Your cart is empty.
Your cart is empty.Product Description
Learn More About 4pin 10mm RGB Connectors
DIY Strip to Wire Quick Connection Updated version of LED strip connectors, assemble wire by yourself as needed, flexible to different project! No need to solder. Just clasp your prepared led strip section into the connector to get connected. compatible with 30-120 LEDs/M strip, made of flame retardant material, safely use. Support high current LED strip lights.
Q:Do these connectors work with 24V system?
A: It would be ok for the connector to work with 24V system.
Q: Which type of light strip is suitable for?
A: 10mm width RGB strip lights with 4 Soldering Pads. both IP20 non-waterproof and IP65 waterproof light strips
Q: How should I connect the light strip?
A: You can pierce the strip light from the back or the front. For IP20 RGB strip, it is recommended to pierce from the front of the light strip, and for IP65 waterproof strip, it is recommended to pierce from the back, without removing the silicone on the surface of the light.
Q: If I accidentally cover the connector, how can I open it?
A: You can pry it open with a suitable screwdriver.
Unique design, easy installation
Upgraded strip to wire connetor
High-quality copper parts and solid materials ensure that the pin needle can effectively pierce the wire and the light strip. Compared with other connectors, the performance is greatly improved.
Suitable for IP20and IP65 strips
These 4pin led light connectors are suitable for 10mm rgb LED strip lights, can also be applied to both IP20 non-waterproof and IP65 waterproof light strips.
Reusable/ extension
The unqiue design is convenient for inspection or reinstallation, just use a suitable screwdriver to pry it open, and can be reused and expanded.
How to use the 10mm 4-PIN connector
1. Insert wires into the guide slot
and then press cap down
2. Align the Soldering Pads of the light strip surface with the pins on the connector. just please align the positive and negative poles of the light strip
3. Make sure the ‘+’ and ‘-’ polarity is correct.
4. Wire to led strip connection complete.
More applications
Pete
Reviewed in Canada on January 2, 2025
I like the channels to insert the wires but the connector by itself is cheap. If you press too hard the junction at the middle breaks and the connector is scrapped.
Customer
Reviewed in the United States on April 8, 2025
great product
Chris Kometz
Reviewed in Canada on March 23, 2024
The connection does not work well and if you even look at it wrong, stops working. I had to replace the led strips where these were used on because it shreds the strip. I ended up soldering all the connections instead. Would not recommend.
S. Manz
Reviewed in Canada on November 11, 2023
Happy
Mike L
Reviewed in the United States on April 16, 2023
These are far superior to the connectors that you have to slide the strip under the metal prongs. You simply line it up and close it. I'll never use the older flip-down ones again.
Spaceboy Ross
Reviewed in the United States on April 15, 2023
First, I thought this included wires from the product images. Second, I have a Zigbee controller but Govee lights and so instead of buying a new LED strip, I decided to use these to adapt the pins to wires. This solution barely works. The connection is way too loose which makes it barely work.
Andrew
Reviewed in the United States on December 19, 2022
They are pretty much easy endless you snap them before you use them buy accident cuz they will never unlock. Order extra if you need them like with every project in life.
Carl MK9
Reviewed in the United States on October 17, 2022
The connectors function well when assembled properly. There is a key assembly note that the user should be aware of. The LED strip should only be installed with the copper connector pads on the side of the connector with the pins. Even though the pins will puncture the LED strip from the other side, they do not made good contact in that manner.
DL Burke
Reviewed in the United States on January 1, 2022
After you separate the wires a tad, they just slip in. You do have to make sure you don't push the light strip in too far. They do ruin your nails prying them open. I gave adhesion one star because they didn't come with any kind of tape.
Ohi
Reviewed in the United States on April 11, 2022
These were perfect and seriously a breeze to use. I've been installing LED's around my home and I wish i noticed these earlier. One tip I have for everyone, no matter if they use these or any type of connector. I always test as I go to make sure the connections are stable, as you should. Once I know they are secure, I further secure them with electrical tape. This will also keep things from getting lose if you move anything around.
CosmicHam
Reviewed in the United States on November 30, 2021
I used 6 of these with LED 4-conductor ribbon cable to bridge the gaps in my lighting scheme and all of them worked fine. If the wire side is closed when you get them they can be a bit difficult to open. Pry along the saem with something narrow like a jacknife blade and they will pop open. Use pliers when closing them to make sure the metal prongs bite into the wire.
Recommended Products
$11.27
$ 5 .99 $5.99