Your cart is empty.
Your cart is empty.The SSVC-4. 1 Speaker Selector is a resistor-based, impedance matching speaker selector used for connecting up to four pairs of 4-ohm or 8-ohm speakers, while maintaining a safe impedance load for your amplifier or receiver. Each pair of speakers can be independently turned on or off using push buttons on the front panel, with no need for worrying about amplifier loading. Each zone features an independent volume control.
James Didiodato
Reviewed in Canada on January 20, 2025
Great product. Built well and works exactly as advertised. No complaints.
Kruger7734
Reviewed in the United States on July 17, 2024
Have a patio/Deck area that that I needed three sets of speakers and a subwoofer wired into a new Sonos amp. With three sets of speakers, I was a bit hesitant to wire them up to the Amp. But with the impedance matching of this switch, it works great. I can cut on or off any set of speakers that I want, and I have the Sub on its own channel. I can also have one set of speakers playing louder than the others with the volume control. This thing really solved a lot of issues that I was trying to work through. Been working for about 4 months with no issues at all. Would definitely buy again and really wish that I had found it a bit sooner.
D. R. lee
Reviewed in the United States on June 13, 2024
I have a patio that has two pairs of speakers spread apart almost thirty feet. After more than 19 years I've never been satisfied with the speaker volume control. The amp can control balance on each stereo pair but there's no fade like our cars have so I've aways heard one set as louder than the other and that changes every time I change position.I wired this unit up with one speaker per zone so I now have an individual volume control for each speaker.This unit was designed to individually control up to four pairs of stereo speakers so I'm very pleased it can handle indivuals too. The only reason I didn't give it five stars is because I save the fifth for longevity so great results for one afternoon isn't enough.
DJJD
Reviewed in the United States on February 28, 2024
A straight forward product that switches speaker pairs on and off, and controls volume of each pair.Quietly and effortlessly. Also comes in different configurations to control a few speaker pairs, or many. Has substantial heft and feels well made.
Paul E. Koehler
Reviewed in the United States on October 26, 2024
Left side of channel 2 stopped working after a few days. I swapped the speakers going to this channel and the problem followed the channel, so I know it's this box that is not working. I didn't keep the original packaging (who has room to keep the original packaging for everything they buy), so I can't return it for a refund or replacement. DON'T BUY THIS PRODUCT!
Elf Ron
Reviewed in the United States on October 25, 2024
I bought this to replace a 24 yr old solution from another maker that was worn out. I carefully researched the options and reviews and picked the Monoprice. I’m glad I did. It was easy to install, though any such installation involves many wires in tight places. It took 14G wire easily. It works much better than what it replaced ever did. Having volume controls to each speaker is a plus: one speaker needs a boost because it is much further from the source than the rest.
Fed G
Reviewed in the United States on October 12, 2024
Solid construction. I like it has weight to it.The back green bits come off to make it easier to insert the audio cables. It's a passive device so no power requiredVolume control per zone was something important I required and this deliveredWorth the buy if you're on the fence
matthew a. boyd
Reviewed in the United States on October 10, 2024
It seems to work just as described. It was definitely worth the extra money to get the volume control and individual speakers. That way I could compare different speakers without being influenced by the fact that some of them would be louder.
brian
Reviewed in Canada on July 15, 2023
Works well for three sets of smaller speakers (capable of four) thru a 100 watt total amp,volume controls nice after years of a box without them. The zone buttons would stick in when pushed when new, by loosening two small black screws on the circuit board, I could move the board over slightly so that the buttons aligned properly with the holes, problem solved.
Federico
Reviewed in Mexico on July 18, 2022
Niguna de las salidas de las zonas de lado izquierdo funciona.Una verdadera porqueria y perdida de dinero
Michael
Reviewed in Canada on December 20, 2022
This item was a Amazon repack. The box was beaten but the the unit was flawless and worked as it should. It was a pain adding wires for four pairs of speakers into the L & R output on the back of my amp. This device not only cleaned up the mess at the back of my amp for the speaker connections, it has volume and on/off control for each channel. I do believe the sound output in each room has improved as well. I was concerned about the impedance matching and it was a non issue. I continue to use my my impedance matching volume controls on the wall in each room, now set to 1 pair and not 4 pairs of speakers. Don’t really need the controls in each room now but they fill the hole in the wall.
VAG
Reviewed in the United States on February 23, 2020
I have ceiling speakers and wall speakers that have different impendances in 3 separate areas. This solved both the impedance issues and the switching and distribution problems nicely.The product details were accurate, however I was concerned about one of the pictures that shows speaker outputs -use 8 ohm speakers, and I included that because I think it needs to be changed. However the, documentation clearly states that 4 ohm to 8 ohm are acceptable (100 watts/channel continuous power handling capacity, 200 watts/channel peak. 5-ohm minimum amplifier impedance with four 4-ohm speakers selected, 6-ohm minimum with 8-ohm speakers). That is different from many other inexpensive speaker selectors with volume control.I really liked how the speaker wire is attached, the removable attachments that plug back in are easy to work with and make wiring simple.The Volume control is incremental but with numerous (more than 10) increments, and sounds smooth when changing volume.The product itself is heavy, construction on the outside was non-obtrusive and feels substantial.I am very pleased with the product, and highly recommend it
Yanny Lau
Reviewed in Australia on October 19, 2020
Unit worked perfectly and produced good sound without external power supply requirement.
Recommended Products
