Your cart is empty.
Your cart is empty.Product Description
IPX6 Waterproof
This LED turn signal lights is designed of IPX6 Waterproof, front is high quality clear lens sealed well on the edge. No matter it is rainy snowy or in extreme bad weather like hot summer, cold winter, it will be keep illuminating under these condition.
High-brightness LEDs
This motorcycle turn signals has clear lens with 2 pcs high quality LED chips,12V DC, very good quality and super bright, even it is too bright to see directly by eyes. The light is bright enough to be visible far from 100 meters away. It is visible not only at night, but also in clear sunny daytime
Adopted zinc die-cast
Resistant to shocks, absorbs vibrations while driving, protects chips and prolongs the life of turn signals. In addition, a PC lens is used to improve visibility compared to conventional lenses
Compatible with the following Motorcycles Models:
- Compatible with Harley Road Glide/Harley Street Glide/Harley Dyna/Harley Fatboy/Harley Pan America 1250/Harley Low Rider/Harley Heritage Softail/ Harley Forty Eight/Harley Iron/Harley Roadster/Harley Sportster...
- Compatible with HONDA FURY/HONDA Shadow Phanton/HONDA Shadow Aero/HONDA Rebel 1100T DCT/HONDA Rebel 1100/HONDA Rebel 500/HONDA Rebel 300/HONDA CBR1000RR/HONDA CBR600RR/HONDA CB1000R/HONDA CBR650R/HONDA CB650R/HONDA CBR500R/HONDA CB500F/HONDA CBR300R/HONDA CB300R/HONDA GROM/HONDA MONKEY ABS/HONDA SUPER CUB C125 ABS/HONDA TRAIL125/HONDA NAVI/HONDA AFRICA TWIN ADVENTURE SPORTS ES/HONDA AFRICA TWIN/HONDA NC750X DCT/HONDA CB500X/HONDA XR650L/HONDA CRF450RL/HONDA CRF300L RALLY /HONDA CRF300L/HONDA CRF300LS/HONDA XR150L/HONDA ADV150/HONDA PCX/HONDA RUCKUS/HONDA METROPOLITAN/HONDA CRF450X/HONDA CRF450RX/HONDA CRF250F/HONDA CRF250RX/HONDA CRF125F/HONDA CRF110F/HONDA CRF50F....
- Compatible with YAMAHA NMAX/YAMAHA X-MAX/YAMAHA Zuma/YAMAHA Tricity/YAMAHA D’elight/YAMAHA Stratoliner/YAMAHA Road Star/YAMAHA XT250/YAMAHA YZ450F/YAMAHA Aerox/YAMAHA TMAX/YAMAHA XV/YAMAHA YZ/YAMAHA WR 250F/YAMAHA Vino/YAMAHA XJR1300/YAMAHA Jog/YAMAHA Neo’s/YAMAHA Max/YAMAHA TT/YAMAHA MAJESTY/YAMAHA Royal Star/YAMAHA CygnusX/YAMAHA PW/YAMAHA Vity/YAMAHA XT/YAMAHA YBR-125/YAMAHA XJ/YAMAHA X-City/YAMAHA Xenter/YAMAHA XJ-R/YAMAHA C3/YAMAHA YS/YAMAHA MT-03/YAMAHA XSR/YAMAHA SMAX/YAMAHA STAR/YAMAHA Royal Star Venture.....
- Compatible with Kawasaki Vulcan 500/Suzuki Boulevard/Triumph Bonneville/Triumph Thunderbird/Triumph......
Package included: 2pcs led turn signal lights with wires,4pcs strappings
INSTALLATION INSTRUCTIONS
- Remove the existing indicators.
- Cut the wires of the original indicators between the indicator and the connector, allowing enough slack in the wire for the connection of the new indicator. By doing this the wiring loom stays untouched.
- Connect the red cable to positive (+) terminal and the black cable to negative (–) terminal. Make sure that the area where the wires emerge is protected from splash water.
- Mount the turn signals at the original place or by fabricating a bracket or relocated them at new place you want by drilling a 8 mm diameter hole there. Mount the turn signal in such a way that the beams run horizontally in your bike’s direction of travel. Proper alignment is important for your safety in traffic, as a bike with incorrectly aligned lights is easy to overlook on the road.
- Fasten the turn signal at 44 in-lbs (5 Nm) with the provided nut. DO NOT compress the thread too much! Use the lock washers or your own glue if necessary.
- Test the function of the turn signals.
- Route the cables in a way that they are protected from splash water and fasten them using zip ties.
- This completes the installation.
Dear customer, Thank you for choosing TECTEK. Please read and understand these instructions before deciding whether you would like to do the installation yourself or have it done by a professional.
Juan Pablo Domínguez
Reviewed in the United States on March 12, 2025
Muy bueno. A pesar de que es bien pequeño, alumbra muchísimo incluso de día. Lo recomiendo
Clay
Reviewed in the United States on March 11, 2025
Super tiny and super bright. The threads are quite short so if you are like me and need a bracket to mount these you might strip the bottom two threads, but other than that the quality was super solid
KHMcCarthy
Reviewed in the United States on February 3, 2025
These signals are cool, just what I was looking for, tiny LEDs. Also bought adapter to connect to 2022 KTM EXC 350F. Installed and they did not work. I plugged a two-wire signal into adapter and it blinked. The lights I received did not work, very disappointing.
Devon
Reviewed in the United States on January 27, 2025
Aluminum housing, bright LED's, Not sure if they are street legal in California but I'm willing to take the chance. I often use arm signals to go along with turn signals anyway. Using them on the rear of 2000 Husqvarna TE610 plated and stickered. Might get a set for the front as well to 86 the large Baja designs turns currently on the bike.
OHM
Reviewed in the United States on November 15, 2024
Work as they should
Karla Chavez
Reviewed in the United States on October 30, 2024
Great value, easy to install, bright
robert n hildebrand
Reviewed in the United States on April 7, 2024
I needed some flush turn signals for my dual sport motorcycle. It's always a challenge to find blinkers that won't break in that harsh application. These are very sturdy and housed in aluminum. They look fantastic on the bike and anyone behind you will know your intentions - they are bright! The only problem was one stopped working right away. Truthfully, maybe I did something wrong by accident like reversed polarity which some LEDs won't tolerate. I decided they were so nice I would try another set after returning the bad one (Hey, I don't KNOW I did something wrong - just allowing for the possibility) and getting another set. So far so good!
DMS
Reviewed in the United States on August 24, 2023
I used these on the rear fender of my '21 Beta 390 RRS. Solid aluminum housing, super low-profile, and the LED's are very bright even in daylight. They are so much smaller than any other options, they really disappear on the rear fender, exactly what I was looking for. The only downside is the wiring is thinner gauge than I would like, but a little wrap and attention to detail during install has so far sufficed. For $25, or even double that, it's a great option.
Recommended Products
$39.95
$ 19 .99 $19.99