Your cart is empty.
Your cart is empty.Product Description
Feature:
- SINGLE BUTTON MODE -- The three buttons have the same function, one same button on the remote control to circularly control the main engine OPEN/STOP/CLOSE/STOP.
- EASY TO OPERATE AND PLACE -- The remote control is equipped with a bracket at the back for easy mounting in the car.
- COMPATIBILITY--Our remote control is compatible with the gate opener of GATEXPERT,G.T.MASTER, and we can't promise it can also match other gate opener.
Package includes:
- 1*Remote Control(with battery)
Specification:
- Model: RC3B17
- Working frequency:433.92MHZ
- Battery: Alkaline battery (12V/23A)
Note:
- One remote control can control four gate openers, but the control boards should be same.
- This remote control is designed for matching our store control board, so we can't promise it also can control other control boards, please ask us before purchasing.
- The remote contol has three buttons, if button 1 is damaged or insensitive, you can delete the remote controls first, then use button 2, button to relearn and control the gate opener.
HOW TO PROGRAM?
PY600ACN control board
1.Press the learning button AN1 on the control board, and the indicator light LED2 will be on;
2.Press the same button on the remote control twice, the LED2 light flashes repeatedly and then turns off, the remote control learning is finished.
Delete the remote control:
Press the learning button AN1 two sec. and the LED light will be on; then hold the button until the light turns off. This indicates that all remote controls that have finished learning previously have been deleted.
IDE200 control board
Add extra remote controls:
1.Press the button TS3, and the display screen shows C1;
2.Press the button you want to program, and learning is finished until digital is shown. (The default remote control mode is Step by Step)
Delete the remote control:
Press and hold the button TS3 until it shows OK, which indicates that all the remotes have been deleted.
PY300DC control board
Add extra remote control:
1. Press CODE, a dot is indicated on the LED display.
2. Press the transmitter button which you want to use, then press the same button again after one second.
3. The dot on the LED display will flash then turn off.
4. “||” is indicated on the LED display, then the learning process is finished. At most 20 remote controls can be learned.
Delete remote control:
Press and hold CODE until “C” is indicated on the LED display. This indicates that all remote controls that learned previously have been deleted.
Sheg
Reviewed in Mexico on March 4, 2025
No compatible con lo que pedi
Raul Dominguez
Reviewed in Mexico on February 2, 2025
Excellent
Lilian M.
Reviewed in the United States on July 2, 2024
No issues, works great on my gate.
AMR
Reviewed in the United States on November 21, 2024
Funciona muy bien
Patrick Altmaeir
Reviewed in the United States on February 14, 2023
Fits in the car's visor perfectly and does it's job. Opens and closes the gate.
Desert Dave
Reviewed in the United States on December 22, 2023
The remote that came with the opener works reliably from over 100' away. We bought 4 of these to put in the vehicles and are lucky to get 30'. Not kidding.
Aldrick Adorno
Reviewed in the United States on September 29, 2022
Very easy to set up and has been super reliable. Ended up buying 4 in total to replace my old beat up remotes.
Francisco Javier Leal Rodriguez
Reviewed in Mexico on December 5, 2022
Excelente dispositivo funciona a una distancia de 50.mts sin problema..Lo recomiendo ampliamente...De hecho he comprado 4.....por este precio sin problema....!
Customer
Reviewed in the United States on August 8, 2021
The media could not be loaded.
robert elizondo
Reviewed in the United States on March 8, 2021
This is a better Alternative than a wired push button switch, easy to program. So with this Remote and a water proof outdoor outlet cover, you can put it anywhere you like.Use double side tape and dont put the visor clip on. It fits perfect in the slim cover. Pics show the part num of the cover which I bought here on Amazon.
E. Clement
Reviewed in the United States on October 30, 2019
Be aware. This remote programs a little differently than the one that comes with the opener, even though it is the same brand. You have to push the program button on the circuit board. The LED will light up. Wait for it to go out. Then, push the largest button 2 or 3 times. The led should blink several times and then go out again. This is a little different than how the poorly written instruction manual describes how to add a controller. Very frustrating. Once you have it programmed, it works great. These controllers have a fabulous distance range.
Recommended Products