Your cart is empty.
Your cart is empty. Overview
The PoE HAT (C) is a 802.3af/at-compliant Power Over Ethernet accessory for the Raspberry Pi 3B+/4B. By using this small HAT and some proper
802.3af/at-compliant power sourcing equipments, it is possible to provide both network connection and power supply for your Raspberry Pi in only one
Ethernet cable.
Features
1.POE HAT FOR RASPBERRY PI
Power Over Ethernet HAT For Raspberry Pi 3B+/4B, 802.3af/at-Compliant
(Any Backward-Compatible Future Versions Will Be Supported As Well)
12V and 5V power outputs to support more peripherals
2.For Use With Raspberry Pi 3B+/4B
Standard Raspberry Pi 40PIN GPIO Stackable Header, Allows Connecting Other HATs
3.Power Over Ethernet
Providing Both Network Connection And Power Supply For Your Raspberry Pi In One Cable
4.5V USB-A & 12V Header Outputs
5V USB-A Provides Up To 4A Output (MAX 25W For 12V+5V Total Output Power)
Be Able To Power Extra Device While Providing Stable Power To Raspberry Pi
5.Active Cooling Fan
6.Onboard MP8676 Buck Chip
Incorporates Original Voltage Buck Chip Providing Up To 4.5A Output For Raspberry Pi And USB-A Port
Specifications
POE input voltage: 37V ~ 57V DC input
POE-USB Type A output voltage: 5V 4A (MAX)
POE-Pin header output voltage: 12V 2A (MAX)
Network standard: Support IEEE 802.3af/at PoE
Product size: 56.5 × 65mm
Package Content
PoE HAT (C) x1
Heatsink x1
Standoffs pack x1
Note
Development Resources is provided , please contact us if you have any problem .
Benjamin Stürmer
Reviewed in Germany on January 6, 2025
Keine Steckdose zur Hand aber Netzwerk? Dann lässt sich der Raspberry Pi b Generation 2 hiermit mit Strom versorgen
Steve
Reviewed in the United States on January 13, 2025
It works, poe saves me a power cable!
Moises s.
Reviewed in the United States on August 11, 2024
It works as intended and it’s easy to install. Pretty cool product.
Lluís Melgar
Reviewed in Spain on July 11, 2024
el ventilador es ligeramente ruidoso ( se apaga con un interruptor deslizante )Funciona correctamente
Shelby J. Denike
Reviewed in the United States on June 13, 2024
Bought a few of these for a project that was being worked on. Worked out of the box and have had no issues. The fan was a little louder than expected but nothing that was too obnoxious
Ed N
Reviewed in the United States on May 20, 2024
There's a lack of photos from underneath this unit. Fan is 5V / 0.11A. Order a bunch to replace as a maintenance item.
Mystikos
Reviewed in the United States on December 30, 2024
I wanted to get rid of the power cable running my pihole. this does the job! originally I had the pi in the stock case you can purchase, but with the HAT it doesn't fit. I went to printables and found cases meant for this HAT! the once i chosse was the Fractal Baby North. temps with the fan on are great. but dont turn it off unless you have some good airflow in the case you have!
Chris
Reviewed in the United States on December 12, 2024
Bought three of these, and they're all working great after a year of 24x7 operation. The only downside is that the fans on all three failed over the first 4 months, so plan ahead on replacing those.The fans are 30mm x 30mm x 8mm 5V (though you could use 12V as well with the other header on the board).
AP
Reviewed in France on October 21, 2024
Le gros avantage du produit est clairement l'opportunité d'accueillir une Shield supplémentaire : le port GPIO n'est pas condamné !Par contre il est nécessaire de remplacer de suite le petit ventilateur trop bruyant (Remplacé en lieu et place par le GeekPi 30x30 5V trouvé sur Amazon également)Une fois en place mon RPI4 tourne autour de 40°C sous Jeedom dans un boitier GeekPi Mini Tower NAS
Guillaume
Reviewed in France on October 18, 2024
Parfait ! Contient tout le nécessaire pour le monter (entretoises etc), le ventilateur est silencieux, et bien sur il alimente parfaitement le Raspberry Pi !
Aaron Turner
Reviewed in the United States on March 13, 2023
Overall, this is a great PoE adapter for a RasPi 3 or 4. No problems powering either. I love that all the GPIO pins are passed through so I can add additional hats/etc. Only real problem is that the fan is of bad quality and one of two of these units it keeps stalling/making an annoying noise. Seems like a cheap sleeve bearing.
John H.
Reviewed in the United States on October 24, 2023
I had POE Hats on my Raspberry Pi 4s that had very noisy fans. Replaced them with these wave share POEs. The ethernet works, it delivers power and the fan is very quiet!!
Malte Schad
Reviewed in Germany on March 2, 2022
funktioniert wie in der Beschreibung angegeben. Lüfter ist z.T. etwas laut - PoE funktion in Kombination mit Ubiquiti Switch tip top ohne spezielle Einrichtung.
Recommended Products
![Arduino Nano ESP32 Without headers [ABX00092] ESP32-S3, USB-C, Wi-Fi, Bluetooth, HID Support, MicroPython Compatible](images/loading.gif)