Your cart is empty.
Your cart is empty. Notice:
This POE Splitter is suitable for household IP camera with DC 5V power (as the kind in the photo of the instruction),it does not suit equipments with DC 12V power.
Power Output Port: 3.5x1.35mm DC Power Plug (and 5.5x2.1mm DC power Plug by adapter).
RJ45 female INPUT Port:
Support the IEEE 802.3af the Power over Ethernet PoE Switch
Support 48V Unsolicited Power Over Ethernet PoE Switch
Support 48V Unsolicited Power Over Ethernet PoE Adapter
Specification:
Compliant with IEEE802.3af
Isolation: 2.5kV
Power Input: DC44~57V
Power Output: DC5V 2.4A[inside positive (+) , outside negative (-)]
Data&Power INPUT Port: from RJ45 female (Compliant with IEEE802.3af/at PoE)
Data Output Port: RJ45 Male
Power Output Port: 3.5x1.35mm DC Power Plug (and 5.5x2.1mm DC power Plug by adapter).
Data Transfer Rate: 10/100Mbps
Devices will be detected before poe input
Power Pin:support both 1/2(+/-),3/6(-/+) or 4/5(+),7/8(-)
Body size: 80 x 27x 22 mm
DC cable length£º165mm
RJ45 Modular Plug cable length£º155mm
Weight : 55g
Item Included:
48V to 5V Active PoE Splitter x1
3.5x1.35mm Female to 5.5x2.1mm Male DC port Adapter x1
YK
Reviewed in the United States on March 19, 2024
didn't work for my project. I'm not sue why,
Colum F.
Reviewed in the United Kingdom on November 6, 2024
I use this to drop my poe switch voltage down to 5 for my outdoor tapo camera no issues so far.
Fabrice Villain
Reviewed in France on September 17, 2023
Je m'en sert pour caméra Reolink e1 zoom auquel j'ai dû ajouter un un bout de fil.2 pièces connecteurs de câble d'alimentation cc 17 cm pour adaptateur d'éclairage de caméra de sécurité CCTV femelle 5.5mmx2.1mm à mâle 2.5mmx0.7mm https://amzn.eu/d/2tWctsP
mac
Reviewed in the United States on June 28, 2023
No issues running my old cameras when used with my PoE switch. Easy way to avoid running dedicated power for longer cable runs.
Victor
Reviewed in the United States on October 23, 2023
I use these devices to connect battery-powered Ring Stick Up Cams to POE cables. I originally expected to rely solely on battery but then began dreading the thought of climbing the ladder to change batteries every 3-4 months. These splitters allowed me to connect my battery-powered Ring Stick Up Cams to existing POE cables. POE cable goes in this splitter, barrel plug goes to the Ring camera, the ethernet cable remains unused because Ring cameras are wireless. Works okay so far.
B.Smith
Reviewed in the United States on May 26, 2022
No issues at all, using a Zyxel PoE switch and a 5v Foscam camera, it was a simple plug 'n play setup that worked right the first time.
Alex
Reviewed in Australia on April 3, 2022
I'm connecting/powering two Hue bridges with this via my PoE capable network switch. But to do so you will need an additional 5.5x2.1mm female to 5.5x2.5mm male jack as the supplied adaptors are not suitable for Hue bridge v2. Your setup will end up looking like in the attached photo, a bit bulky but still much cleaner than having two power supplies, especially if you have limited space/power points. Had it for over a year and no problems so far.
Hugo C.
Reviewed in Canada on July 9, 2021
Used it to power a VOIP phone that is not POE
Ryan
Reviewed in the United States on March 17, 2021
I used this to power a Philips Hue bridge from a PoE-enabled switch. It works great, no configuration needed. This let me skip the power adapter that came with the bridge in favor of a much longer ethernet cable.
Jonathon W
Reviewed in the United States on July 30, 2020
Note that you have to plug the rj45 socket into the switch port that is supplying PoE, and the rj45 plug (and power plug) into the device that you're trying to power with PoE. I mean it's right there in the instructions on the product page now that I go and look, but...I had a socket coming out of the switch (so I needed an ethernet cable to plug the two sockets together) and a device that had a plug coming out of it (so I needed a dual socket connector to attach the two plugs). I found this counter-intuitive given my situation, but it is documented, so it's mostly my fault for not reading carefully.
T. Broach
Reviewed in the United States on November 5, 2019
I have several of these on IP cameras that require the additional 12 volts but do not run on standard POE via RJ45.No issues whatsoever. Could be used to power a separate IR iluminator also.
Mike Rogers
Reviewed in the United States on October 12, 2019
This is a great solution for getting 5VDC power to a remote camera or other device. I use this to split 5VDC off from a PoE line that runs to a Foscam R2 camera.I also use the Ethernet jack on the Foscam to pull the signal instead of using the built-in wifi capability. Using this splitter means I can power the camera AND get a solid, reliable video feed over a wired Ethernet connection from it.
[J|B]enny
Reviewed in Germany on March 31, 2017
Der PoE Splitter funktioniert super. An einem PoE+ Port angesteckt wird er sofort erkannt und mit Strom versorgt. Für diesen Preis ist die Leistung erst recht unschlagbar.Ich betreibe mit diesem Splitter ein Homematic LAN-Gateway. Die Spannung passt, der mitgelieferte Adapter auch und das Gerät wird zuverlässig und stabil mit Strom versorgt.
Recommended Products
