Your cart is empty.
Your cart is empty.These pivoting risers offer a 2" center to center rise to accommodate more applications with out replacing your stock cables. Always check and confirm that your bike has adequate cable and brake line length before installing any handlebar risers. Black Anodized Finis NOTE: Longer cables may be required when installing handlebar risers on some models. Please verify your cable length prior to placing your order
Stephanie F.
Reviewed in the United States on July 23, 2024
Works excellent right hight and fit and quality built
ron
Reviewed in the United States on June 6, 2024
Riser is easy install. You will possible need to cut some cable ties to get more cable length. Riser helps rider get a little more upright position with arms in relaxed position. Would recommend to anyone have low back, shoulder or wrist issues.
Customer
Reviewed in the United States on June 4, 2024
Put these on a 05 r1200gs. Figment was perfect. You had to hold your mouth just right and it took a few tries to get the bars where I wanted them but the end result changed the whole feel of my bike. Don’t waste your money on the cheap knock offs. These are heavy duty and adjustable to get your bars right where you want them.
Jonathan Smith
Reviewed in the United States on June 14, 2024
There were no installation instructionsIf you will have your handlebars further forward, then you will want to Tighten the front all the way down as the bars will be covering the BoltsIf you’re going to have the bars further back, then you will want to tighten the back first move everything backwards to the desired position, then tighten the frontOtherwise, great product made a world of difference for me in terms of comfort and seating position. My back is no longer getting tight after being on the bike for over an hour.
Frank
Reviewed in the United States on April 27, 2024
These made all the difference in the world for me. Bike is much more comfortable now for my above average height. Make sure you have enough excess cable length to reach the extended bars before ordering. I had to reroute a couple of mine and works great. Next purchase, lowered footpegs.
Tamara
Reviewed in the United States on August 15, 2022
Work well on my yz250. The Allen bolts used to secure the risers to the triple clamp are impossible to access when securing your bars on the risers. I switched the Allen bolts with hex bolts and the install was a breeze.
Pronto
Reviewed in the United States on July 8, 2022
Well-made and fit as expected. To minimize scratch risk to the bike, 4 hands are better than 2 and also have a towel laid on the tank to be safe. It does take some fiddling to get the lower bolts tightened, but it is doable. The cables on my 2020 KTM Super Duke Gt were fine with the 2" rise, with the brake line from the master cylinder being the item with the least slack. Be sure to check full lock in both directions.It came with nice bolts, though I think they are just zinc plated steel and not SSTL, so we'll see how they hold up over time after riding on rain.
Customer
Reviewed in Canada on October 15, 2021
These worked out great for me because I pushed my bars forward. If your just looking to raise your bars and keep it in line with the forks it’s next to impossible on my bike (gas gas ec250) to get a tool in there to tighten them
Stephen
Reviewed in Canada on October 22, 2020
Atv
Customer
Reviewed in Canada on October 20, 2020
Better than standard risers as you can pivot them to move the bars for ward and backward as well.
Michael
Reviewed in Canada on June 10, 2019
Fantastic! Ordered and shoppee the same day. Got it the next. Installed on triumph tiger 800 2016. Tricky to fasten bolts but got there eventually. Great seller
ScranScran
Reviewed in the United States on April 24, 2018
Great product! Don’t get me wrong with the 4 star rating. Have these attached to my fat bar adapter, and love them. Nice and sturdy, don’t bend, don’t tilt, they just work.My only reason for 4 stars is that a buddy of mine saw mine, of course wanted some, so he went on EBay and found some for $25. I thought ROX had the market cornered, so I spent the $, but after comparing his to mine, they’re the exact same. I know his are a Chinese made knock off, but it is just a machined piece of aluminum. Kind of hard to justify the extra money for something that really wouldn’t be that hard to make if you had the time and patience.Overall, they are a great thing to have. I’m about 6’3, and this is the only way I can get even close to standing comfortably on long desert rides on my DRZ. I know there’s arguments for and against risers, but I can say personally that it makes the difference between only riding half a day, and being able to ride a whole weekend.
Shineeks
Reviewed in Canada on June 20, 2017
Quick delivery and made a huge difference in the comfort of my riding!
Recommended Products
