Your cart is empty.
Your cart is empty. What is this?
The heatsink fins offer a solution to down the component's temps. This type of heatsink is suitable for cooling M.2 2280 SSD, for SM951, for SM961, for 950PRO, for XP941, etc.
What will I get?
Material: Copper Coated Graphene, Silicone
Type: Diagonal Stripes Groove Pattern
Heatsink Size: 70x20x1.5mm/2.75x0.79x0.06inch
In the package of:
1 x Copper Heatsink
1 x Pre-Cut Thermal Pad(1mm thick)
3 x Rubber Rings
Are there any advantages of the product?
With a smooth surface, is corrosion-proof and durable.
Made of copper material, can improve the heat dissipation efficiency greatly and ensure the stable operation of the hard disk.
The heatsink can achieve dual heat dissipation with the thermal pads.
How to use it?
2 Installation Methods :
One: Use the rubber rings to directly bind the heatsink and your components, easy to install.
Two: First, Drill a small hole for screw mounting; Second, clean the heatsink and your components; Third, use a screw tool to fix the three parts (heatsink, silicone pad, and your components) together.
What should I notice?
The thermal pads with two sides of protective film, please peel off before attaching.
Brandon
Reviewed in Canada on March 13, 2025
970 EVO Plus 2mm heatsink on Strix GL531GT
Jimmy
Reviewed in the United States on February 21, 2025
Use this for my secondary NVME that's tucked underneath my GPU. Needed the low clearance. Keeps it cooler than my main one.
Matt
Reviewed in Canada on January 20, 2025
Using on the back slot of a B650E-I in an NCASE M2 to cool and ADATA SSD, temps were in the 70C and the drive was throttling. Popped this on and temps are in the high 40C no no throttling even under heavy use. Great performance!
david malone
Reviewed in the United States on July 18, 2024
i got this and its little heavy. I own C&C . So i took some off the bottom. For me it better being lighter. Less to cool down faster. It works. THKS
OnlineShopper
Reviewed in the United States on February 23, 2024
Recently added this to my rpi5 nvme build using Geekworm's P579 & X1001 combo, and I'm glad to report that there was plenty of clearance at the top which was my main concern considering the small form-factor of the case. The securing rubber rings seem to me more like silicon or nylon, but they stretched fine to snug the drive and stay in place ensuring good conductivity. I used 3 of the 5 included. Installing the pad I recommend laying it on the short side first, then slowly lowering it as it sags to ensure no air is trapped; took me a few tries. Don't forget to remove the plastic from both sides of the pad. Overall, I'm very happy with the quality of this heatsink. See pictures.
Anonymous
Reviewed in the United States on November 16, 2024
I ordered the 6mm one for my HP laptop, and after installing it, it lowered the temp in my laptop by 15°C. I used 4 bands to hold it to my name drive. However there are no instructions. That's the reason I only give it 4 stars. I Broke 1 band while trying to install it because one edge was sharp.
Brian
Reviewed in the United States on October 6, 2024
Applied this MECCANIXITY Copper Heatsink Coated With Graphene onto a Hynix P41 2TB into a Acer Predator Helios 300 (PH315-51) and the results are outstanding the drive now idles in the 80F range and during heavy gaming never peaks over 120F so the combination of the heatsink and my laptop cooler (Llano v13) keeps the heat dissipation at acceptable levels which for tight spaces inside a laptop is a huge victory. Now I have a laptop that never experiences throttling due to heat buildup and I was able to drop my undervolting down to a minimal level without frame loss. Gaming is a joy with MECCANIXITY Graphene coated heatsink.. I RECOMMEND IT, HIGHLY!!
j. salk
Reviewed in the United States on April 28, 2024
I have used this heatsink to cool my WD_BLACK 4TB SN850X NVMe.Temperatures after a day was 44ºC which is pretty cool compared to usual temperatures of 57-58ºC.Six days of continuous use later the temperatures settled at 48ºC. This is an outstanding result.I will be replacing the heat sinks of other NVMe with this one.Highly recomended!
Keith Andrews
Reviewed in the United States on March 2, 2023
Installed this on my m.2 in my laptop and it definitely has lowered the temperature by 5-7 degrees Celsius. If you need a heatsink to fit a laptop I recommend giving this a shot. Only thing I wonder is how long the bands will last.
Loyal customer
Reviewed in the United Arab Emirates on February 1, 2023
Quality excellent, size is just perfect, temperature went much down than before specially during test by cristal disk , it would be great if they provide 2nd thermal pad and more stickyas the provided one is less sticky and extra elastic rubber
Darrell Kiley
Reviewed in the United States on November 24, 2023
I have this installed in my AYA NEO. I probably could have increased by another .5mm.I haven’t noticed any heat build up on my device since the installation.
Recommended Products
