Your cart is empty.
Your cart is empty.Progress Profiles - ProLeveling System - Linear Levelers (PRSL) are designed to fit where two surfaces adjoin to create a level surface and even spacing. The Progress Profiles ProLeveling System is a revolutionary and innovative tile leveling system that is ideal for laying medium and large materials with a thickness of between 2 and 40 mm. This patented system consists of three elements: a leveling base (of 1, 2, 3, or 5 mm) with spaced notches for spacing/separating/joining floors in all kinds of material. a threaded stem central to and perpendicular to the base, with various easy snap-off points. a pommel cap (sold separately) that tightens down on the stem and base creating a level surface. The threaded stem is attached perpendicularly to the leveler base in a way that allows for easy adjustment with turns of the pommel cap during installation. Removal of the cap and Stem after the materials are set is made easy with strategically placed breakage points that release with either increased pressure by turning the cap or by kicking the cap in the direction of the joint. One cap fits all threaded stems and can be reused an infinite amount of times for big cost savings. The new patented Progress Profiles ProLeveling System - PPLS assists in the reduction or elimination of ledging and lippage in the installation of various types of materials that are applied to floors or walls with mortar including: Large Format Tile, Natural Stone, Thin Profile Tile and many others.
william mongillo
Reviewed in the United States on May 29, 2024
High quality. Easy to use. Great value
Why go anywhere else!
Reviewed in the United States on May 24, 2023
Well thought out. Easy to use. Did entire master bath with 12" x 24" porcelain tile. Would have been hard to do without them. I am not a pro but have flooring experience. Not a job for the average DIY install.
CB
Reviewed in the United States on December 23, 2023
Was laying a large floor with 16" ceramic tiles. Was finding it difficult to lay them without "Lippage" occurring between the tiles. Bought these along with the mating nuts and it made the job so much easier. Like that they have straights, tees and cross configurations on these. Wouldn't lay another floor without them.
Meredith
Reviewed in the United States on October 25, 2022
This makes installing large tiles pretty easy!! We used 15x30 porcelain tiles with 1/8” joints and it came out nearly perfect. I’m a weekend warrior and this was the first time I’ve installed tile larger than 12x12. I will not attempt this in the future without these spacers!
the traveller
Reviewed in the United States on April 2, 2019
Joe Letendre of tile university put me on to the Progress Profiles Proleveling System. I wouldn't tile without these little gems. They save a huge amount of time and effort in trying to level tile to prevent tile lippage. Only bummer is I have to order from the United states as this product for some reason is unavailable in Canada.
Bryan
Reviewed in the United States on February 18, 2018
Nice smooth floor.....only thing I don't like is spacers are in Pack of 100 and caps are only 50 pack..Makes it tough to continue working with no caps...also a bit pricey for caps
BkBaths DotCom
Reviewed in the United States on September 7, 2015
Works very well, But need to watch for tiles to move out of place when tighten down. I have done over 5 bath room so far with this system. Work well to help even out the defection in tiles. For heavy deflection tiles, Like 12x24 you will need 6 to 8 per tile to get the tiles flat. Warning it you tighten them to quickly they will break off, tighten them slowly over time, Like every 20 sec. Most break them off with a rubber mallet very well,Need to strike them with the grout line. Some do not break off all the way and will need to cut out with a razor knife. You will need extra Blue tighteners as 100 may not be enough to do the job. Also Extra Profiles will be needed for inline and corners as needed. Last note is you must use a 1/2'' thin set trowel for large format tiles. This will also help the pro leveling to work easier.
Grace
Reviewed in the United States on May 31, 2015
The thought is awesome but they do not work. After everything dries you have cut cut these out. No way if you use morter for them to break off. Finally just broke off prior and used as a spacer. Spent 200$ and basically just threw that money away. The prior review is not from a true customer. Sales pitch.
Recommended Products
