Your cart is empty.
Your cart is empty.Product Description
-
-
Racing Rear Black Seat Stand
The Rear Seat Bracket Of The Racing Car Is Used For The Marada Racing Wheel Stand And Can Be Upgraded To a Simulator Cockpit. It Is Equipped With a Breathable Race Seat With Black Double Lock Rails
-
Racing Rear red Seat Stand
Racing Rear Seat Bracket, Equipped With Leather Gaming Seats For Marada Racing Wheel Stand, And Can Also Be Upgraded To a Racing Simulation Cockpit Upon Purchase
The above seats and seat brackets need to be purchased separately, and this product does not include seats and seat brackets
BOB24502
Reviewed in the United States on March 4, 2025
Great sturdy stand! I hand built a stand with 2x4s and used it for my G27, and it was so wobbly and impossible to learn how to drift with because it would slide all over the floor. I then did what I should have done from the get go and bought this stand… huge difference. This thing weighs about 30/40lbs, has great rubber pads that stick to the floor in my house, now I can finally learn how to drift with this setup. Even with the force feedback torque setting on the wheel set all the way up, the stand doesn’t move, it is so much better than my old setup. Took maybe 30min to put together, instructions are OK but with some common sense, it’s really easy to assemble. Price was great too!
gattz
Reviewed in the United States on September 22, 2024
I've only recently jumped in to Sim racing so I'm exploring options.I skipped right to a DD wheel and load cell pedals looking for a more realistic experience and am happy with my equipment (Moza R9, Simjack UT pedals), but I wanted a stand to secure the pedals better than jamming them up against a wall or some other object.I tried this stand because it looked sturdy from the images with the extra support bars.Upon arrival it was very easy to put together. Minor concerns are that some of the screws basically press in to the metal bars to secure it - this is probably ok but will leave marks on the bars and may come lose over time.Once it was all assembled, I tried rocking it around a bit and pressing on the wheel mounting plate. If you had some extreme spasm I guess the base could tip a bit, but for general use I didn't have any concerns with the sturdiness of this product.Ultimately, I returned this - because for all it's strengths, it just did not fit the gear I have.The pedal baseplate has only a few vertical slits on each side and I really struggled trying to find a way to mount my pedals/foot plate to it....you'll see some competitor stands that have many horizontal slits instead, and I think that's probably a more ideal design for Simjack/Simsonn style pedals. After disassembling my pedals and orienting them in various ways I found *one* way of sort of attaching it, but the limitations on how the baseplate met up with the footplate, if I pressed the brake the footplate would still angle up. This did not seem like it would hold up over the long-term so that was a no-go unfortunately.After that struggle, I then decided to try to mount my wheelbase. (Moza R9 v1) The plate this stand comes with does *not* align with the wheelbase holes. I wish this was more visible in images of various stands, but it's not technically on the compatibility list. *shrug*.Sure, I could drill more holes in all of these things, but then Im at the point where I question why I didnt make a stand from scratch instead of buying one....so this one just didnt work out for me.If you have one of the explicitly listed compatible models like a Logitech setup, this seems like a pretty good design otherwise.
Melissa Shuford
Reviewed in the United States on February 5, 2024
The main downfall about this product so far is that the directions SUCKED. It took my longer than it should have because the directions were not clear. The different bolts that came with it could have been placed in separate bags and labeled because it was so difficult to differentiate between many of the bolts. Very bad directions. The left and right adjustment stands were shipped with the pieces joined and it was nearly impossible to separate them in order to lower or raise the stand.
Phantom Photos
Reviewed in the United States on December 10, 2024
A must for a racing sim setup. Nice and sturdy haven’t tried to collapse it.
C.
Reviewed in the United States on October 15, 2024
Had been looking at these stands for a while and finally settled on this one. Happy that I did. Good price point and so far seems very solid. Wish the adjustments were a little quicker and easier but really only a one time hassle. Would highly recommend.
William A.
Reviewed in the United States on January 15, 2024
Takes about 15-20 minutes to assemble. Mounting holes lined up perfectly with my Logitech G29 wheel and pedals set. Plenty of extra screws and washers provided for mounting accessories. Instructions are clear and easy to follow.Everything in this stand is steel so it's very sturdy, but it's not super heavy-- maybe 30-40 pounds-- and it's easy to move around the room. The rubber feet stick well to my hardwood floor so the stand stays put when I'm pressing the pedals. The stand doesn't rock or wiggle when I crank the wheel.Overall, I'm very happy with this purchase.
Tara Parker
Reviewed in the United States on October 15, 2023
If you want a solid stand this one is excellent for the money. Rock solid when put together, easy to assemble and adjustable enough to be comfortable for almost anyone.
Mike
Reviewed in the United States on April 21, 2023
What can I say other than awesome 🤘😎 , this stand is solid and was super easy to put together. Don't know why so many other say the instructions are hard to understand 😂. They tell you and show you everything you need and gives you the tools to do it all. The reinforcement stands are great and hold it solid, no bending or shifting at all 😁. My G29 hooked right up with the bolts they provided and also straps to hold your wires too. That's a big plus to me and when it's all hooked it 🤘 this stand does the job. Nice real feel and you can adjust it to your liking of height and the top tilts so you can make it the angle you want. Would totally recommend and buy again if I had to. The price is fair and worth it for what you're getting. You're not gonna find a better stand for your racing steering wheel than this. Get this version, the upgraded one 😁 has the extra supports and holds strong 💪. The delivery was fast and shipped the next day 👌 after ordering. I'm happy 😁 and now it's race time 🤘😎... BIG THANK YOU to the seller
Recommended Products