Your cart is empty.
Your cart is empty.
Description:
The item is 5 pcs Nylon Barrier Terminal Block. These terminals are used to facilitate the connection of the wires.
It is actually a section of metal sheet that is enclosed in the insulating plastics inside, both ends of the hole can be inserted into the wire.
There are screws for fastening or loosening, such as two wires, sometimes need to connect, and sometimes need to break,
then you can use the terminals to connect them, can be disconnected at any time, without having to weld them or wrapped in together,
it's very convenient, wide application.
Summary of features:
(1) Product name: Double Screw Barrier Terminal Block, 2 position, 3 position will be sold together.
(2) Maximum rated voltage: 600V.
(3) Maximum rated current: 36A.
(4) Pole: 2 position, 3 position.
(5) Package quantity: 5pcs.
(6) Color: Red.
(7) Size: 21 x 21 x 21 mm/0.83 x 0.83 x 0.83 inch, 33 x 21 x 21 mm/1.22 x 0.83 x 0.83 inch.
(8) Mode: H2519-2, H2519-3.
(9) High-grade material: PC resin material, flame retardant, brass terminals.
(10) High quality: Flexible, high temperature resistance, impact resistance, safety, easy installation, high electrical conductivity, good insulation, flame retardant.
(11) Widely use: Widely utilized in a variety of lamp, decorated lighting, factory, household appliances and power distribution cabinets, distribution boxes and
other transmission equipment, specially point at wire, cable access and out.
Package including:
3Pcs x 2 position Barrier Terminal Block
2Pcs x 3 position Barrier Terminal Block
Tips:
1. Products contain sharp parts, please do not let children play, prevent stab wounds.
2. It is the genuine item sold from our shop, if you have any questions, contact with us, we will give you best service.
Some User
Reviewed in the United States on May 29, 2023
My order arrived with 3 screws missing. These seem to be standard M3s though, so should be easy to replace.
M. Higginbotham
Reviewed in the United States on November 6, 2023
I have a controller with at least two of these power blocks in them. The mounting screws were a perfect 1/2” apart. I was able to mount the new block to the old mounting holes. They werent exactly the same size and the block i replaced was white (these are orange). But other than this, these fixed my broken part. The scew for each lug is a little small, but it works
John
Reviewed in the United States on February 26, 2020
This terminal block will accept (barely) 10awg stranded wire. However, it cannot accomodate a 10awg stranded wire with a ferrule crimped on. The openings are round, with a flat plate on top that is pressed down onto the wire by the screw. The plate is very thin sheet metal, so that isn't robust.
generico
Reviewed in the United States on November 23, 2020
I use these for temporary connections, and I used on of the the 2 position for a lamp I have. It used to use wirenuts, but that was inefficient as it was 14awg spliced to 18awg stranded. So this connector makes a good way to splice two different sizes - solid core and stranded notwithstanding. These have a good heft, look good for light duty usage, and are nice quality nylon. They are very bright orange for high visibility and caution.Very happy with the quality for the price!
Norman Parron
Reviewed in the United States on September 9, 2019
They work as they should and look great on our orange assembly
vvim
Reviewed in the United States on December 22, 2019
these are more heavy duty than the regular white terminal blocks you see everywhere, and they can take solid AWG10 wire. It holds the wires down with a clamp, not just the screw itself, so you could also stuff stranded wire in there - but maybe put some solder on the wire, i.e. make it "tinned".The plastic & its coloring look high quality.
Terry G. Customer
Reviewed in the United States on November 19, 2018
I bought some of these terminal blocks before, the 8, 10 and 12 terminal blocks. Half of the screws had fallen out and were loose in the bag. This time some screws were in the bag, but one of the 3 terminal blocks is missing the part that the screw pushes down to hold the wire. They good blocks, but having to put screws in and now parts missing, they are a pain.
Chris V.
Reviewed in the United States on October 21, 2018
They work but the screws were missing on a couple and the metal was bent so I had to straighten before using.
Recommended Products
