Your cart is empty.
Your cart is empty.Product Description
Multi-Angle Vise, Base Type Vacuum, Jaw Width 2-1/2 In., Max. Opening 2-1/4 In., Throat Depth 1-3/8 In., Pipe Capacity 1 to 2 In., Jaw Face Smooth, Jaw Material Nylon, Material Cast Zinc, Swivel Angle 360 Degrees , Overall Length 7-1/2 In., Overall Width 6 In., Overall Height 6-1/8 In., Features Attaches to Any Smooth, Non-Porous Flat Surface w/Flip a Lever, Single Knob Controls Head Movement Through 3 Planes, Nylon jaws offer excellent electrical insulation and gentle holding power
From the Manufacturer
The PanaVise 381 vacuum base PanaVise is a work-holding tool base and head combination designed for use on smooth, non-porous surfaces away from traditional work benches. The base includes a smooth rubber pad and lever combination which creates a vacuum that secures the unit to surfaces. The head assembly component opens to 2-1/2" (63.5 mm), and clamps down with smooth insulated nylon jaws for gentle holding power. Other features include rugged, yet lightweight construction and a PanaVise "split-ball" adjustment element utilizing single-knob controls for head adjustment on three separate planes (tilt, turn and rotate).
Two-piece work-holding tool that creates a vacuum securing its base to smooth surfaces.Portable Clamp-free Holding Power
The 381 vacuum base PanaVise is a portable two-piece work-holding tool suitable for hobby, electronics and small home repairs, that consists of the PanaVise 380 vacuum base and the 303 standard vise head. The base component of the unit adheres to smooth, non-porous surfaces via the vacuum action that the rubber pad and flip handle at its bottom create when engaged. The vacuum action creates a stable and reliable working platform that eliminates the need for traditional bench clamps or weighted accessories. The combined unit weighs 2.8 lbs. (1.3 kg), is portable and easy to transport. The rubber vacuum pad is replaceable if its holding power is ever compromised by wear.
The standard 303 vise head assembly utilizes smooth, removable nylon jaws along its opening that measure 2-1/2" (63.5 mm) by 1/2" tall (12.6 mm). These secure tough small jobs without scratching and offer excellent electrical insulation and gentle holding power. The overall vise opening width between jaws is 2-1/4" (57.1 mm). Because exposure to heat sources is common in vise applications such as gluing, circuit board wiring, jewelry making and use around handheld power tools, the vise head assembly is continuously heat tolerance to 200 degrees F (93 degrees C), and intermittent heat tolerant up to 300 degrees F (149 degrees C).
Dependable placement along horizontal or vertical planes where the vise is needed.Convenient adjustability across three separate planes.
Tilt, Turn and Rotate Functionality
The PanaVise 381 work-holding tool utilizes PanaVise "split-ball" adjustment functionality at the point of 380 vacuum base and the included 303 standard head. Once an item is secured in the vise head, the split-ball system built into the top portion of the base allows a user to maneuver the item along three separate planes using a single knob to make the adjustments. The mobility range of the model 381's split-ball system is a 90-degree tilt to the side, along with either an angled rotation, or level turn range of 360 degrees. This range of mobility allows a user to rearrange work items into any position, which limits the need to adjust the overall position of the vise or the item within the vise.
Additional Vise Head Options
In addition to the uses possible with the included, the 381 vacuum base PanaVise is intended for use across a wide range of applications and is designed to be compatible with a variety of vise heads. The base works with all PanaVise 300 series vise heads, the PV Jr. model 203 head or any 5/8" diameter shaft tool accessory.
