Your cart is empty.
Your cart is empty.Product Description
Miter Gauge with Extension Fence
Includes :(1)Miter Gauge Assembly ,(1)Extension Fence ,(1)Flip Stop Assembly, (1) Handle, (3)Allen Key,(1)Scale Tape , and Other Accessories
Reversible Fence
The fence was installed to operate in the right
The miter gauge fence can be reversed for operation on either side of the saw blade, making it versatile for different table saw configurations
The fence was installed to operate in the left
The extendable aluminum fence offers extra support for larger cuts, adjustable from 22” to 36”, providing you with the flexibility needed for various wood sizes
Precision Angle Adjustment
The built-in protractor allows for precise angle adjustments with ratchet pin plates and locking mechanisms
Sliding Fence Faceplates
It comes with Sliding Nuts and Round Screws..
These accessories allow you to create custom sliding fence faceplates easily
Fence Gliding Pads
Avoiding damage to the table saw's top from contact with the fence
Flip Stop
With the adjustable flip stop, you can easily set repeatable cuts without re-measuring each time
Joshua Behan
Reviewed in the United States on March 18, 2025
I recently upgraded my table saw with the O'SKOOL Miter Gauge Extension Fence System, and it has significantly improved my woodworking projects. The extendable aluminum fence, adjustable from 22 to 36 inches, provides excellent support for larger cuts, offering the flexibility needed for various woodworking tasks. Installation was straightforward, and the build quality is impressive, ensuring durability and precision. This extension fence has enhanced the accuracy and safety of my cuts, making it an invaluable addition to my workshop. I highly recommend it to fellow woodworkers seeking to elevate their craftsmanship.
Phooey
Reviewed in the United States on February 18, 2025
I just got the chance to use this on my Delta 36-725 table saw and it worked beautifully, giving me perfectly repeatable crosscuts and easily switching from the right to left t-slots.Assembly took a little bit of time, with getting the adhesive rule on properly being the most difficult part, but still not that difficult. I don't intent to rely on the measurements on the fence for more than a guideline anyway so if it's off 1/16" it's no big deal. Build quality is really nice; I as able to get everything square and it glides through the t-slot without any play after proper adjustment. The flip-stop is super handy and easily adjustable.Overall I'm very happy with this miter gauge. I may build on to it for being able to support tall pieces and/or cross the blade to utilize both tracks for a more sled-like operation so I suppose some mounting holes in the fence would have been a nice addition, but even as-is I find it very useful.
rer
Reviewed in the United States on February 14, 2025
works as indicated
Customer
Reviewed in the United Kingdom on January 26, 2025
The unit seems well made and I can see why most of the reviews praise it. However, I am using this on an Evolution RB255 TBL table saw and the expansion collars in the track bar will not provide a zero clearance fit in any orientation, in either track slot. I tried the recommended orientation and the fit is loose on my table. no amount of adjustment will result in a zero clearance fit. When I say "loose" it's about 1mm which is about the same as the standard mitre gauge that came with the table. So in this respect it is not an upgrade for me. It's a big disappointment.
S. Blakley
Reviewed in the United States on January 20, 2025
I needed a miter gauge and fence that expands to the right instead of the left. This one was easy enough to assemble in the that configuration. Once assembled it can be configured in several lengths and set to any angle. Once everything is tightened down, the thing is solid. However, since it is made from aluminum care should be taken not to over-tighten any of the fasteners. It's not the cylinder head on a diesel... Just a little over hand tight will do.The quality of this miter gauge is spot on. All of the parts fit together exactly as they should. The precision and squareness is spot on. Along with the miter gauge, telescoping fence, and settable stop; this kit comes with good instructions, some adhesive back measuring tape, and screws to mouth additional items such as a sacrificial wood face.The gauge and fence are easy top operate and the face of the fence stays true even when extended. This kit would be idea for a table saw, but I'll be using it on a band saw and a router table as my table saw has a sliding miter built in.This is my second woodworking item from O'Skool, and I am pleased with both of them.
Honest Review
Reviewed in the United States on January 17, 2025
I’m a DIY’r and really like this tool. First, the miter gauge is so much better than what came with my table saw – it has multiple stops at every 5 degrees, an ability to make adjustments to get it perfectly square (although mine came already square), it slides almost “play free” on my saw, and you can make some micro adjustments using the expansion collars to get it exactly how you want it (zero play).I haven’t used an extension fence before, instead I had to make my own jigs to cross cut larger pieces of wood – this is sooo much easier to use. Similar to the miter gauge, my fence came already square, but you can make minor corrections to get it square if it isn’t already. The stop is also an awesome piece of this tool for making repetitive / same sized cuts again and again. The fence can also be used on either side of the blade.The tool is well built and has some weight to it… not in a bad way, weight like it’s a solid tool. The weight also gives it some stability, which I really like. And not that it matters, but the color and look of the gauge and fence is cool too – functional and looks good.I’m using with a Skil TS6307 and it works great.I don’t have experience with any other similar tools to compare it to, so it could be other options have small niceties this one doesn’t… not sure, but I’m really glad I have this for my table saw.The only negative is having to figure out how to correctly get the measuring tape cut and installed – I would suggest dry fitting first to make sure it gets applied correctly.
Nate D.
Reviewed in the United States on January 12, 2025
The protractor and locking plate are made from thick gauge steel. The fence is built from two nested aluminum extrusions with orange anodizing. The angle stop and its slide are both solid metal. The miter slot bar is the only large plastic part and it is built from solid stock. All around this is a tool built to last a lifetime if used with care.Upon receiving this miter gauge, I threw away the cheap plastic one that came with my table saw. The O'skool gauge is capable of making repeated precision cuts and adjustments are quick. The inner aluminum extrusion allows the main fence to be extended from 22 to 36 inches. The included stop is easy to move and can rotate out of the way when it is not needed. Best of all, the protractor is solidly built and can be quickly adjusted. It includes a locking plate that moves in 5 degree increments, but any angle can be set.When the miter gauge arrives, the parts are disassembled for shipping. Most of the parts are easy to put together, with one exception. The measurement tape is not installed on the fence. It arrives as a sticker/label that must be cut to length to be applied to the three lengths of the fence. The process is not terribly difficult, but it requires precision and is unforgiving of mistakes (the accuracy of your measurements depends on getting this right).
Recommended Products