Shopping Cart

Your cart is empty.

Your cart is empty.

2.5G Type C PoE Splitter 5V/4A, 48V PoE to USB-C 5V/4A 20W Output, 2.5Gbps Ethernet Comply IEEE802.3af/at, Plug and Play for Smart Home/Pi 4B/4B+ (TYPEC0504G)

Free shipping on orders over $29.99

$15.19

$ 6 .99 $6.99

In Stock

About this item

  • Type-C 5V/4A Output:48V PoE convert to Type-C (USB C) 5V/4A adaptive power output, the Type-C port only for power charging.
  • 2.5Gbps Speed:Support up to 2.5Gbps Internet speed, enable your device run at full speed. Provide super fast Ethernet transmission without delay.
  • Easy Setup:Easy to power your Type-C device with plug and play function, Auto detect power from Power Sourcing Equipment. Auto deliver proper power for Type-C device.
  • Multiple Protection:Support the isolation circuit protection, the short circuit protection, the overvoltage protection, can effectively protect your equipment.
  • How it works:Using IEEE802.3af/at PoE switch or PoE injector power the Type-C (USB C) Splitter, the PoE splitter will separate power and data via RJ45 port and Type-C port, provides power and data for Non-PoE terminal Type-C device like smart home device.


Note:
2.5Gbps speed performance requires 2.5GB capable networking infrastructure, please eusure your network environment support 2.5G Ethernet.
Specifications:
Support international standard IEEE802.3 af/at;
POE port Support 10/100/1000Mdata transmission
PD support 44V-57V voltage transmission, Automatically detects power supply from PSE power supply module
5V/4A power output using Type-C, the Type-C port only for power-charging.
Support the isolation circuit protection, can effectively protect electrical equipment.
Support the short circuit, overvoltage protection
1500V high voltage isolation
Model: TYPEC0504G
Transfer Rate: 10/100/1000Mbps
Power: Input 48V DC/0.6A, Output 5V/4A
Standard: IEEE802.3 af/at
TRNF: 1/2(+),3/6(-);4/5(+),7/8(-)
Interface Type: 1 Input RJ45 port, 1 output RJ45 port, 1 DC output(Type-C)
Standard: IEEE 802.3 I, IEEE 802.3 u, IEEE 802.3 x, IEEE 802.3 af, IEEE 802.3 at
LED: Yellow PoE lamp
Temperature: Work within -20~50°,Storage within -30~60°
Humidity: Work within 10%~90% (Non-condensing), Storage within 5%~95% (Non-condensing)
Abmessungen: 27.5 x 2.8 x 2.3 cm (L*W*H)
Weight: 0.05kg
Package Content:
1 x Gigabit POE Splitter (TYPEC0504G)


T. Hsu
Reviewed in the United States on March 21, 2025
Works for the Beryl travel router I need to use sometimes.
Crash
Reviewed in Canada on February 27, 2025
This is great and works well for equipment using 12v. I wish they had a few different voltage options. 19v for a thin client pc would have been perfect.
Andrew
Reviewed in the United States on February 16, 2025
Used this with a tip adapter to power my wired Roku Ultra. Works great, and removes a transformer from the rats nest behind my television.
Nathan
Reviewed in the United States on July 20, 2024
I am using this to provide power and data to a Beryl-AX Router. It works well and provides more than enough power for the device.
Gregory Beggs
Reviewed in the United States on July 15, 2024
This delivers stable power as advertised. I get good power, which is good for cameras etc. It does get hot— I would put this is a location with a few inches of free flowing air to be safe.I have many Asus/Netgear/eero Wireless access points and other devices such as with Intel I211 gigabit ethernet cards that just cannot get 1000 from the adapter. They get 100. Possibly some chipsets are more lenient than others. My switch is a Dell U1026P on the high power ports.
Customer
Reviewed in the United States on March 5, 2024
Though it says 4A and the recommended power requirement of Pi5 is 5A, it works just fine with a NVME drive attached to my Pi5. A POE+ switch is needed.
R. R. Pace
Reviewed in the United States on March 25, 2024
I updated all my home networking with Cat 6 cabling, and 5 NetGear GS308P and GS308PP managed POE switches. I purchaed 5 or 6 of these splitters. These POE Splitters start out working fine, but the voltage/current they put out can't keep up with the Orange PI 5 plus which should be 20 watts or less, with average power need being 18 Watts. The splitter gets quite warm in use and creates brown outs with the attached Orange Pi 5 Plus units. Tested with 7 different Orange Pi's . Tested a single POE attached Orange PI 5 Plus with a 124 Watt POE NetGear GS30EPP and still could not consistently power the Orange Pi 5 Plus. If you are looking to provide POE power to Orange PI 5 Plus then forget it.
Aaron Greco
Reviewed in the United States on February 20, 2024
This product actually gave me gigabit speed unlike other splitters on amazon that claim to be gigabit but really are 10/100 and only have 2 pairs…. this gave me a full gig passing through it no issue. Power seems to be working great powering my airplay receiver
Pierre
Reviewed in Belgium on December 7, 2024
Fonctionne très bien pour alimenter un mini-pc peur consommateur d'énergie.Il existe plusieurs modèles, vérifiez donc bien la tension attendue par l'équipement que vous voulez alimenter ainsi que la dimension du connecteur d'alimentation.
mond
Reviewed in Japan on December 28, 2024
PoEの給電は問題ないのですが、LANの通信が怪しくなって来ました。(pingは通るがその後の通信が不安定)まぁお安いので壊れたら買い換えればOKですが、業務目的には向かないかもしれません。
Derrick S. Hurley
Reviewed in the United States on October 4, 2024
Works as expected. Using this one to power a Hubitat Elevation C8 with PoE. Boots and operates just fine and gives my home automation some battery backup due to PoE switch on a UPS.
Krystov
Reviewed in France on January 18, 2024
Utilisé pour alimenter un Raspberry 4 dans un environnement industriel, ce splitter PoE fonctionne parfaitement.Le réseau est performant et stable. Aucun incident ou coupure depuis son installation.
Recommended Products

$15.00

$ 7 .99 $7.99

4.3
Select Option

$10.50

$ 4 .99 $4.99

4.8
Select Option