Your cart is empty.
Your cart is empty. With single-chip control system, some functions could be altered:
Startup: Flexible slow startup/direct startup
Braking: Reverse load quick braking/free braking
Adjustable Timing: Small/medium/large
Low Voltage Protection: Low/medium/high
Battery Types: Lithium /nickel chrome/NIMH/plumbic acid
Back to Factory Settings: Wrong operation can be cleared
Other Function(please ignore if only used for motor drive ) : The external PWM signal generator can send signal to control speed or to turn steering gear, therefore it can test steering gears less than 55 g.
30A ESC parameters:
Output: continuous current 30A, short-time current 40A (not less than 10 seconds)
Power input: 5.6V—16.8V (2-3 lithium batteries or 5-12 nickel-metal hydride / nickel-cadmium batteries)
BEC output: linear regulation mode, 2A
High speed: 2-pole motor (210,000 rpm), 6-pole motor (70,000 rpm), 12-pole motor (35,000 rpm)
Size: 45mm * 24mm * 11mm
Weight: 25g
ESC tester parameters:
Output: ≤15mA (5.0)
Input voltage: DC 4.5-6.0v
Output signal: 1.5ms ± 0.5ms
Adjustment method: manual, neutral
Dimensions: 42.5 x 24.0 x 23.5mm
Weight: 9g
We highly appreciate all customers opinions to improve the selling, also if anything you unsatisfied, please contact us for probable best solution.
Package Includes: 1Pcs
Denis P.
Reviewed in the United States on August 23, 2024
So far I've requested somedocumentation on how this is intended to work no response
Zachary
Reviewed in the United States on November 24, 2024
I have this set up to a 3 phase motor and I've found that at MOST it'll get it to barely move if I'm lucky. Very bad, do not buy!
Jess
Reviewed in the United States on November 17, 2024
purchased to test a broken string trimmer that uses a (120W) BLDC motor. I removed the motor from the tool and hooked it up to this little 3-phase BLDC driver and applied 12VDC to the input. It worked exactly as it should. The potentiometer controls the wave-form coming out of the built-in micro-controller, which controls the speed of the motor. I did not try the other features for servo control or put the controller on the o-scope to see its limits, because I didn't need too. I know the motor from the trimmer is good, so I can reuse it in another project, maybe even with this ESC.
Craig Saunders
Reviewed in the United States on June 30, 2023
I used this to power a brushless motor I found in an old laser printer for a fun robotics hobby project. Works well as a brushless motor controller. The functions work well too and can handle higher amperage at lower voltages for the most part. The design of the tester could use some polish and it's hard to press the mode button, but other than that it was satisfactory.
Customer
Reviewed in the United States on March 7, 2023
Works as advertised, however I don't like the "feature" that it resets the speed controller when battery voltage is dropped then re-established. However, it did say that this was (unfortunately) a "feature" when I purchased it. If anyone knows of a similar product that does not have this limitation, please let me know. (my application requirements require that the selected motor speed be re-established automatically when power is reapplied). Thank you very much.
Lloyd Reavis
Reviewed in the United States on February 18, 2023
I used this to power up my 2 thrusters iv put on my kayak. This has been an on going project of mine and have bought quite a few electrical parts like switches things of that sort and found that none of them come with instructions for the diy ers. This controller handles coming off a car battery and powers my boat nicely. Later I will buy a more permanent but for now . Im happy
John R Crossett
Reviewed in the United States on February 14, 2023
I purchased this device in the hopes it would allow me to test some tiny 3-phase motors I never got that far. When I connected the control box, I monitored the three output lines with scope. I found normal square waves on two of the three lines. I then peeled back the plastic sleeve on the controller for a closer look at the MOSFETs driving the three outputs; comparing the good with bad channels it is still hard to say what component is failing. At any rate, I doubt if iI will order another one hoping this was just a one-off situation i.e. definition of insanity.
matt cioci
Reviewed in the United States on December 26, 2021
Works well for the price
Recommended Products
