Your cart is empty.
Your cart is empty.Product Description
【High quality material】 Sturdy and durable
Compatible with Ring Video Doorbell (28VR1S7-0EU0)(Asin No.B072QLXK2T) .The angle of rotation is -60 degrees to +60 degrees left side to right side,with a total of side 120 degrees of adjustment,fully and clearly see the visitors.
Made of High quality Metal materials.
Total 120 degree large Scope expansion.
All the screws are made of the best quality stainless steel.
Perfect humanized Design for Nest Hello Doorbell, facilitate your life
Adjustable with Angle Scale from left 60 degree to right 60 degree
POPMAS ADJUSTABLE Angle Mount allows you to adjust the angle from left 60 degree to right 60 degree.,Total 120 degree,so it make your adjustment more easier and much time saved.It is perfect to improve your motion detection and have a good view of visitors
Improve your motion detection
POPMAS ADJUSTABLE Angle Mount allows you to adjust the angle from left 60 degree to right 60 degree. Make your adjustment more easier and much time saved.It is perfect to improve your motion detection and have a good view of visitors.
Perfect humanized Design for Nest Hello Doorbell
The humanized design (left 60 degree to right 60 degree) is for different needs, no matter whether the direction of the door of the house is right or left. The angle mount design allows you install it any orientations you want. It make the view simple and convenience .
Easy Install and Perfect match
Firstly fix the bracket on the wall; Secondly tighten it with a screwdriver and a wrench; Thirdly fix the angle; Finally lock the door bell with a screw .
With & Without the angle mount view scope display
With our angle mount ,it's much better view and vision with the adjustment, especially when you use the angle mount in order to see down and get an excellent view of the walkway, the front yard and all the way out to the road.
Redavid
Reviewed in the United States on September 19, 2024
This door bell camera hold works great and looks good too
Lance C.
Reviewed in the United States on November 24, 2024
It does the job well and holds tightly. However, for a front door, it leaves too much hardware exposed behind the doorbell. It needs to try to make some kind of cover.
John
Reviewed in Canada on August 13, 2022
Mounting went well and it provides a good view of the approach that is 90 degrees to the front door. The rubber boot covering the wires didn’t fit well and I had to use silicon to get it to seal. For the price of this mount, I would have expected better.
Biao
Reviewed in Canada on November 4, 2022
good
One4
Reviewed in the United States on July 25, 2021
Used this to install an ADC-VDB770 doorbell camera from Alarm.com. The threaded holes in the doorbell mount-plate align perfectly with the ADC-VDB770 mounting holes. I did, however, need to purchase some metric, M4-.70 machine screws, as the screws that come with the bracket, meant for the Nest Hello, are not long enough. Be aware that the threads of the holes are metric and not U.S. Otherwise, I had an old, broken bamboo cutting board that I cut down to close to standard electrical wall-plate size to cover the old screw and wire holes in my brick wall. I then mounted this bracket to that piece of cutting board instead of directly to the wall. Works perfectly for me, and looks great too!Update: After a few days, we decided to replace the smaller, cut-down piece of broken cutting board with the larger piece. I did not cut this larger piece, but just sanded and sealed it. Too, we wanted to place a sign next to the ADC-VDB770. Pictures are of the completed installation.
Mr. JDT
Reviewed in Canada on July 13, 2021
High quality bracket overcame my problem of a narrow door jam which limited my Nest doorbell to face across the front door. With this bracket, Nest door bell faces outwards for full coverage. Solid construction, includes a small wrench and Allen key to lock into position. The provided black plug (to cover the wires) didnt work for me as I have the bracket at a full 90 degrees, so used black Gorilla tape to cover the wires and the baseplate when screwed to the door jam, Definitely recommend this product.
Mathew Marr
Reviewed in Canada on March 15, 2021
I had an obstruction where my original doorbell was. Instead of rewiring a new one to the other side of the door, this came in clutch saving me time and money!It comes with a rubber guard for wires which is great.
