Your cart is empty.
Your cart is empty.EVOSID MTB Bike Crankset, Bicycle Crank Arm Set 165/170/175MM R-SPEC Trail Enduro Dub 29 Hollow Bike Crank Spindle CNC Suitable for GXP DH AM XC
Geoff Gale
Reviewed in the United States on March 10, 2025
Look the same as the major brand. Heavy use from Buke Parks, Flow, Tech. Iām trying to hammer them as much as possible. I would love to see a 165mm, 160mm version. Buy insurance just in case. Long Term review in future šš»
Cody Coleman
Reviewed in the United States on March 1, 2025
Awesome cranks for the price. I had a little issue with the preload adjustment ring in the beginning. I couldn't get it adjusted properly and ended up breaking the tensioning mount for the screw. I recommend buying the SRAM preload adjustment kit along with these cranks. It is $10 and well worth not having to deal with the hassle. It worked great first attempt and did not loosen.
A.J. Quintanar
Reviewed in the United States on February 7, 2025
Bought these on a whim to see how the faired. To my surprise the work great and feel extremely solid and look like total jewelry . I wish the had a set for the turbo levo and I would swap cranks on that bike as well.
Davecit artifex
Reviewed in the United States on February 2, 2025
these are actually my first experience with a mtb crankset. Got them to replace the tubular cro-moly bmx cranks on my single speed dirt jumper. Couldn't resist the chance to drop some weight and try something new. I opted for a genuine Sram BB since my bike has a euro/BSA shell. Getting the cranks centered required an specialty aftermarket spacer. Other than that i love this new set-up, they have taken the same hard landings and feel just as strong despite being over a pound lighter than any bmx-style cranks.
Scott Davis
Reviewed in the United States on February 12, 2025
It is a cheap Chinese knock off of a high quality American made part. I am using it on a cheap, Chinese bike.
Christopher A. James
Reviewed in the United States on January 12, 2025
The crank arms seem fine, but the allen bolt to attach it to the spindle is soft and rounded out before it was anywhere close to the required torque. I'm not sure it's safe to ride in this condition.The preload ring uses a T10 which isn't standard for any other part on a bike, so you'll need a specific torx bit just for that.Additionally the preload ring isn't really compatible with with a SRAM pressfit BB as the flat outer edge runs on the metal of the bottom bracket.Honestly this just isn't well thought out.
Tony W.
Reviewed in the United States on September 8, 2024
The crank arms looked really good but I noticed the preload ring is missing the pinch bolt. The picture shows a blank hole where the bolt should be. I requested a replacement and returned this. Hopefully the replacement one has the bolt.
jhon wilber barrantes
Reviewed in the United States on May 6, 2024
Las bielas son una muy buena compra y la bicicleta que muy bonita
Recommended Products
$141.29
$ 56 .99 $56.99