Your cart is empty.
Your cart is empty. ▲ Swpeet 120Pcs 10 Sizes Mini Fuel Injection Line Style Hose Clamp Assortment Kit
WHY CHOOSE US?
✔ 1, Hose clamps are flexible and ductile with wide adjustable size range. A worm gear mechanism adjusts the clamp’s diameter to precisely apply sealing pressure.
✔ 2.They are easy to tighten and loosen and they are made of from zinc plated steel for durable long life.
✔ 3, The product is used in auto and Motorcycle. Dragging, machinery oil, water, gas, which makes the pipe joint seal more firmly!
▲ Specifications:
✿ Quantity: 100 pcs
✿ Material: Zinc Plated
✿ Clamp Range: 7-18mm
✿ Type: High Quality Fuel Injection Line Style Hose Clamps
▲ Package Included:
✿ ⑴ 7 - 9mm------------------- 15 PCS
✿ ⑵ 8 - 10mm------------------ 15 PCS
✿ ⑶ 9 - 11mm ----------------- 15 PCS
✿ ⑷ 10 - 12mm ---------------- 15 PCS
✿ ⑸ 11 - 13mm ----------------- 10 PCS
✿ ⑹ 12 - 14mm------------------ 10PCS
✿ ⑺ 13 - 15mm------------------ 10 PCS
✿ ⑻ 14 - 16mm------------------ 10 PCS
✿ ⑼ 15 - 17mm------------------ 10 PCS
✿ ⑽ 16 - 18mm------------------ 10 PCS
✿ 【Total:120 PCS】
▲ Note:
♥ 1.The actual product maybe slightly different from the picture shown due to lighting and the color setting of each individual monitor. Please allow the slight color difference.
♥ 2.All the sizes are for your reference only. 2~3 cm data error is allowed. Thank you for your understanding.
♥ 3,If you have any questions, please feel free to contact us at any time.
L
Reviewed in Australia on May 9, 2024
Damage case. Not a massive drama but unfortunately everything is mixed up and have to organise a new container for the hose clamps
georgedeane
Reviewed in Canada on March 16, 2024
no pigtails hanging out after tighting clamps ,leaving a nice clean look.
Bob
Reviewed in Canada on March 13, 2024
Wish they had less of each size, and offer more variety.But they seem to be really good quality. They will work much better than the normal hose clamp.
Edward. Hurt
Reviewed in the United States on February 19, 2024
Excellent quality clamps great selection of sizes for the value use that My shop
Customer
Reviewed in Canada on December 4, 2024
Awsome little kit always looking for small clamps this kit coves that should last me a whole price was good better than the same in worm type clamp
alm
Reviewed in the United States on December 19, 2024
Perfect for what I needed
Paul
Reviewed in the United States on October 19, 2024
Uses metric size tightener. Way too many small ones unless that's what you want. They hold up pretty well when tightened to the max
Rafael E. Mercado
Reviewed in the United States on April 30, 2024
This clamps are the correct piece to prevent harm to fuel hoses. This translate into a safer job when replacing worn hoses. Common clamps may harm the hose which could result in a failure and an unwanted leak of fuel.
matt
Reviewed in the United States on September 13, 2023
Will get the job done but if you can afford it go with stainless steel.
Truckosauris
Reviewed in the United States on June 26, 2023
Really cheap assortment and they can be tightened very tight without stripping. Had every size I needed, and is perfect for the bottom of my toolbox incase I ever get in a bind
Moe
Reviewed in Canada on March 13, 2023
Works good on fuel injection high pressure hose 👍
Christopher Alexander
Reviewed in the United States on August 23, 2022
These work okay depending on the type/material of the hose, system pressure and fluid composition. If your application is critical and/or difficult to access do not use these. If your application involves silicone hose in a cooling system application do not use these. If all you're doing is replacing some old fuel hose on the lawn mower- should be fine. In this case it ultimately comes down to the materials used to manufacture these things. It's low quality steel and marginal production practices.
Stiletto
Reviewed in the United States on August 5, 2019
This is a very nice assortment of fuel injection clamps in just about every size I will need for some time. Although they are not stainless steel (so don't use them in marine environments or in the rust belt where the roads are heavily salted) they are zinc plated and should stand up to general use.My plastic box arrived with a broken hinge, which I believe is due to the vendor using too small a box and trying to stuff 120 clamps in any way they could. This is clear from the vendor placing some clamps into areas where they should not be, simply because if they were all organized properly, the box will not close. After receiving my purchase, I had to resort the clamps because they were slightly mixed up. I would strongly suggest to the vendor that they re-think how the partitions are installed inside the box to give the 10-12mm clamps more room. Or just use a slightly larger box. This will allow them to place all clamps properly sorted in the areas where they should be, and avoid the box from being damaged so easily in shipping.In spite of the plastic box issues (which does not affect the quality of the clamps), I would buy these clamps again. I had no issues tightening them down to 13 inch lbs, with no failures. They are an excellent value in decently made zinc-plated FI clamps and I would recommend them for applications where the use of stainless steel clamps is not mandatory.
Recommended Products
