Your cart is empty.
Your cart is empty.Product Description
The Mroinge M701 Non Programmable Thermostat is the perfect solution for homeowners looking for a reliable and easy-to-use thermostat for their heating and cooling systems. With its easy installation process, even Middle-Aged Elderly People can effortlessly set it up without any hassle. The thermostat features a large display with clear and easy-to-read numbers, making it convenient for anyone to check the temperature and humidity levels at a glance.
Designed to be compatible with Gas, Oil, or Electric Furnaces Systems, this thermostat offers versatility and flexibility for different heating options. You can rest assured knowing that it will seamlessly integrate with your existing system. The thermostat operates on 2 AAA batteries, ensuring long-lasting and reliable performance.
With the heating and cooling swing feature, you have the flexibility to set the temperature range within which the thermostat will activate the heating or cooling system. This allows for optimal comfort and energy efficiency. Additionally, the thermostat offers temperature calibration, allowing you to fine-tune the temperature readings for precise control.
One of the standout features of this thermostat is the built-in compressor delay protection. This feature helps to extend the lifespan of your heating and cooling system by preventing frequent cycling, reducing wear and tear on the compressor.
In summary, the Non Programmable Thermostat is a reliable and user-friendly option for homeowners seeking a hassle-free solution for their heating and cooling needs. Its easy installation, large display, compatibility with various systems, and additional features such as temperature calibration and compressor delay protection make it a top choice for anyone looking for a non-programmable thermostat.
Compatible with Various Systems:
This thermostat is suitable for Gas, Oil, or Electric Furnaces Systems, ensuring compatibility with a wide range of heating and cooling options. (compatible with 85% of systems).
Kindly Reminder: when heating, the fan cannot be turned on in AUTO mode, you need to turn the back switch to ELEC position.
WARNING: Does Not Work with Heat Pump Systems, Does Not Work Aux heating and Emergency heating, Does Not Work Multi-Stage Systems, Does Not Work RV, Does Not Work 120/240V Electric Baseboard / Line Volt Systems.
Carolag
Reviewed in the United States on March 5, 2025
I'm very proud to say I installed this myself because the programmable one a friend put it was awful. I watched him install first one, think it was too smart for my old furnace, so ordered this. Instructions very clear, easy to install and simple yet exactly what I needed to run furnace. Touch control raises, lowers temp. Large reading, and bright. No fussing around with complicated times, etc.
Stephen
Reviewed in the United States on March 1, 2025
Nice large digital display, also shows humidity readout. Very easy to install, because it came with tabs to mark what wires go where. Works like a champ!
Gwen barber
Reviewed in Canada on February 18, 2025
Perfect ,easy to install
alppasta
Reviewed in the United States on January 31, 2025
Works perfect, easy to install.
Customer
Reviewed in the United States on January 2, 2025
I bought this as a replacement for a Nest thermostat that was installed by a HVAC company at my grandmother's house. While the Nest was clear to see, it was challenging for her to navigate and switch the operations. This solved it, with physical buttons for up and down and sliders for the different modes. The large number is the current temperature and the smaller is the set point. The blue backlight comes on when you press a button and turns off after 5 seconds. It saves the different set points between modes which is helpful when changing seasons. It was incredibly simple to install myself.The only thing I had to change was the display cycle, which can show temperature and humidity. To make it easy for her, I set it to temperature only (this is found in the manual that comes with it).
fire105
Reviewed in the United States on August 30, 2024
For the pros, nice display and easy to operate and you can calibrate the temp. and swing settings.The one big Con, I adjusted the swing setting to the minimum which is 2 tenths below and 2 tenths above the temperature chosen. But it wont shut the ac off until its almost 1 degree lower than set and wont turn on until almost 1 degree above setting.---This makes for long run times and long time before it comes back on which causes too much temperature fluctuation. It does the same for both heat and AC I have replaced this unit with a Honeywell non programmable digital thermostat and it is way more accurate and shuts off and turns on when it should. I originally rated this a 2 but after having the Honeywell that is way more accurate and functions better I’m giving this one a 1. Having a big bright display and humidity gage does not make up for its inaccuracies. Too bad Amazon doesn’t show the more negative reviews up front.
speaks the truth
Reviewed in the United States on February 19, 2024
I purchased this thermostat to resolve a heater continually running in the heat cycle, up to 10° past the set point. This thermostat didn't resolve the problem immediately, until a SWITCH on the inside of the thermostat was switched from a gas heat mode to an electric heat mode. I have hot water heat but the switch didn't have the hot water heat as an option, but I switched it from gas to electric anyway, and wala, that resolved the problem that has eaten my lunch for over 3 years. So if you buy this thermostat make sure the SWITCH mode you set applies to the type of heat you have. Set the switch to electric if you have electric or water heat, and set it to gas, only if you have a gas furnace. There are many other good things I could say about this thermostat that are vidisplayed on the display window, but I leave it to you to discover all the good things about this thermostat. You will be happy you installed this thermostat. BTW, the instructions to install are great and easy to understand, better than any other thermostat I used before. I write the truth here, nothing but the truth, period.
Johnie M. Driver
Reviewed in the United States on November 20, 2024
The fan switch seems loose and does not feel firmly positioned.
Richard has Answers
Reviewed in the United States on January 13, 2024
I gave this 4 stars because, as others have noted, the install is a bit tricky. On the upside, it works fine and the display is huge.Here’s my words of caution: (mind you, I’m a contractor by trade and a pretty clever mechanic)You’ll need a very small Phillips screwdriver for the wire connections. Almost eyeglass size. A P1 is too big. The actual wire terminal shape does not match the instruction diagram, so follow the letters, not the picture. There are no instructions on how to separate the back mounting plate from the front and because of a lot of friction in the internal pins this process is kinda hard, in fact I thought for a minute I’d break the whole thing getting it apart. Finally teased it apart by applying gentle pressure and rocking it back and forth.Another important point…the mounting screws(not supplied) MUST be flush with mounting plate. If they protrude above the plate the unit will not engage far enough to snap in, so be careful on screw selection. Should be a little clearance internally, but there isn’t.Aside from that, it works fine in my “heat only” set up and the display is huge enough for my security camera to read from across the room, so I can check it when I’m out of town.I guess if you’re at all mechanically challenged, I’d hire a clever professional to install this.
Recommended Products