Your cart is empty.
Your cart is empty. Description:
Size: 5.5" * 1" * 0.6"
Salt Range: 0-9990ppm or 0.000-0.999%
If the meter reads 500 x 10 ppm that means 500 x 10 = 5000 ppm = 0.5%
Press hold button to keep current reading on display, allowing the meter to be removed from the water and read
Temperature Range: 1-50 °C (Does NOT display in F)
ONLY will work for Salt Water Pool and Koi Fish Pond Salt level testing!
CANNOT work for Sea/Marine/Salt Water Fish Tank Salt level testing!
CANNOT work for Food salt level testing!
CANNOT work for any other application!
It is NOT waterproof!
Packaging:
1 x Digital Salt Salinity Tester Meter
Deanna M. Caswell
Reviewed in the United States on July 25, 2023
Doesn’t work
sephora hall
Reviewed in the United States on September 2, 2022
Wasn't as accurate as test strips
Timothy C Queenan
Reviewed in the United States on July 6, 2022
readings not close , told seller & never heard back
Steve P
Reviewed in the United States on May 22, 2022
I have a Hayward saltwater chlorine generation system in my pool.This is a must have to do spot checks on the system to assist in proper calibration of the Hayward.This may help someone.Before you replace your board. A question for you. !!! Are your display lights and numbers fidgeting ? If the are replace the display first. Its much cheaper than the board about $115 vs $400. If not try this also my own pool did this.I put an old board in that I had replaced the thermistor in. After a new aftermarket board lasted 2 days.I was confused about the salt level numbers saying 2.7 and red lights were on after 30 seconds or so.Turns out I needed to check all my settings. It was in metric was set for t-3 cell mine is t-15 and had to calibrate the salt level. I have a hand held electronic salt meter and it’s normally very close to the Hayward reading. I had to toggle it from off to auto a few times to get it to start counting down like you’ve seen in calibration videos then flip it up to super chlorinate and back to auto to hold the setting. But now lights are green and everything it good in the pool.
Placeholder
Reviewed in the United States on June 6, 2021
Salinity reading was way off. Cheap not accurate junk
Janet S.
Reviewed in the United States on February 20, 2021
I assume this works fine in the parts per million range, but I have a mixture I know is at least 9 parts per thousand and it told me it was 2.4 parts per thousand (displaying 240x10 ppm)!
KristenJ123
Reviewed in the United States on April 16, 2021
Cheap
Recommended Products