Shopping Cart

Your cart is empty.

Your cart is empty.

Bully CR-007XL Black Finish ABS Plastic Universal Fit Truck Extra Large LED Brake Light Hitch Cover Fits 2' Hitch Receivers for Trucks from Chevy (Chevrolet), Ford, Toyota, GMC, Dodge RAM, Jeep

Free shipping on orders over $29.99

$44.99

$ 23 .99 $23.99

In Stock

About this item

  • Works With Your Brake Lights, Running Lights, Hazard Lamps, And Turn Signals
  • Alerts Other Drivers To Slow Down Or Stop When You Do
  • Cover Slides Into Your 2" Trailer Hitch Receiver
  • Wiring Harness Plugs Into Your Vehicle'S Existing 4-Pole Plug


The Bully Xl Tail And Brake Hitch Light Fits Any Standard 2” Hitch Receiver, Adding Finish And Noticeable Visibility To The Rear Of Your Vehicle When The Hitch Is Not In Use. Fits Any Standard 2” Hitch Receiver And Provides Extra Brake, Turn Signal And Hazard Light Indication.


Marcie Jay
Reviewed in the United States on March 21, 2025
Good product
Client d'
Reviewed in Canada on February 4, 2024
ive been using it for over a year now and it still works perfectly! only down part is i wished the cable was slightly longer to fit better on my truck
Wiliam Budd
Reviewed in the United States on December 15, 2024
For the price, it is great. Plugs right in and works as promised.
George E. Nettles
Reviewed in the United States on November 9, 2024
Worked fine until 2-3 months went by, but one of the three leds went out! Don’t know what to do yet, but not happy with the quality of this item!
Theron V.
Reviewed in the United States on October 22, 2024
EASY INSTALLATION
Russell Green
Reviewed in the United States on March 9, 2022
Very happy, this is an excellent extra tail light setup for the trailer hitch.It's not perfect, but it works, the off brand lamps that come with it are a little dim. So, I carefully pry out the red lens and replace the original bulbs with Sylvania 1157 Long Life bulbs.Also, I toss the white gasket behind the lens, I would rather let the lights breath and drain water, and it has been affected by the bulb heat in the past (but I used brighter and hotter Sylvania 1157 Silverstar). I've had a little bit of the black plastic assembly deform from the bulb heat, but it's not visible and it still works fine. Now I drill two 3/16" holes in the back diagonal corners of each light pod to let out any water or heat that may need to escape.The left or right side blinks with the blinkers, and all three bulbs brighten up when I hit the brakes.My hitch sits kinda low, and I've destroyed this tail light assembly a couple times grinding it on the asphalt if there's a steep slope, but I quickly buy a replacement because I like having the extra tail lights. This is the best assembly I've found on the market, it's not perfect but it works and I will always repurchase this one...
Alain St Arnaud
Reviewed in Canada on November 6, 2021
good but should be able to pass the wire in the hith place
Robert O.
Reviewed in Canada on October 3, 2021
As other reviews have stated, this has traditional automotive bulbs instead of the LEDs they claim. However, I found it's plenty bright as is, so that wasn't a big issue for me. It nearly resembles LED, and looks great next to existing LED taillamps.Extremely durable, I am reordering as mine took an impact from another vehicle rear-ending my truck and only the red lens busted. ABS plastic will stand up to daily use and perhaps light impacts.Remember to use dielectric grease on the electrical connections to avoid corrosion!
Customer
Reviewed in Canada on January 10, 2021
This is the second one we have bought and its good to cover the hitch and get an extra bite of safety with the light.
Kelvin M.
Reviewed in Canada on May 1, 2020
The media could not be loaded.
Sandy
Reviewed in the United States on October 20, 2014
Update 4/10/15: One of the lights had been burned out for a while and it took me some time to get around to replacing it, which I did today. Upon installing the new bulb and performing a function check, I realize that it doesn't do anything expect light up when the lights are on. It doesn't get brighter when the brakes are depressed and no turn signals. I removed the bulb and same thing. I suspect that it hasn't worked properly for a while now like several other reviews that said it quit working after a couple of months. Seems to be the case with me too. I really liked it when it worked, it just didn't work for long.Original Review:The light installs easily, I like that it mirrors my tail lights: running lights when my my headlights are on, brake lights and turn signals. It is plenty bright an gives me added sense of security that people behind me have a better chance of seeing when I am slowing down, stopping or turning. It uses incandescent bulbs, not LEDs, sadly. One feature I'd love to see added to this product, in addition to LED bulbs is a ring of clear LEDs for additional backup lights.One major unavoidable con, it sticks out well beyond my bumper (2013 Jeep Grand Cherokee) so if anyone taps my bumper for any reason, this light will likely get wrecked since it is all plastic. Even if it had a metal housing, the lens would still break. It's not really a flaw of the product because of my hitch sits so far back but if you're prone to getting love tapped in parking lots, I doubt the light will survive long.Bottom line: I like it and would recommend it to others.
Robert M
Reviewed in the United States on July 8, 2013
Pros - Plugs right in to 4 pin, fits the class 3 4 hitch perfectly, works exactly as all the lights on my CRV, at night very visible, after wrapping the wires around the hitch they tuck nicely under the bumper.Cons - Not very bright, does not look like the bulbs are replaceable, least I could not see how to get them out, not LED mad to look like it but just a blub, you have to wrap the wires around the hitch, they should of run it thru the hitch.I would have given it a 5 star except for the fact it is not LED and they way they ran the wires, which should have come out the inside of the part that goes into the hitch.Having a CRV I plugged it up and opened the back door to check if it worked. Course when I did right turn signal it blinked Left. Oh man it is wired wrong. Duh then I just flipped it over, after ranting and raving, and the Right did the Right.It worked flawlessly, with the 4 pin pigtail that is on my SUV. Took it up to a store and got in front of the glass Doors and looked thru the rear view mirror and tested it, during daylight, and could barely see them. Turned on and tested all the lights, and got out of the CRV and went out and looked.Not very bright, but the lights are visible. Looks like they are LED but they are not.After dark they are very visible. I could actually see the reflection of them in the grill of a car behind me.Are they worth it? I would say yes, they add visibility to your vehicle. I would recommend them.I do not get all the negatives unless they have the wrong pig tail for their trailer hookup.
Purple Posie
Reviewed in the United States on March 7, 2013
The Bully Hitch light bar was easy to install and works great (I put a little vaseline on the end of the plug before I connected it. I believe that it makes for a better seal). The Light Bar on Amazon was the best price. I looked and looked and didn't find a lower price. I also, bought it because it had: right & left signal, a stop light, running light, and hazzard lights. Other products I looked at didn't have all the signal features as the Bully Hitch Ligth Bar. I live in a town where we are almost top or the top in "Red Light Runners", not to mention that divers aren't as advanced in their driving skills as drivers in larger cities. I believe that the more lights one can put on their vehicale the better. I can't control other drivers, but I can light up my Tahoe like a "Christmas Tree", so I can be seen better. Anything to help.