Your cart is empty.
Your cart is empty.Safely strips loaded rounds in seconds without damage to bullet or case. Features engineered head design that allows use on full range of calibers from tiny 5.7 X 28FN to the largest Magnums. "Full-size" ergonomic molded handle with rubber insert for comfort and sure grip. Traps components with just a few raps on the bench.
Mike
Reviewed in the United States on March 31, 2025
This was surprisingly easy to use. Put the primer side of the bullet into the flat side of the collet and then secure in the puller. Give it one or two whacks on a hard surface and the bullet and powder easily come out.
Camping 123
Reviewed in the United States on February 13, 2025
Ok so far it's working great. No problems.I've only used it on about 5 9mm rounds.lolI'll update later
Rolando S Molina
Reviewed in the United States on April 15, 2025
Very good
Hugh Jass
Reviewed in the United States on May 28, 2024
This is far more comfortable to use when pulling a large volume of projectiles than my old, unpadded RCBS version. Works great and will stand up to many thousands of pulled rounds.
Tim
Reviewed in the United States on December 18, 2024
It works perfectly fine. I'm only giving it four stars because I only got one of the two collets. Whatever the hell they're called the little rings that you put around the bullet. You're supposed to get a small one and a larger one. I needed the larger one immediately. And it wasn't included. I did reach out however and the company sent it to me ASAP free of charge and I got it in under a week. Don't let that stop you from purchasing this. I'm just giving you my honest review. It does exactly what it's supposed to do and it does it very very well.
Jsheppard48
Reviewed in the United States on October 6, 2024
New to reloading and made a stupid mistake. Ordered the bullet puller received next day. Was able to unseat the bullets. They were a light crimp 45acp. Saved the bullets and powder. also worked well for a 30-30 rifle round. It was a medium crimp. Three good whacks did the trick. Read the directions. It's a winner.
Customer
Reviewed in the United States on April 28, 2024
I used this puller to keep from having collet pull marks on the projectiles. My powder dispenser malfunctioned, I had no idea at what round count it malfunctioned. I needed to pull all 650 rounds apart without damaging any components. The puller did great, all 649 ballistic tip projectiles were pulled without any damage. The puller shows no signs of wear or damage after pulling 650 338 Lapua Magnum rounds. I do have a suggestion to anyone buying this puller, before using place cleaning patches in the bottom of the powder/bullet tube, this will prevent damage to the projectile tip. The first projectile I pulled, the tip hit the hard plastic bottom of the puller and damaged the tip. I used a screwdriver to place cleaning patches in the bottom of the tube, 649 projectiles pulled with no damage. The cleaning patches did not interfere with pouring the powder and projectile into a container. I'm leaving the patches in the puller, there may be another material that works better, the patches were available and worked for me.
Andrew
Reviewed in the United States on July 23, 2023
It’s a great product it’s super useful for pulling multiple types of bullets and not damaging the floor, after first I was skeptical it would break but it hasn’t and I’ve pulled a couple hundred rounds with it so far. The price is amazing as well
Voinraud2
Reviewed in France on June 19, 2023
Lorsque l'on reçoit cet outil, on se dit: Non c'est une grosse daube. Et bien, non! Il est redoutable d'efficacité, testé sur plus de 100 cartouches de 8x57 d'époques, et de deux cent cartouches de 303 British de 1943, et bien aucuns soucis. Pour le peu qu'on se serve d'une bonne cale de bois dur, pour la frappe. C'est vraiment un super marteau à inertie. J'en suis pleinement satisfait.
Saul tellez hernandez
Reviewed in Mexico on March 6, 2021
Muy bueno justo como viene en el anuncio tal cual, no tiene diferencia ya lo cale, con cartuchos 7.62 mm., .45", .32" , .380". Y es muy útil contento con lo que recibí. Grcias provedor.
André F.
Reviewed in Italy on December 19, 2021
Ottimo prodotto. Consiglio di lasciare l'anello per il calibro dentro e di allentare la vite di plastica così entra il colpo. Poi stringere e battere. Anche ottimo per ri-allungare di poco la palla dando solamente un piccolo colpo senza espellere la palla e rifare tutto da capo, in caso aveste confezionato troppo il proiettile. Qualità prezzo non ho idea ne esperienza e mi astengo nel dare un giudizio. Però ho lasciato 5 stelle perché per quel prezzo mi ha risolto problemi senza crearne di nuovi.Consigliatissimo.
Michael C.
Reviewed in the United Kingdom on October 1, 2017
Good solid piece of kit. One of those items that when you need it, nothing else will do. All reloaders need one sooner or later.
Thank you very much greatly appreciated
Reviewed in Canada on December 1, 2016
Absolutely awesome I just made a few dummy bullets with no powder and no primers just wanted to try it out and it works like a charm every dummy bullets popped out with only a few taps now I have no worries if for some reason I did full up making up reloads I am sure with this tool there be no problem in taking down the live bullets it worth every penny the shipping was faster than expected and it works just has advertised awesome tool thank you very much
Recommended Products