Darren
Reviewed in the United States on January 19, 2020
First of all, many thanks to the first review that suggested adapting two of these to accommodate tight fits. Genius idea!We have an extremely tight space and I'd looked everywhere for something that would allow for a sturdy mount while also looking clean and professional. Two of these and some tinkering is the best solution I was able to find.Connect the two skinny plates. The gasket will still fit. If you put the connection at the bottom then the bell will feel rock solid when people push it, but there will be a bit of the plate visible above the device. If you flip it then the plate won't be visible, but there will be a tiny give when someone pushes the button. Personal choice - I went with a cleaner look after trying out both ways.As you can see, these plates will provide about an inch of separation from the wall when using both front pieces.The skinny plates aren't made for mounting screws so you'll need to expand them a little. I used a 9/64 drill bit and wiggled it around a bit to enlarge. Worked perfectly for the mounting screws that come with the nest (they seemed a bit better than the ones that came with the bracket).Nothing else to it. Mounted great, very happy with how solid it feels and how clean it looks.
once n a while
Reviewed in the United States on April 6, 2020
My doorbell is 90 degrees from my door, i.e. it is on the wall next to the door and not on the same wall as the door.Bought a SimpliSafe doorbell camera with my system and had to accommodate this angle. This little bracket gives me ability to replace the doorbell as instructed but turn the camera 45-60 degrees to face the entrance.Works great.The mount is a little protruding but that’s not the mount’s fault - I have a stucco exterior and can’t exactly blend it in. I’m very happy with the out come and the doorbell/camera works perfect with the flexible mount.I did have to drill one hole to accommodate the slightly different attachment points in the back. This mount is made for NEST camera which is similar but not exactly the same. One small drop hole and it worked great though.
lodeal
Reviewed in the United States on December 31, 2019
One of the things my mother wanted when moving to her new home was a video doorbell, and I was happy to help install it for her. The one catch was that the doorbell by the front door was on a wall perpendicular to the front door, so the standard installation equipment was not going to provide an angle sufficient to make the video very effective.This adjustable mount works PERFECTLY for this type of installation. It attaches to the wall just as easily as the standard included equipment and provides a very clean and efficient mount for this video doorbell. The attached pictures illustrate how well the doorbell looks from the outside and how well the camera sees the entire entry space. HIGHLY RECOMMEND!
Bruce Willee
Reviewed in Canada on December 30, 2019
Yes, it wasn't cheap but... am I glad I ordered it because my NEST video doorbell would not have installed nicely without it! It has everything you'll need, I used longer BLACK coloured screws because they only ship steel (silver coloured) screws that look awful on the black bracket. The bracket is very well made - strong and sturdy. I was able to mount the camera with a perfect view thanks to this bracket. I would give it 5 stars in all categories if not for the high price.
J. Scheele
Reviewed in the United States on October 14, 2019
Frankly, I was expecting a cheap flimsy gimmick, especially at this cost, (formed plastic is much cheaper to make at the same price point but with more limitation).And when I open the package and looked t the cheap little box that it came in there was an indicator of my suspicionBut I was very pleasantly surprised to find high-quality, well thought through components! Really sturdy and dynamic.Three stars on ease of install, because My install was behind some three-quarter inch molding, and hardy board, and 2 inches from the corner. So very difficult to get to. But after thinking it through and a little bit of cussing, Gotter dialed in. The nut drove me nuts!But again, in the world of cheap garbage we live in, it’s nice to know somebody cares about crafting a well engineered little piece of Solution!
MB
Reviewed in the United States on April 27, 2019
POPMAS Nest Hello Adjustable Angle Mount from Ideals. Out of the box this is a sub-par item because the portion that attaches to the wall does not match the normal 2 hole design of American generic doorbells. However, the portion that attaches to Nest Hello is setup for generic American doorbells. After receiving 1, I decided to order a second one and switch the 4 hole plate with the 2 hole plate. I did not have to drill extra holes or fill old holes, making it a 5 star setup for me, but I did have to buy the item twice to get the correct plates :(
Recommended Products