Shopping Cart

Your cart is empty.

Your cart is empty.

WALFRONT DC 6-60V 12V 24V 36V 48V 30A PWM DC Motor Speed Controller (PWM) Speed Adjustable Stepless Governor Regulator Motor Speed Controller with Start Stop Switch

Free shipping on orders over $29.99

$14.20

$ 6 .99 $6.99

In Stock

About this item

  • Input Voltage Range: DC6V-60V (Input Voltage Should Be Same As Motor Rated Voltage)
  • Easy Installation and Operation: This Motor Speed Controller adopts with screw terminals for convenient and quick wiring, and it also comes with an adjustable momentary start/stop switch and a speed control potentiometer to ensure an easy and convenient control, you can control it easily
  • LED Display Design: This DC Motor Speed Controller designed with a a digital display, which shows percentage rate of actual speed to maximum speed, so the data is readable through the LED display, you can get a precise data easily
  • Wide Input Voltage Range: This PWM DC Motor Speed Controller supports a widely input voltage from DC 6V to DC 60V, and it fits to 12V 24V 36V 48V power supply, at the same time the output current is 0A-30A, which ensures a widely application. You can use this Adjustable Motor Controller in different occasions upon different purposes
  • Stable Performance: This simple and easy-to-use Motor Controller has an stable performance, and it has a momentary start/stop switch and a speed control potentiometer for easy operation, you can regulator it through the potentiometer to provide a better and stable performance



Product Description

PWM DC Motor Speed Controller

Note:

  • 1. Please allow small size error due to manual measurement. Thanks for your understanding.
  • 2. The digital tube only displays 0-100 motor full speed percentage, not the actual motor speed. For example, if the maximum motor speed is 500 rpm, it will display 100 at 500 rpm and 50 at 250 rpm.
PWM DC Motor Speed Controller
PWM DC Motor Speed Controller
PWM DC Motor Speed Controller
PWM DC Motor Speed Controller
PWM DC Motor Speed Controller

Customer Questions & Answers

  • Q1: If the power is cut off the unit will the momentary switch have to be pressed again or will the motor just start back up .
  • A: Based from my experience, the switch is initially On all the time. So if power comes back there is no need to press the switch.
  • Q2: Is there a soft or slow start feature in this unit?
  • A: If the RPM is set to zero when it’s turned on you can slowly turn up RPM until fans start moving. I’ve got one of these running air circulation fans in my boat. It’s been going at 100% for a couple of months now.
  • Q3: Can this reverse polarity to run my motor fwd and rev?
  • A: It will not reverse a motor's rotation, just controls speed.
  • Q4: Can it operate a brushless fan motor?
  • A: Sorry, probably not work, it can only operate brush motor.
  • Q5: Also can you swap polarity on the output terminals
  • A: If you mean can you reverse the motor without rewiring it, the answer is no. This is a single direction speed control only. It has no internal H Bridge that I can tell.
  • Q6: What battery pack do i need to run this motor?
  • A: What this is used for is to control the ram's on a motor and I was using a 12v motor that generated electricity. This controlled the amount of rpms to put out the voltage I needed from the motor hooked to this to the amount of voltage I needed to run my generator motor. By increasing or decreasing the rpm I could go from say 10volts to 24 volts by using the rpm adjustment
  • Q7: Can I replace the potentiometer with a 3 wire foot throttle?
  • A: I think yes, just find if the pedal operates on the potentiometer.

  • Q8: What is the range of speeds that can actually be handled?
  • A: 10% ‑ 98%.
  • Q9: Can it change the speed of the window lifter?
  • A: Yes, it can.

Tony
Reviewed in Canada on January 3, 2025
Works as intended, I used a different switch for a nicer feel. The numerical output is to the best of my knowledge just a arbitrary 0-100 scale but didn't concern me and worked good for a constant speed
Toymkr
Reviewed in the United States on January 22, 2025
I needed to be able to adjust speed of the motor for a miniature vacuum pump that is a brushed type permanent magnet motor. It works smoothly down to half speed limited there due to the limitation of the motor, that motor is designed with only two commutator bars on the motor armature.
Miguel Venales
Reviewed in Mexico on July 2, 2024
Muy bueno
Philp J Turner
Reviewed in the United States on March 18, 2024
The unit worked exactly as described.
Malacara
Reviewed in Mexico on March 1, 2024
si cumplió con la expectativa que esperamos
Customer
Reviewed in the United States on November 8, 2024
It worked as I had hoped, however, there was absolutely no documentation included. I expected at least a wiring diagram. It did present me with a problem mounting the unit. You will need to mount the display in a panel, basically in a rectangular cutout. It would have been nice if they included a template for the cutout or that least the measurements.
Harrison Lan
Reviewed in the United States on July 11, 2023
DO NOT PURCHASE IF YOU NEED 30 AMP CAPABILITY!The first time I plugged this in, I turned up the speed and it immediately blew the power control circuit. Full power all the time regardless of what the potentiometer position or power state (via the button).
leo
Reviewed in the United States on March 12, 2023
The media could not be loaded.
gary packo
Reviewed in the United States on January 16, 2023
Works great and easy to use was a great buy
Customer
Reviewed in the United States on March 26, 2022
The past was exactly as described and it works excellent
Peter pan
Reviewed in the United States on December 26, 2022
I repair electronics in the medical field and have for 17 years.I installed this on my kids electric atv. I went down our driveway fine but on the way back up the unit popped this large capacitor inside the module. The atv has a protective circuit that limit the motor's draw to 30 amps. This unit's component cannot handle the advertised power and should not be purchased for any circuit that requires 30 amps.
Polly
Reviewed in Canada on April 27, 2022
Bought this to control a 48V DC Spindle Motor on a CNC machine... Worked awesome! Measured the RPM before and after with NO noticeable differences. The LED output display screen shows a percentage rather than a direct voltage reading which I liked better. The unit has a large aluminum heat sink as part of its case. At the same time the speed control unit was installed in a plastic enclosure an SSR DC relay was added and switched on/off via the control software.The mounting tabs on the plastic bezel of the speed control are quite stiff and fragile. Ended up removing all four of them after one broke off trying to get it into the plastic project case. Did some re-engineering and fabricated a couple of mounts to secure the bezel to the top of the project case. Worked out very well and in the end much easier to install and wire.Great value for the money!
AESS
Reviewed in Canada on April 23, 2020
This unit worked very well of me, but took a bit to realize how the switch operated. It is one push and stays on, then have to push again to stop it. Did not realize that at first so just a caution depending on what you are trying to operate with it. I mounted it into a control box and worked out very nicely, but the tabs to lock in place are fragile, so make sure the hole is big enough and you take extra caution when mounting or dismounting it.
Recommended Products