Your cart is empty.
Your cart is empty.Product Description
- 1)Assemble the doorbell and along the wall from the socket without existing doorbells or wires. Easy to install and able to set up in minutes.
- 2) Connected through a doorbell transformer, it is best to use it together with the product battery to maintain operation even in the event of a power outage of 120.
- 3) The doorbell transformer does not have a battery. AC120V main power supply is required.
- 4) The doorbell transformer can only supply power and cannot charge the battery.
- 5) The doorbell transformer is suitable for all doorbells with an input of 8-24V. Please follow the instructions on the doorbell.
- 6) If it is found that it is not charged, please check if the 120V voltage connected to the doorbell transformer is normal? Check if the interface connecting the doorbell is loose?
- FOR DOORBELLS
- 1）Keep adapter unplugged
- 2）Install wires from 18 volt adapter into the terminals for your doorbell unit (any wire can be connected to any terminal)
- 3）Plug adapter into outlet
- 4）Put doorbell face plate on housing unit
- 5）Power up and verify your doorbell is receiving necessary power using the accompanying application
Continuous power supply
It can be continuously Power supply your device without worry about taking off the doorbells/ thermostats and low battery, which is time-saving and effort-saving.
Easy to Install
1.Keep adapter unplugged.
2.Install wires from 18volt adapter into the terminals for your doorbell unit (Simply attach the two rings to the doorbell and tighten the screws, regardless of positive or negative polarity)
3.Plug adapter into outlet.
4.Power up and verify your doorbell is receiving necessary power using the accompanying application.
No worries about power failure
Provide continuous power to your device so that the video doorbell can run continuously without interruption.
Specifications
- Input voltage: 120 V AC, 60 hz,
- Output voltage: 18 V AC, 1000 mA,
- Dimensions: 29.5 x 15 x 11 inches
- Cable length: 500 cm ( 196in)long enough to connect a socket and the doorbell.
Compatible with：
- visual doorbell
- visual doorbell 2, 3, 3Plus, and 4
- Eufy Video Doorbell
- Ring Video doorbell
- Wyze Doorbell Pro
Wire Type: Stranded copper wire
- With an output voltage of 18VDC1A Sufficient power and current to power the doorbell, this adapter is perfect for power-hungry doorbell systems. It's capable of providing a stable and consistent supply of power to your doorbell system, ensuring optimal performance at all times. Plus, the adapter is equipped with a built-in protection system that shields your doorbell from surges and voltage fluctuations
- making it a safe and secure choice for your home.Thanks to its compact size and lightweight build, this doorbell adapter is easy to install and use. Simply plug it in and connect it to your visual doorbell, and you're ready to go. The adapter is also compatible with a wide range of doorbell systems, so you can rest assured that it'll work seamlessly with your setup.
V.Karapetian
Reviewed in the United States on March 25, 2025
Not working with the Ring Battery Doorbell. Should be 24v not 18v. Don't waste your money and buy the original..!
DJSELF805
Reviewed in the United States on September 24, 2024
This 18V1A power adapter is exactly what I needed for my video doorbell. It provides a stable and reliable power source, so I no longer have to worry about recharging batteries. Installation was super easy, and the length of the cable is just right to reach my outlet. It has been working flawlessly since I set it up. Highly recommend this adapter for anyone looking for a hassle-free power solution for their video doorbell!
loco287
Reviewed in the United States on September 1, 2024
I just received the 18V1A Video doorbell Power Adapter for Video Doorbell, Ring Video Doorbell Pro and Ring Video Doorbell 2,Transformer Compatible with Zmodo Smart Doorbell and Nest Hello Doorbell(16.5Ft Power Cord). Connected to Ring Doorbell Pro.Works well. I grabbed this power cord adapter based on the description. The installation was fast and easy. Does required running the wire, I did make a small hole from behind the door bell and then fished the wiring through. An outlet was close by. So no issues with that aspect.Fair priced and very affordable. Essentially an upgrade that will not require monitor or switching/recharging batteries. A good hop-up. Well welcomed.
CW115
Reviewed in the United States on December 9, 2024
This has very long cord to accommodate outlets that are far away (up to 16.5ft) from the doorbell camera. You can conceal the wiring under siding for a cleaner look or just run it inside through the wall to plug into an interior outlet.
Tim Bingham
Reviewed in the United States on November 5, 2024
Its a great power adapter and cord. It solved my ring doorbell issues.
Alex Richards
Reviewed in the United States on October 31, 2024
Super easy to install and a game changer since I don’t have to unscrew off the wall to recharge anymore. Thus is good for who’s Ring doorbell camera is not hard wired as this method It works as it is.
3D Maker
Reviewed in the United States on October 3, 2024
I have a Ring Battery Doorbell Pro and it does work, but there are a few caveats. First, while polarity is not supposed to matter, it apparently does with the Ring Battery Doorbell Pro. With the wrong polarity the battery will not charge, while with the correct polarity it will charge ~1%/day. When using a DC power supply, the doorbell cannot be powered. The doorbell will only use the battery, and charge at the same time. The last caveat is that the Ring app will not show that you are hardwired or connected to solar power, so you will not know if it is connected properly until you see that the battery is charging.If your ISP remains online during a power outage, make sure that your Internet connection devices are powered during a power outage to stay connected to the Ring servers during an outage. The power adapter is not very heavy, so you shouldn't need to worry about it straining the plug. Since it does what it is supposed to, I can recommend this power adapter with the caveats listed above.
Paul R Manangan
Reviewed in the United States on October 22, 2024
The design of this lends itself to result in a straightforward ugly exposed wire installation. If you know what you are doing this could be fine and you would know how to splice and feed the cord but if you don't this might not be the solution for you.
Recommended Products
$39.99
$ 19 .99 $19.99