Your cart is empty.
Your cart is empty. BOJACK High-Quality Organic Type Thermal Fuses
Thermal Fuse Characteristics:
It consists of a sliding contact, a spring, and an electrically
nonconductive thermal pellet. Before the thermal fuse is activated,
current flows from the left lead to the sliding contact and through
the metal housing to the right lead. When the external temperature
reaches a predetermined temperature, the organic matter
meltsand the compression spring becomes loose. That is, the
spring expands and the sliding contact is separated from the
left lead. The circuit is opened and the current between the sliding
contact and the left lead is cut off.
Widely used in:Transformers, Electric motors, Electric fans, Hair dryers,
Electric irons, Rice cookers, Copiers, Electric stoves, Chargers,
power taps, Water dispensers, Coffee makers etc.
gohan127
Reviewed in the United States on March 25, 2025
These work great in my Milwaukee soldering iron
Lin W
Reviewed in the United States on March 20, 2025
I only needed one, but who knows? It only took me five minutes to change out the one in my waffle iron and now my waffle iron is as good as new.
Bob Akers
Reviewed in the United States on March 13, 2025
Worked great
sebastian R
Reviewed in the United States on February 13, 2025
Worked done to repair my miuwalkee soldering gun
Amita
Reviewed in the United States on January 5, 2025
Great price, fixed my dehydrater!
Liz
Reviewed in the United States on June 14, 2024
Worked great to fixing dehydrator. Sure cheaper than buying a new machine.
Robert L.
Reviewed in Canada on February 7, 2024
Installée et tout est OK.Attention, ne pas surchauffer la pièce lors de la soudure . La tenir avec linge humide et frais pendant la soudure .
Gary L. Reiter
Reviewed in the United States on November 25, 2024
Worked like a champ!
David
Reviewed in the United States on July 6, 2023
I replaced the open thermal fuse in my Honeywell electric fan with one of these, and it now works perfectly - and I still have 9 fuses left! These fuses have long enough leads to bend as needed, and to solder without overheating the fusible element, although I strongly recommend using a heat sink on the leads when soldering. I made a heat sink by using small alligator clips to hold strips of sheet metal to the leads while soldering the connections.
Recommended Products
