Shopping Cart

Your cart is empty.

Your cart is empty.

PBD 4 Way Amplified Splitter Clears Up Pixelated Low-Strength Channels Distributes Signal to Multiple TVs Antenna Signal Booster

Free shipping on orders over $29.99

$29.98

$ 13 .99 $13.99

In Stock

About this item

  • 4 WAY SPLITTER – Works with all brands of TVs and passive antennas to distribute one audio / video source up to four devices with F-type coaxial connectors. This will require coaxial cable (not included).
  • SIGNAL BOOSTER – PBD amplifier will enhance and strengthen the signal received by your indoor / outdoor TV antenna. Amplifiers will clear up any low-strength fuzzy or pixelated channels – in some cases the number of channels you receive may change depending on your distance from the local broadcast towers.
  • EASY INSTALLATION – Simple to set up and comes with an AC power insert and installation instructions.
  • NOTE: Using an amplifier does not guarantee you will pick up more TV channels even though your signal is amplified; dependencies include location of TV towers, building materials, and the actual antenna being used.



Product Description

PBD 4 Way Amplified Splitter

Connect one TV antenna to 4 TVs while boosting signal in each location for clear, consistent picture quality and reception.

IMPORTANT NOTE – Using an amplifier does not mean that you will receive more TV channels but it will strengthen the signal of available channels in your area. The number of channels and the reception quality you receive will vary based on distance from broadcast towers antenna position and obstacles including hills buildings and trees

Connect to amplifier INPUT (Compatible with all brands of antennas)

Connect to amplifier INPUT (Compatible with all brands of antennas)

NOT SUITABLE FOR OUTDOOR USE

Inputs: 2

Outputs: 4

Gain(dB): 8

Frequency Range(MHz): 47-860

Noise(dB): 3

Power Supply: 5V DC

Connect PBD antenna #DA-210 to amplifier INPUT 5V POWER

Connect PBD antenna #DA-210 to amplifier INPUT 5V POWER

Connect PBD antenna #WA-2900-3D to amplifier INPUT 5V POWER

Connect-PBD-antenna-#WA-2900-3D-to-amplifier-INPUT-5V-POWER

Connect antenna#WA-2900-4G to amplifier INPUT 5V POWER

Connect antenna#WA-2900-4G to amplifier INPUT 5V POWER

Connect-#CX-208 to amplifier INPUT 5V POWER

Connect-#-CX-208-to-amplifier-INPUT-5V-POWER

Beetle
Reviewed in the United States on February 19, 2025
Four-way amplifier that could not get hooked up or work right in our opinion
ghostwithin
Reviewed in the United States on September 12, 2024
Really can't see it adds much
Lazlo
Reviewed in the United States on August 12, 2024
Good communication, fast shipping, product as described AAA+++++
Paul G
Reviewed in the United States on July 1, 2024
I tried to save some money and get a cheap amplifier. The universe taught me a lesson. It didn't work and actually made the signal worse. The pixelated stations didn't come in at all and the previously good stations were now pixelating.Immediately returned it and got a channel master amplifier. That amplifier worked perfectly. It costs more but there is a reason - it works.
Anita Malchiodi Albedi
Reviewed in the United States on February 12, 2024
I was able to replace the old Radio Shack devices with this, reducing the clutter of lines. And I was extremely pleased with how many channels came in that didn't come in before. Now, I can watch PBS again and so many other channels that I've not seen in years. I was worried that our antenna was positioned wrong but it isn't. Even a woman like me, could do this reconfiguration and installation.BTW: Three of our four TVs are hooked up to this device; they all get more channels but the TV that's physically furthest away from the device doesn't get quite as many more channels. Still, I'm completely satisfied with the results. Also, though the manufacturer says it should only be used indoors, I have the device located in a covered outdoor spa area close to where the antenna input cable. I prevent any raindrops being blown in on the device, I improved a protective cover using the original manufacturer's box. If after some years it goes defunct, I'll buy another one as it's priced just right.
PhotoBubba
Reviewed in the United States on March 22, 2023
This splitter has two inputs, one for an antenna that you can use if the antenna is not amplified, and another for an antenna that is amplified, and in that case the splitter feeds 5 volts to the antenna to power the amplifier. I am about 50 miles from a big metropolitan area, and I just use a small amplified antenna in a window facing toward all the transmitters. Then you just connect up to four TV receivers or HDHomeRun tuners to the outputs and it feeds them all with the same signal. It works well for me. Recommended!
Sam p.
Reviewed in the United States on November 28, 2023
Didnt work
Customer
Reviewed in the United States on December 14, 2020
I have a PBD Digital HD Yogi Antenna with a PBD HDTV Preamplifier installed on my house. This setup works very well for bringing in weak stations with one exception, if you connect more than 2 TV's I would lose some of the stations or have pixilation. I have 3 TVs and needed something that would provide a strong and steady signal to all of them at the same time.Purchased the PBD CX-4FA and installed it as instructed and hooked up all 3 TVs (you can hookup 4) and tried them all at the same time and had NO pixilation or lose of signal. The setting up took me about 10 minutes. I am VERY PLEASED with the performance of the HD Smart Boost Antenna Amplifier. It does what it says it does and without any hassle.I have had several contacts with PBD customer service and they have always gotten back with me within 24 hours. This Company and Service personal are truly dedicated to solving customer problems and furnishing them with a quality solution to TV reception. They want you to be happy with them and your TV viewing.I would not hesitate in buying their products. Thanks PBD for your help and for having a quality solution to OTA TV reception.
Recommended Products