Your cart is empty.
Your cart is empty.Product Description
- RL-HM012 is a LCD digital hours tachometer contains functions of hours tracking,RPM monitoring.
- It made by 100% epoxy resin with strong water resistance which can keep good working condition upon underwater 10 meters up to rate IP68.
- Include built-in CR2430 battery with durable battery lifetime.
Runleader RL-HM012 Digital Mini LCD Hour Meter Tachometer,Gas Engine Inductive Pickup,Waterproof Design.
1. Product Features
- Real-time RPM: Display real-time engine RPM value when it running.
- TOT Hours: Display total running hours when it off.
- TOT Hours range: 0 to 99,999 hours.
- RPM range: 0 to 30,600 RPM.
2. Main points
- Inductive engine signal pickup.
- Strong water resistance.
Runleader has established a complete laboratory for testing and improving the product's quality
Yellowing Resistance Testing
It can keep good working condition from simulative strong UV ray lightening.
High Pressure Washer Testing
Display with PC transparent board can keep it away from the damp or moist.
It also prevent the strong shock when it is cleaning.
High & Low temperature Testing
It can works well in temperature environments temperature: -40 °C - +70 °C.
Drop Testing
Favorable anti-vibration performance can suffer strong vibrations when the equipments is working.
Anti-vibration Testing
It can keep the housing and LCD display window in good condition upon vibration amplitude 1.52mm after 6 hours testing period.
Anti-interference Testing
It keep good working condition upon static interference test. It also pass another considerate test for each functions sections and attached accessories.
Installation Methods
Luis Cuevas
Reviewed in the United States on February 18, 2025
Excelente Calibrador de Revoluciones en el Trimmers
Cliente
Reviewed in Spain on September 7, 2024
Todo correcto,muy rapida la entrega,producto excelente
Photo 208
Reviewed in the United States on September 17, 2024
No need to hook up wires, works on induction
Tim
Reviewed in Canada on June 4, 2024
Was an easy straight forward install. Works well and looks good.
aforetaste
Reviewed in the United States on June 25, 2024
I had this mounted on my chainsaw. My first tach (same one) was able to pickup the rpm just by holding it near the saw. I lost the first one and the replacement isnt quite as sensitive. Other than that they work well and are really usefull for tuning. My only disappointment is they are creating more land waist by not making the batteries replaceable.
Joelk
Reviewed in the United States on October 27, 2024
Works well
Bart K.
Reviewed in the United States on January 27, 2024
Super easy to install and works perfectly without any issues.Good price and fast shipping.I'll be installing them on all the mowers I have.
Gaby
Reviewed in France on May 1, 2023
Branché en doublette avec un autre tachymètre sur l'allumage d'une tronçonneuse accélérée à fond, ce tachymètre donne un nombre de tours de 7880 à 8000 tours alors que le second indique plus de 13000, ce qui correspond aux données constructeur.Gadget à éviter d'acheter.
nickigo
Reviewed in Germany on November 30, 2023
super ding
Jack
Reviewed in the United States on January 15, 2023
I was a bit sceptical about buying this Tach / Hour meter, but after the first time I used it to set up the new carburetor on my chainsaw, I was completely impressed with the ease and accuracy of the tachometer. Just lay it next to the spark plug and it instantly picks up the induction from the plug wire and reads out the RPM's. There was no need to connect the included wire for any of the lawn equipment I tried this on. This is easily one of the best little "tools" in my box, and for the price, if / when the battery dies, I will definetely buy another.
Robert
Reviewed in Germany on April 26, 2023
The media could not be loaded.
Kerry J
Reviewed in the United States on August 31, 2022
Just hold it close to the spark plug and it reads RPM. Also can be mounted on the unit to teach run time hours . So inexpensive I bought two !Factory settings and carbs with limiter caps do not work up here at 4,000’ . Set the mixture with max RPM at idle and see it back down as you turn the screw , set it down 500 . Then crank it up toMax speed . Look up your unit’s spec and set Torre limit . Now starts well & runs great !!!
David R. Smith
Reviewed in the United States on June 10, 2022
I own two Honda walk-behind mowers, one from year 1998, another from 2008. Both still work and run fine but I suspected that their engine running speed was a little low. I used this mini-tachometer as a stand-alone, hand-held instrument. Started mower, warmed up for 5 minutes, had wife keep mower running while I carefully walked in front of one of the wheels (blade spinning) and with Tachometer in my hand, reached over near the spark plug wire and observed the running RPM (2890). Stopped mower, adjusted (bent) the aluminum governor control a tiny amount (with pliers), restarted mower, remeasured speed (2970). Again stopped mower, slightly adjusted the governor mechanism, restarted (3090). The ideal speed is 3100 RPM, so I was finished. Mower cut better now, much smoother, finished look. Repeated the entire process with my 2nd mower, adjusting from 2840 to 3110 RPM. All good. I have noticed that the mowers' gas "mileage" is somewhat poorer with the slight increase in motor speed - but the cut quality is obviously better for sure (blades sharp).
Recommended Products
$137.48
$ 59 .99 $59.99
$99.89
$ 48 .99 $48.99