Your cart is empty.
Your cart is empty.Product Description
Stephen F Carr
Reviewed in the United States on February 19, 2025
Very good quality. Two strong set screws to hold the speaker wire and a solid robust housing. I’ve tried several different brands and so far, these are the best I’ve found. The specifications note that the external housing is insulated however I also used a heat shrink sleeve over the completed assembly just to make sure no risk of shorts.A nice touch is that extra set screws are provided in case of loss.Would definitely buy these again.
anthony arrigoni
Reviewed in the United States on February 18, 2025
I got these after watching an independent reviewer on YouTube compare and test 10 different banana plugs and these had the lowest resistance out of them all, minus a pair that were hundreds of dollars, these are basically as good but actually affordable.Only thing I’ll say is don’t make the mistake of over over tightening the screws or they will break like 2 of mine did.I still got them real tight but you just can’t force more after it gets tight.These say they have a copper core as well which is much better than steel like most others use.And they look nice 👍
Guddu
Reviewed in the United States on February 18, 2025
These are well made plugs, front connection springs provide maximum contact area and these are super easy to install.I used these with 12 AWG cables without any issues.Highly Recommended
Darwindan
Reviewed in the United States on January 21, 2025
Great quality banana plugs. Holds wire firmly with two screws, not just one. They work very well for me.
MiKe72
Reviewed in Germany on April 4, 2025
Die Teile kamen schnell an. Ohne großes Schnickschnack, verpackt in einem Polybeutel, somit auch umweltfreundlich.Die Teile lassen sich sehr gut auseinandernehmen, ebenso, mit verschraubtem Kabel, auch dementsprechend zusammenschrauben.Was heißen soll, dass die Qualität, die Passgenauigkeit absolut stimmt!Hervorzuheben ist die "Mechanik", bei der die Kabelenden von 2 Schräubchen gesichert werden.Dass die Stecker, wie auf dem Bild zu sehen, im Lautsprecher nicht ganz "anschlagen", ist so dermaßen unrelevant. Es mindert die Übertragung des Signals keinesfalls (und wer schaut schon ständig an die Anschlüsse?)Verarbeitung top, Handling top, sitzen fest in der Buchse!Kaufempfehlung!
remco van
Reviewed in the Netherlands on April 2, 2025
Deze zijn helemaal goed.
Shishir Khobragade
Reviewed in India on April 14, 2025
Working as expected.
average john
Reviewed in the United States on March 18, 2024
I bought these because my Yamaha R-N800A, like other Yamaha amps I've used, has one glaring flaw: really crappy speaker wire terminals. They are flimsy-feeling, not very well textured plastic, and they are way too close together. As a result, it's tough to get bare wire really set firmly into them; to the point that after a few weeks the right channel was cutting out because the terminal had come lose and was allowing play in the wire connection.I ended up choosing these banana plugs because of the cool look and a fondness for the Nakamichi name from my youth. They were very easy to set-up and firmly clamp down on the wire with dual set-screws. The plugs seat very firmly into to speaker terminals. (In fact, at first I thought maybe I had somehow bought some strange, unknown size that wouldn't fit. Nope. Tjhey're just that snug.) And, IMO, they did end up looking cool installed.As for performance, these kind of things are... for me... oh so hard to tell. But I do think I noticed a widened sound stage with these in place. Perhaps not. And perhaps that wouldn't be the case with amps that have better speaker terminals than Yamaha's. But I do believe it to be true.I would buy these again without thinking twice.
xavier
Reviewed in the United States on October 9, 2024
If you're looking for a straightforward way to improve your audio setup, these banana plugs are a great choice. They're well-made, easy to install, and deliver on their promise of improved conductivity.The gold plating ensures a secure connection, and the build quality feels solid. While they may not be the most glamorous component in your system, they're a reliable and affordable upgrade that can make a noticeable difference in sound quality.
アールエーアール鈴鹿
Reviewed in Japan on October 27, 2024
The media could not be loaded.
Anonymous
Reviewed in Australia on February 6, 2023
These are fantastic and well made. But note, each plug has two screws to tighten, which require a tiny screwdriver. Each speaker (in my system) uses four plugs, two on each end. That's 72 screws, and a few screwdriver slips/stabs along the way, to setup a 5.2.4 speaker configuration... This design is not for the weak wristed. Order up a size to make tightening the screws easier, especially if you using 12 AWG cables.
Punk Goblin
Reviewed in the United States on February 18, 2023
Considering the reputation of Nakamichi and the fact these were less than $8 I was dubious about getting authentic parts. After using them the quality seems top-notch in every way with none of the aberrations typical of cheap imitations (poor quality uneven branding/silk screening, burrs, poor machining causing gritty, uneven screw connections and driver slots that aren't deep enough, uneven depth/width, misfitting parts, inconsistent sizing, etc). These look great, work great, fit great; it's a simple part and I think the price is reasonable but some brands are over 2x the cost and I can't see them being 2x the quality and some generic parts are the same cost and I can't see them matching this quality, I only found one about $1 cheaper from some no-name Chinese manufacturer and if these aren't genuine Japanese parts they're outsourced to a higher quality standard that is up to Nakamichi's audiophile quality reputation.
Chad
Reviewed in the United States on April 24, 2023
Bought these to match the other set I purchased. They mount well and have a good solid connection on terminals. I don't see this connection loosening over time.May require modification to fit larger guage cables. As over tightening can and will break the screws. As it did with mine. I was able to grind down the mounting screws enough to be able to tighten down my wires and fit the sleeve over top. This WILL need to be done for thicker gauge cables to be able to mount correctly. Otherwise you will just have to forfeit the cover.Just a reminder, If you plan to grind down the screws. Wear PPE Personal Protective Equipment. Such as Goggles and a Mask.These would be excellent if only they provided two sets of mounting screws. One short for larger gauge cables and one long set for small guage wire.I still recommend.
Recommended Products
$43.99
$ 19 .99 $19.99
$59.83
$ 28 .99 $28.99