, Dodge, and Jeep vehicles. Each fob key has been pre-tested to ensure functionality and that signals are transmitted properly. The keyless remote key is self-programmable if you already have 2 working original keys that start the engine. The key blade will need to be cut by a qualified locksmith or dealer. Every remote key fob comes complete with batteries and free customer support to help troubleshoot. To ensure this replacement key fob will work with your vehicle, your existing remote key must be FCC ID: OHT692427AA, OHT692713AA.

FITMENT:

2011-2012 Chrysler 200

2005-2007 Chrysler 300

2007-2009 Chrysler Aspen

2006-2010 Chrysler PT Cruiser

2007-2009 Chrysler Sebring

2008-2011 Dodge Avenger

2007-2012 Dodge Caliber

2006-2007 Dodge Charger

2005-2011 Dodge Dakota

2004-2008 Dodge Durango

2005-2007 Dodge Magnum

2007-2011 Dodge Nitro

2006-2009 Dodge Ram

2006-2007 Jeep Commander

2007-2016 Jeep Compass

2005-2007 Jeep Grand Cherokee

2008-2012 Jeep Liberty

2007-2018 Jeep Patriot

2006-2017 Jeep Wrangler

How to Program your Keyless2Go Key Fob Replacement:

1. Insert first original working key into the ignition and turn ignition switch to ON. Wait for approximately 3 seconds then turnignition to OFF and remove key.

2. Within 15 seconds of removing first key insert second original working key into ignition and turn ignition switch to ON. Wait approximately 10 seconds. You will see the immobilizer warning lamp illuminate on the dash and you will hear an audible tone.Turn ignition OFF and remove the key.

3. Within 50 seconds insert the new unprogrammed key into ignition. Turn ignition switch to ON. After approximately 10 seconds you should hear an audible tone and the immobilizer lamp will remain illuminated for 3 seconds. Once this occurs programming iscompleted.

4. For each additional key you must repeat these steps starting with step number 1.

***We cannot certify the vehicle's compatibility outside of the USA and Canada***

DISCLAIMER

All product names, brands, logos, and or other trademarks within our sales information are the property of their respective owners. These are used to simplify the identification of the proper parts for a vehicle. None of the companies or trademarks affiliate with, endorse or sponsor us or our products.


kurt
Reviewed in the United States on February 5, 2025
These keys are as explained on line they work great.
Ben
Reviewed in the United States on February 11, 2025
The 2 pack of 3 button key/fobs I got for my 2016 Jeep JK are great. Yes I would buy them again, but hopefully won't need to. That's the one thing I can't grade them on because I have only had the keys for a week.They seem like good quality and well made. They paired easily and I was able to get my local big box store to cut them for the price of a regular blank.My one complaint, which was easily bypassed, is how far out the buttons are raised. Within 10 mins of having the key paired and sitting in my pocket, the panic button got pushed. I can only imagine a new set of keys from Dodge might have the same problem. I wouldn't know. I can't afford a new car nor the $200+ for a new key.Crack open the fob like you're changing the battery. Pull out the clear plastic sheet with dimples on it that get pushed when you push a button. Snip off the dimple that pushes the panic button. Problem solved. I suppose my doors might be locking and unlocking while I walk around. I'll never know.
Kim
Reviewed in the United States on February 10, 2025
My Jeep only came with 1 key, my local locksmith cut and programed both keys in about 5mins for $60 and they work great. No issues what so ever.
Veronica Gonzalez
Reviewed in the United States on September 24, 2024
I bought these keys and had them cut and programmed. They worked great and after 1yrr the fob stopped working. I thought the fob was defective and I kept using the other fob. It stopped working too. I've changed the batteries to no avail. They still start the car but nothing more. The Fobs are worthless, and they won't open or close the doors! Don't waste your money. Their customer service is nonexistent. No suggestions just warranty is up. Buyer Beware!Customer service response.Dear Customer, Thank you for reaching out to us regarding the issues you are experiencing with your fobs. I understand how important it is to have reliable access to your vehicle. As per our warranty policy, our products typically come with a 90-day warranty from the date of purchase. Since your purchase was made years ago, the warranty period has unfortunately expired. Best regards, Customer Support Team
J. Raúl Mote
Reviewed in Mexico on May 30, 2024
Muy buenas , solo corta y programa.
William N Adams
Reviewed in the United States on October 6, 2024
I only had one Jeep key so this set was a life saver. Home Depot cut the keys for free since I already owned them and a local lock smith programmed them to the car for $30 total. The dealerships wanted a minimum of $175 per key.
Brandon r.
Reviewed in the United States on October 19, 2024
Pretty easy to follow instructions and both keys programmed correctly.
A&C Collingridge
Reviewed in Canada on October 15, 2024
Worked great. Just what we needed
Kedge
Reviewed in Canada on January 14, 2023
Went to a dodge dealership, a single key was found to be $250 plus around $80 to program, so when I saw these two keys for this price, I was very skeptical on my purchase. Well I got them, it cost me $6 per key to get cut, and token me less time to program both of them, then it did for my kid to go in and out of Starbucks.My only issue with them is, the buttons are raised like a 32nd over the hard plastic, which makes them super sensitive, so you have to make sure you don't hit unlock as you're walking away from your car.
Customer
Reviewed in Canada on November 15, 2022
Worked perfectly for my 2008 Jeep Wrangler JKU. Super easy to program and had them cut at local hardware shop. I would buy again and highly recommend if you need new keys!!!
Austin O.
Reviewed in the United States on October 19, 2022
This product saved me at least $200. I was quoted $1000 for two keys from the dealer!!The process was simple and easy, just like they said. I got the keys in the mail. I found someone to cut the keys based on my old key (this was the hardest part of the job, since multiple places told me they didn’t just cut keys). Once they were cut, it took me 5 minutes to program them both myself. I had two previous working keys, so I was able to do the method of inserting two old keys followed by the new key.Questions I had that were answered during this process:1) YES, programming it with the two old key method will program the new key to start the car AND program the new key fob to unlock and lock the car.2) what is a chipped key? The chip is RFID (similar to your credit cards), and that’s what you’re programming to match your car.What a great product! Still can’t get over how easy it was and how much money I saved.
John Green
Reviewed in Canada on October 19, 2021
Bought 2 keys not long ago and 2 more in sept, as you can see in pic they are not the same inside. Had cut and programmed, first 2 keys work fine, a bit less range then stock key had. The second set will start the truck but not lock and unlock with the buttons. Messaged seller but got no reply.
The Man
Reviewed in the United States on July 31, 2017
After my last remaining remote key stopped functioning as a remote, I decided to try these as a replacement. I had them cut without issue at the local hardware store. The keys did program with two working ignition keys from my 2007 Dodge Ram. However, the programming instructions online where not completely accurate with respect to the expected tones and dash lights indicating the keys where program. Once the keys were programmed, they work. However compare to the factory keys that will work from inside house, you need to essentially be standing next to the vehicle for the keys to work. They are no range whatsoever. Even if you are 10 feet away in a parking lot, the keys will not work. You must be standing next to the vehicle.
Recommended Products

$14.95

$ 7 .99 $7.99

4.4
Select Option