Key Features
- Vacuum base and vise head combination for portable use on any smooth, non-porous surface
- Rubber pad of base creates vacuum action that hold tool on vertical or horizontal planes
- Flip lever allows for fast engagement and disengagement of vacuum
- The easy-to-use "split-ball" adjustment element utilizes single-knob controls for head movement through three separate planes
- Rubber vacuum pad is replaceable
- Base is compatible with additional 300 series vise heads, or any 5/8" diameter shaft tool accessory (all sold separately)
- Heat-tolerant nylon jaws
Specifications
Overall 380 Vacuum Base 303 Standard Vise Head- Height: 6-1/8" (155.6 mm)
- Weight: 2.8 lbs. (1.3 kg)
- 3-plane adjustability
- Rotation: 360 degrees
- Turn: 360 degrees
- Tilt: 90 degrees
- Height: 3-1/4" (82.5 mm)
- Weight: 1.7 lbs. (0.8 kg)
- Shaft diameter accepted: 5/8" (15.9 mm)
- Base diameter: 5-1/8" x 4-1/4" (130.2 mm x108 mm)
- Height: 4-1/4" (108 mm)
- Weight: 1.5 lbs. (0.7 kg)
- Throat depth: 1-3/8" (34.9 mm)
- Shaft diameter accepted: 5/8" (15.9 mm)
- Shaft length: 2-1/8" (54 mm)
- Jaws
- Material: Nylon
- Opening: Up to 2-1/4" (57.1 mm) maximum
- Dimensions: 2-1/2" (63.5 mm) (w) x 1/2" (12.6 mm) (h)
- Heat tolerance: Continuous up to 200 degrees F (93 degrees C); Intermittent up to 300 degrees F (149 degrees C)
What's in the Box?
- PanaVise 381 Vacuum Base PanaVise (380 vacuum base, 303 standard vise head)
- User's manual and warranty information
Limited Lifetime Warranty
All PanaVise products are warranted against defective materials and/or workmanship to all original consumer owners from the date of original consumer purchase for the lifetime of ownership by the original consumer owner. In the event of defective materials and/or workmanship, PanaVise Products, Inc. will, without charge, repair or replace, at its option, the defective product within 60-days from the receipt of the defective product. The Warranty does not apply to damage not resulting from defective materials and/or workmanship while in the possession of the original consumer or to unreasonable use by the original consumer, which includes but is not limited to improper installation, or failure to provide reasonable and necessary maintenance.
About PanaVise
Founded in 1957 by tool and die maker Otto Colbert and currently headquartered in Reno, Nevada, PanaVise is a leader in work-holding products. Over the years, a natural outgrowth of this expertise has been continued development of other items which hold things securely and offer a wide range of motion. Important areas in which this has been applied include, Electronics, CCTV Camera Mounts, and Audio/Video Mounts, earning PanaVise the nickname the "the hold it anywhere you want it company."
Philip
Reviewed in the United States on November 6, 2024
Spray a little water on the base or the non-porous surface and it will hold a vacuum for days.
JustYourAverageJoe
Reviewed in the United States on December 8, 2021
I've been a fan of Panavise for over 30 years, back when I owned an electronic repair business. When we closed the business we liquidated a lot of tools, among them was a Panavise. I've been presented with an opportunity to get back into the electronic repair and am slowly putting my shop back together. One of the differences is that the old Panavise had two arms that would support the board by the edge. That's great for adding stability to your workpiece, but it limited us to boards less that 11" in width. This vise, while isn't as stable, still works well enough to support the work and doesn't limit your board size. Plus, I'm able to hold other items besides printed circuit boards. The suction cup is very strong (as long as your workbench top is smooth) and doesn't budge an inch. Yes, there are cheaper versions but I don't think you'll find the quality in those that you'll find with Panavise. You get what you pay for.
Marvin
Reviewed in the United States on September 2, 2020
I purchased this to hold small parts for polishing. The suction base attaches well to a very smooth work surface and hold fast. The overall quality seems excellent. It is a bit pricey but its performance is excellent. Time will tell how the suction base holds up.
Dennis Mabrey
Reviewed in the United States on October 24, 2019
Vise works great. The suction power can be good for "very" short periods but if used for more than 5 min I suggest you re-suction it to the table.
James Anderson
Reviewed in Canada on January 20, 2019
The vise came in a timely fashion. Goes together nicely and takes down for storage. Works better than expected and can be upgraded or modified with accessories to suit your needs.Good Product, I'd recommend it to anyone needing a vise of this nature.
Darcy
Reviewed in Canada on November 3, 2018
The vice arrived today. I have used panavice at work in the past and now I am happy to own one myself.
