Your cart is empty.
Your cart is empty.Product Description
Power-Flex Welding and Battery Cable
WindyNation's Power-Flex welding battery cable is a highly flexible industrial grade electrical cable manufactured right here in the USA! A high strand cable count combined with a soft, pliable EPDM insulation results in a flexible cable every time. Our cable is resistant to tears, cuts, abrasion, water moisture, and oil based solvents.
- 3:1 shrink ratio.
- Operating temperature: -55C to 125C.
- Resistant to many solvents including salt water, gasoline, diesel, grease/lubricants, etc.
Pure Copper Tin Coated Cable Lugs
Heavy Duty
WindyNation's pure copper tin coated cable lugs are heavy duty, pure copper, and meet the standard for 486 WIRE CONNECTORS AND SOLDERING LUGS. Our cable lugs are ideal for marine and humid environments because the tin coating protects the copper cable lug from corrosion and oxidation. If you need cable lugs for an outdoor installation on your RV, boat, car, truck, golf cart, off-grid wind or solar installation, then WindyNation's tinned lugs are your go to choice!
Wide Range of Uses
Manufactured In The USA
WindyNation's Power-Flex welding and battery cable is manufactured in the USA. Each cable that leaves our warehouse is precisely cut on an automated robotic cable processing machine and double checked for quality and accuracy before it is shipped out to our customers.
reuniti
Reviewed in the United States on September 6, 2024
The strands in the wire are very fine and it is very flexible
Jonathon Yakel
Reviewed in the United States on July 5, 2024
Used this to redo the battery wire on my pick up and they worked great. Pure copper and thick jacket and still playable.
John
Reviewed in the United States on February 12, 2024
Really high quality stuff, but both black and red wires only measured 70 inches stretched straight but is advertised at 6’.
Km21
Reviewed in the United States on December 18, 2024
Good quality cable and fittings, very quick International shipping
Souxinh
Reviewed in Canada on May 14, 2023
As described.
Al Rude
Reviewed in the United States on March 14, 2023
Adding solar to the RV and used the 4/0 for the main battery and inverter connections. wish i had used for everything else as its quality, small copper wires and when they say flexible, it is... Also easier to cut than other brands. I was using another brand until I found this brand and while it was small wire copper, this cable is more dense and easier to work with. At some point I may go back and replace some of what I have already done with some more of this.
Kurt W.
Reviewed in the United States on December 13, 2023
I used this kit to install an inverter on my RV. The wire was good quality and install was a breeze. The system has been working liken a charm for 3 years now!
Adriane Norton
Reviewed in the United States on October 14, 2023
Appears to be full Copper, very flexible and most importantly the 1/0 guage (version I purchased) measured between 8.5mm and 10.4mm diameter in several measurements. Spec for 1/0 AWG is 8.25mm for solid and 9.1mm for stranded. So its right on for the stranded spec. I did a bit of comparison and for a short run of wire this was the best deal I found for copper wire. If you buy the copper clad aluminum (much cheaper) you will need to increase the size by about 40% to account for the lower conductivity.
Adam
Reviewed in Canada on June 15, 2022
Flexible wires, copper core lug connectors and length was correct.
Joshua
Reviewed in the United States on December 6, 2022
The cable is high quality. The terminal ends are good quality and crimped on perfectly. The shrink tubing sealed it all up nice and tight. My Jeep runs nice and smooth. I partnered my custom cables with military grade battery terminals. Looking forward to many years of dependable operation.
Donavan Gouin
Reviewed in Canada on May 22, 2021
Ondulateur
Recommended Products