Transmission Fluid Transfer Pump Kit, 10L Pneumatic Fluid Extractor and Dispenser Tool with Adapter for ATF Fill, Gear Oil Refill, Differential Oil, Garage and Shop Fluid Evacuator and Filler

YOU MAY IN NEED OF IT

• 1. For safety consideration

Any fluid in a machine has its own unique function and service life. Regular maintenance and replacement are essential, so as to ensure the normal operation of parts and extend their service life, save more unnecessary costs and increase driving safety

• 2. Multifunctional use

ADAFIRST pneumatic transmission fluid pump tool kit is equipped with a wide range of accessories for wide applications and diverse functions. Two-way extract and dispense function, pneumatic operation function make the liquid changing operation more convenient and efficient

SET INCLUDES

Fluid Transfer Tool Kit

• Pneumatic Fluid Changing Pump Unit x 1
• 80" Main Hose with Flow Control Valve x 1
• 1M Dipstick Tubes with Quick Plug (O.D. 6MM 8MM 10MM) x 3
• Spare 1/4" European Air Plug x 1
• ATF Adapters x 15
• Custom-made Toolbox, 10-1/2 x 8-1/2 x 2-1/4 inches x 1

Application for 15PCS ATF Adapters

• ATF101 (1/8"-27) Fits Ford
• ATF102 Fits universal BMW, Nissan, Honda, etc
• ATF103 Fits Audi, VW, Skoda
• ATF104 Fits Porsche, VW, Audi
• ATF105 (M10 x 1) Fits VW, Mini Cooper, Audi
• ATF106 (M24 x 1.5) Fits Audi, VW DSG
• ATF107 (M22 x 1.5) Fits Audi, VW CVT
• ATF108 (M18 x 1.5) Fits Skoda, VW
• ATF109 (M12 x 1.5) Fits ALTIS 2010 BENZ 722.9
• ATF110 (M30 x 1.5) Fits Skoda, Audi, VW
• ATF111 (Universal Flexible 300mm) Fits Honda, Kia, Hyundai, etc
• ATF112 (M8 x 1) Fits Nissan, Infiniti
• ATF113 (M18 x 1.5) Fits Toyota,Lexus
• ATF114 (5/16"-24UNF) Fits VOLVO
• ATF115 for Universal Usage (Flexible Hose)

Change Motor Oil for Crankcase (OR Change Fluid for Transmission Case and Differential)

1.Park the vehicle in a dry and ventilated place away from the fire sources, set "neutral" or "parking", and step on the parking brake.

2.Start the engine to normal operating temperature, and then shut down the engine.

3.Remove the engine oil dipstick for changing motor oil (OR Remove the transmission fluid dipstick or fill plug for changing transmission fluid).

4.Select a suitable diameter dipstick tube and insert it into the dipstick hole, move the tube in the dipstick tube up and down to ensure it was getting to the bottom.

5.Connect the dipstick tube, the main hose, the pump assembly, the two-way air compressor, make sure all the parts are well connected without leakage, and close all the valves.

6.Place the blue screw valve and the air inlet ball valve on "EXTRACT". Open the air compressor (choose vacuumize function), handle trigger (lock the handle trigger), and ball valve on the main tube to extract the oil or fluid from engine.

7.Once all the oil or fluid is extracted, close all valves, take out the dipstick tube from engine oil dipstick (OR transmission fluid dipstick or fill plug) and insert it into waste oil tank. Place the blue screw valve and the air inlet ball valve on "DISPENSE". Open the air compressor (choose pressurize function), handle trigger (lock the handle trigger), and ball valve on the main tube to dispense the waste oil or fluid. Observe the pressure gauge and keep the pressure under control.

8.Extract clean solvent or engine degreaser to rinse out the reservoir tank and dispense it out to waste liquid tank. Allow it to dry thoroughly.

9.Then extract new motor oil (OR transmission fluid) and dispense it into engine crankcase (OR transmission) until the desired level.

10.Follow your vehicle's operating instructions to circulate the new oil and then re-check the level

Please note:

1.Please operate under the guidance of professionals and wear protective glasses gloves at all times

2.Fluid temperature range : -3°F ~ 140°F

2.While change the coolant, make sure the engine is cool, to prevent the hot coolant from spraying and scalding

3.This engine oil change tool kit can be used for any insertable pipe or tank to change non-corrosive and low-consistency liquids, such as engine oil, transmission fluid, differential fluid, transfer case fluid, gear oil, power steering fluid, coolant, water in vehicle, jet ski, lawn mower or other small engine. Do not use for corrosive liquids to avoid corrosion of parts.

4.While use ATF adapters to change the transmission fluid, you need to lift the vehicle and drain the old transmission fluid from the drain plug on the transmission pan, then add the new transmission fluid from the fill plug or drain plug.

5.If the fluid is absorbed or drained slowly after repeated use, check the small blue cap on the nut and shorten the thread of the cap to restore the circulation speed

6.If the operation is not smooth, please carefully check the sealing of each part but not try to open the black cover.