Your cart is empty.
Your cart is empty. Now our shop has four versions of XLR RJ45, XLR 3-pin male or female, XLR 5-pin male or female. Different adapters can be mixed to make, for example, a 3-pin to 5-pin cable. The XLR 5 Pin RJ45 is ideal for quickly manufacturing DMX512 cables at very low cost and is free to connect to 1-300M cables.
Features:
-It is an adapter to convert a XLR connector to a RJ45 connector for your LED Light signal controller.
-The XLR 5 Pin to RJ45 Female adapter cable is plug-and play, convenient to install.
-This XLR splitter cable is made of 99.99% high purity oxygen-free copper(OFC), high transmission rate, the signal loss is small.
-Cable Body Outside Diameter : 6.0mm
-Connector 1: RJ45 Female plug
-Connector 2: XLR 5Pin Female&XLR 5Pin Male plug
Note: It is used to control DMX 512 series signal data, LED controller, not XLR cable for transmitting audio
Warranty:1 year
Dave Feldman
Reviewed in the United States on May 7, 2024
does not work as a DMX converter.
Customer
Reviewed in Canada on November 9, 2024
Adapter from 5pin dmx to rj45 (ethernet) failed to passthru the dmx signal from LED stage lighting fixtures.Switched and tested on multiple fixtures. Adapters were traced to the fault.
S. Michael meacham
Reviewed in Canada on November 27, 2023
Exactly what everyone else is saying. These do not have standard DMX wiring and did not work.
Mark Hardcastle
Reviewed in the United States on November 10, 2023
We bought 18 of these for some dance floor lighting and out of the box they do not work.
Matt Dawber
Reviewed in Canada on October 21, 2022
They do work. . . if you are using on low-end gear that doesn't require RJ45. (In other words, you are using the CAT5 or 6 to run over a long distance and use BOTH of the adaptors on each end of the CAT5. . .it will work.They aren't wired correctly (wrong pinout) for any kind of fixture that might require RJ45 though. In other words, if you have DMX 5 pin off your console or on the wall and a fixture requiring RJ45, these adaptors won't do that.Not sure why anyone would make these or what anyone would use them for? They aren't really dmx adaptors.
Michael Vu
Reviewed in the United States on October 11, 2022
These adapters do not work to transmit DMX over Ethernet. Upon further inspect of the actual cable, they are actually labeled as "MIDI Cable". So this is FALSE ADVERTISING to say that these transmit DMX signal when they do not.
a50harrison
Reviewed in the United States on September 5, 2021
Product worked as expected. Very well made and quick shipping on the item.
Brett Gardner
Reviewed in the United States on July 25, 2020
I'm a pro user, and this adapter set is just right for my controls kit.
Eric Searcy
Reviewed in the United States on March 10, 2020
Worked great! I used this with bulk CAT5e that I crimped ends on, to run a couple of lights from an ENTTEC ODE Mk2.
Dave Janssen
Reviewed in Canada on December 23, 2020
Works perfectly. Running roughly 200’ and converting to 3 pin at one end.
Alex Holod
Reviewed in the United States on October 29, 2020
Solid connections. Well made does what they need to. No complaints!
Chris
Reviewed in the United States on October 28, 2020
So far these have been great.For runs under the carpet in an exhibit booth, or I always make sure I have a variety of different ones to make adapters on the fly.
Recommended Products
$169.99
$ 72 .99 $72.99
$29.95
$ 12 .99 $12.99