Your cart is empty.
Your cart is empty.Wefuit double-sided holographic 3D printer build plate innovatively combines dreamy kaleidoscope and futuristic Skynet patterns, adding infinite creativity and visual feast to your printed works. Whether it is the gradient of layers under soft light or the colorful colors at different angles, it can create a romantic and festive atmosphere. It supports multiple filaments such as PLA, PETG, ABS, TPU,etc,with a maximum temperature resistance of 200 ° C, easily meeting various printing needs. The specially designed strong adhesive coating ensures stable first layer printing, making it easy for even beginners to get started. High strength spring steel plates are not only durable and heat-resistant, but can also be easily bent and demolded without the need for additional tools, restoring flatness to its original state. compatible with K1/K1C/Ender 3 S1 Pro/Ender 3 S1/Ender 5 S1/Ender 3 V3/Ender 3 V3 SE/Ender 3 V3 KE,with a size of 235x235mm, to meet your diverse printing needs. Choose Wefuit and embark on your creative printing journey!
Agent Squirrel
Reviewed in the United States on February 11, 2025
This plate works well on my S1. It adds a very cool effect to prints.It excels at holding my PETG filaments to the bed. I was having a bunch of issues no matter which PETG I used. The adhesion with this plate solved those issues.It is easy to clean with dish soap and water. I do wish they had included that information because I wasn’t sure if I would ruin the plate the first time I had to clean it.
E. Lofgren
Reviewed in the United States on December 8, 2024
I used this plate because I was having trouble fighting to get ABS and PETG prints off of my PEI sheets on top of a glass build plate. Going to steel was a great move, and this one worked just fine. I could take or leave the cool patterns that the plate leaves on the bottom of the print, but there was no arguing with how easy it was to bend the prints free once cooled.You'll want to spend the time to get it perfectly level and dial in the nozzle distance. It behaves a bit "slicker" than my previous setup which would adhere if you got the filament and the plate in the same room with each other, but the bottom finish and the ease of detachment make this one a definitive upgrade.
D. Ash
Reviewed in the United States on December 6, 2024
Using these build plates on my 3d printers produces a nice effect on flat surfaces that touch directly on the build plate - like the bottom of the tea light stars pictured. The only down side is that prints don't come off easily, I had to use my scraper. With most build plates a thin layer of glue (purple stick glue) and prints come off easier but then the effect does not show on the print as well as without glue. I gave them 4 stars as it is still pretty cool.
𝔪𝔞𝔫𝔠𝔢𝔭𝔰
Reviewed in the United States on November 3, 2024
It really works!I've got an upcoming project where I was thinking of making the lids "fancy" with a textured design when I saw this psuedo holographic print bed and I honestly doubted it would be able to replicate that in the print.There were no instructions or anything included but as a matter of habit I wash all my bed plates in hot (dawn) soapy water and normally give them a good scrubbing with a nylon however I was worried of damaging the finish so I only lightly scrubbed them. Then I dried with a microfiber towel and finished it by wiping it down with isopropyl and then letting it air dry.Seeing as how I doubted it's ability I tried it out on a smaller job on one of my trays I was printing and WOW it really worked! Bed adhesion was great and it released with a little effort after everything cooled. Honestly the only criticism I have is the alignment cutouts seem to be too far apart and rather than resting perfectly "centered" I have to verify its lined up before it rests down on the magnetic plate (so it's not quite indexed properly for my printer).If you want fancy textures for your 3d prints this is a great one to get.
Joe
Reviewed in the United States on November 26, 2024
This is like any other textured/patterned build plate, you want to be careful with the holo side to not crush the microstructures but it makes for a pretty fun, pretty bright effect on the bottom of your models, It's also quite a bit smoother than the standard PEI so if you're wanting that injection molded feel this can help... at least on the one side haha
LF
Reviewed in the United States on November 10, 2024
The JUUPINE Upgraded Wave Line+Carbon Fiber PET Build Plate is a fantastic upgrade for the Creality Ender 3 V3 SE. This build plate offers exceptional adhesion and durability, making it a reliable choice for consistent and high-quality prints. The combination of Wave Line and Carbon Fiber PET ensures that prints stick well during the process and release easily once completed.Cleaning this build plate is a breeze, thanks to its smooth surface and robust material. It significantly outperforms the original plate that came with the printer, providing a much better printing experience. It fits perfectly on the Creality Ender 3 V3 SE and is ready to go out of the package.This build plate is a worthwhile investment for anyone looking to enhance their 3D printing setup. Its superior performance and ease of maintenance make it a standout choice for achieving excellent print results.
lunchbox
Reviewed in the United States on October 27, 2024
What can I set the plate is super sticky fully worth it
Jonathan, Huntsville AL
Reviewed in the United States on October 10, 2024
Wow this thing is great with PETG, NO GLUE! Great quality, highly recommend.
Recommended Products