CaliCanuck
Reviewed in Canada on September 28, 2017
Solid table top vice. No complaints. Wipe the table surface and rubber pad on the vice, there will be no slipping on kitchen granite.
Customer
Reviewed in the United Kingdom on December 20, 2017
Worked fine for the first few months although the vacuum base would get loose pretty often. Afterwards the threads on the screws that hold in the jaws became wallered out and you couldn't hold the jaws fixed anymore. Definitly not a replacement for a proper, sturdy vise or any sort of hard use.
Richard Mellersh
Reviewed in the United Kingdom on June 12, 2016
Perfect
ATT
Reviewed in the United States on January 11, 2016
This is a very sturdy, well made vise. Once I received it, I went ahead and ordered several other heads, bases and jaws. This particular model will stick to a very smooth surface quite well. I was hoping it would stay suctioned to my hardwood table but it will not. This isn't a deal breaker for me since I do not need to put large amounts of force on it. I did order the weighed base and that should work out better. I checked out and really wanted the surface plate base but I couldn't justify that much money for it.
nerdmarshall
Reviewed in the United States on December 1, 2014
I don't think I could say enough positive things about this vise. I admit, I expected it to work perfectly when I ordered it, imagining myself sticking it to my office desk for soldering projects and other hobby work.Sure enough, it works *exactly* as I expected. I was not disappointed! I absolutely love that I can secure this vise to my work table whenever I need it, and then easily move it out of the way when I'm done. That's something you just don't get with a traditional, permanent installation vise. This probably isn't going to work at all on any surface that isn't smooth (like a wooden workshop work bench), but for hobby use in a kitchen or office, it's absolutely fantastic. Now, I haven't done any heavy duty work with this thing, I use it primarily for soldering and other work that doesn't require a lot of force to be applied to the vise, so I don't know how well it will hold up to that sort of work.Pros:* Installs in seconds to any smooth surface* Can be removed in about 2 seconds* Holds *very* tight to the surface where it has been suction-installed* The swivel and re-positioning function of the vise is very, very easy to use, and makes hobby work so much easier. It's extremely convenient to be able to rotate and angle the vise grip in a matter of secondsCons:* May not stay secured to your table/desk surface if great sideways force is applied to whatever you're working on, but I haven't tested this. It goes without saying, though, that this isn't going to handle a bunch of hammering or lots of pulling/pushing since it's suction-mounted and not bolted to your work table.If you need a vise that can be secured to any smooth surface very quickly, this is the one!
jayMac
Reviewed in the United States on March 30, 2012
I ordered this vise for our test bench at work. I loved it so much I bought another one for my home.It's just the perfect tool for what it is. It's solidly built, finely adjustable, tough yet delicate.The vacuum base works great on Formica/laminate surfaces. If you don't have a smooth surface to cup this to, get one of the other variants with a different base. If it isn't suctioned down its a tad wobbly as it becomes top heavy with work clamped into it.The nylon padded jaws work great. Hard enough to get a good grip, soft enough not to mar most things.Not too big, not too small. Don't waste your time trying to save a penny. There is a reason why this company has been making this thing, unchanged, for decades. IT IS THE BEST. I use mine nearly everyday and it works as good now as the day I bought it. If something happened to mine, I would order the exact same thing the same day to replace it.I've used mine for small repairs, electronics, soldering, woodworking, RC Cars/Planes/Boats, static display models, rotating paint stand for airbrushing stuff. ENDLESS USES!You won't regret purchasing it.I also have the self centering wide mouth jaws... A major PLUS to have in your arsenal. I picked up the electronics board holder... I don't use it much but it works well if you have a loose board your working on.
Ham Radio Operator
Reviewed in the United States on April 4, 2012
I bought this vise for Ham Radio Hobby use. I use it to hold cables and connectors for soldering. It worked perfectly for what I needed it for. The vise is well built, solid, and worked flawlessly. The head with the jaws will tilt and rotate so you can get an ideal position for whatever it is you want to be held in place. The vacuum base works great as well, although I don't always need to use that feature because the vise is heavy enough to stay put without the vacuum. I think it is a great product and I would say buy one without hesitation.
Recommended Products
$27.13
$ 12 .99 $12.99