Your cart is empty.
Your cart is empty.Product Description
-
The included microphone clip has anti-slip ribs which can hold the microphone well.
-
Metal T-handle adjustment for secure boom positioning; round boom design with large clamping area.
-
Non-slip rubber at the bottom is better to fixing on the smooth table top.
-
The mic stand comes with a 3/8 to 5/8 metal adapter, which is compatible with most types of mics.
Christian Cac
Reviewed in the United States on March 22, 2025
Te da una vista buena para podcast o video funciona con micrófono Podmic Rodé y shure sm 7 DB
Tobias Anderson
Reviewed in the United States on January 29, 2025
As described, quick shipping. Not as sturdy as I’d hoped. Works great on a budget
Russman
Reviewed in the United States on August 1, 2024
i love it its just a temporary stand for mecuz am going to build me a mic booth soonthis weekend,thank u so much, easy to put together too.nice and heavy. rubber pads on bottomso it work take off or slid off.
Client d'
Reviewed in France on May 27, 2024
parfait
Kunde
Reviewed in Germany on May 2, 2024
Gerne wieder!
Pelagie
Reviewed in Italy on January 19, 2024
Comodo e utile
Rel Hoffman
Reviewed in the United States on July 9, 2023
Was expecting a moderate lil' stand with okay material - it's actually quite solid! The rubber stoppers on the base work very well, and the base itself is super sleek! The crank on the boom arm are fantastic quality, as well as the mic clip it comes with. My only complaint is the stability. No matter how tight the nut/washer is, the top part of the stand always seems to have a bit of a wobble to it, like it's never fully 100% fastened...more like it's 90% of the way there. Not sure if anyone else has experienced this or not - it's not a deal breaker by any means, just something I wish weren't an issue.
raffaele V.
Reviewed in Italy on November 22, 2023
Solido e funzionale
EMS
Reviewed in the United Kingdom on January 9, 2022
Stands were perfect for what I needed them for. Very easy to assemble and height adjustable.Fitted the mics I had very well.
ergo
Reviewed in the United States on June 15, 2021
This review is for the Moukey MMS-5 Desk Mic StandWhat I like about this mic stand far exceeds what i don't like.What I like:The Moukey MMS-5 Desk Mic Stand is small enough to fit closely and mic an amp. The moving parts function reliably well. Knobs and boom harness are plastic, but they are well formed and finished. The base, vertical post, and boom arm are metal.I also have one of these mic stands at my computer with an Audio-Technica at2020 USB mic for zooming. Most other portable boom mic stands have long boom arms that get in the way of other wiring/equipment considerations. I bought 2 of these moukeys, then I bought 2 more when I realized the advantage for using with guitar amplifiers. I'm planning to buy another.What I don't like:The base could be a little heavier to compensate for the full reach of the boom arm (i.e. if I fully extend the boom or even extend it half-way with the audio technica at2020 usb mic, it will tip over). The only other thing I don't like is the 3 foam pads on the bottom of the base. They are thicker than need be and contribute to potential wobble if mic weight/boom reach is not carefully balanced. The design would be better served with a full ring of padding.Overall:I'm pleased. The parts work reliably, the design is pleasant to look at, and the size is better for my needs.
Brian
Reviewed in the United States on August 21, 2020
This product is fine for my purpose which is to have a mic at mouth level when I am at my desktop on a video call or recording audio. It has a heavy sturdy base and seems to be well made of all metal components. It was easy to assemble and it attached perfectly to my Yeti nano mic. I did need to use the adapter that came with the stand.The stand was at the right height without any extension of the upright pole. In fact it could have been a couple inches shorter but I was able to angle it slightly downwards. I am 5' 8" so if you are taller it is easily adjustable. I think it was good value and did what I needed it to do to have the mic at mouth level without being seen in the video. I attach a picture. The monitor is 27". The Yeti Nano could stand on the desktop but was a little short and I had to move it close for better quality audio. This allowed the stand to be on the side of the monitor and extend to my mouth.
Ashley M.
Reviewed in the United States on January 8, 2020
I ordered this mic stand yesterday and it arrived on my doorstep today. I had things I had to take care of when I first got home from work, so I had to wait a few hours to open it. I was pleasantly surprised with how heavy the base was. When I was first considering buying the particular mic stand, I wasn't certain it would hold the weight of my Shure SM7B mic that I use for my recordings. So I started to put the pieces together and I opened the microphone clip that comes with the stand and two small, obviously broken pieces fell out the package into my hand. The pieces, as well as where they broke off the microphone, are pictured, as well as the very slightly damaged box. I hadn't even noticed what little damage was on the box until after I'd already opened it. (It had been put in an Amazon yellow packing folder so when I removed it, I did not think to check over the box before opening it). It was a bummer that the clip was broken, but I decided to go ahead and test to make sure the Shure would be fine on it. From what all I can tell, it seems like it can easily hold the weight of the microphone, which was my biggest concern. However, I will say that the rising and lower mechanism of the stand isn't great. After raising it, the top part now gets super stuck when it's put to the lowest point and I personally have trouble getting it to raise again. Assuming most people would not need to raise and lower it too much, that may not be completely necessary and it seems to be steady once set. I will need to further use the stand to make sure it's actually going to work for my needs before I give my final rating on the product. As of right now, because it arrived with a piece broken, I am rating it with 3 stars. If it proves to be as steady as I think it is, I'll raise my review.
Recommended Products