Your cart is empty.
Your cart is empty.Product Description
4X NVME M.2 AHCI to PCIE Express 3.0 Gen3 X16 Raid Card VROC Raid0 Hyper Adapter.
1.The product does not support hardware raid, the product only supports the formation of soft raid under win10 system, or the use of other third-party software to build raid.
2.Only supports motherboards with detachable PCIE channels.Control the operation of four disks based on the motherboard PCIE channel,The motherboard without PCIE signal split can only recognize one disk.
3.NVME four-disk design, Stable installation, Can run 4 NVME disks at full speed at the same time.
4.Support 2U server small chassis installation, Built-in multiple sets of high-power DC modules for sustainable and stable work.
5.The innovative design can accommodate four NVMEs on both sides of the half-height chassis, and can support simultaneous operation.
TOTALLY WORKS PERFECTLY
Reviewed in Australia on April 18, 2024
Works great, nothing exiting but the black coating makes it look modern and look great in your build. Strongly recommend this!!
Barry Chase
Reviewed in the United States on February 28, 2023
Best for only has this slot size available Is OK but you lose about half the speed of the NVMe being used.
Bum Man
Reviewed in the United States on February 19, 2023
I was looking forward to this M.2 AHCI to PCI-E Express, it even had a fan to keep both NVME sticks cool. It arrived in pieces with no instructions. That's okay for me, but I know other people would have problems assembling it.The worst part is that there were missing screws. Plus, the screws they did send were not the right size, so they couldn't be used! I was very disappointed and frustrated. Sent it back for a refund. Will purchase from someone else.
Finall
Reviewed in the United States on February 12, 2023
So I found 3 NVME's on ebay for a great price. And my motherboard has two PCIE slots open and an onboard m.2 slot. Happy day. So my fallback position was to buy two PCIE NVME cards (this being one of them) and another PCIE card and if nothing else everybody can live in their own slot and away we go. If I would have known my motherboard doesn't support bifurcation before I bought this Cablecc card, I could have avoided this whole fiasco to begin with and just bought two single cards. The original plan was that I could just mount the two NVME's on this card and the other NVME in the M.2 slot on the motherboard and I'd be a happy camper. The other single NVME card would then just be a spare. BUT after buying this card I stumble on a video under the BuildOrBuy Youtube channel - Don't buy this card he says. So after troubleshooting the hell out of the drives I bought and both cards I came to the same conclusion as BuildOrBuy - don't buy this card. It was the problem from the start. It won't work with even a single NVME. Why not??? It's a simple pass-through to the PCIE port and this product can't even get that right. Shame on you little Cablecc card. You're a product of bad design, ugly marketing and outright lies. Maybe someday you can be melted down and turned into something useful. Until then, you are doomed to a life of no honor. I know it's not your fault, but well, there you have it.
Cloud (Brian)
Reviewed in the United States on September 17, 2022
Most Motherboards come with NVME slots now…
Customer
Reviewed in Germany on July 16, 2021
super ok ...just use them
juan m.
Reviewed in Spain on June 14, 2021
Funcionaba muy bien pero como mi placa no arranca desde m.2 lo tuve que devolver. Tambien mi caja es mini y el anclaje era mas grande que la caja.
Heather
Reviewed in the United States on December 6, 2021
I purchased this card based on it's photo, rather than the description, which as noted by others is incorrect. The card is in fact a x1 PCIe interface, which is exactly what I needed.I have a Kingston 256GB nvme drive plugged into it, and am using it as the boot drive on my Ryzen 3 1200 system which uses a MSI A320 based motherboard.The card is certainly worth the value, and is a recommended purchase.
Destroyer2433
Reviewed in the United States on November 16, 2021
This was the cheapest x16 I found but as normal you get what tou pay for.
A guy who bought this..
Reviewed in the United States on October 18, 2021
Works as one would hope assuming your motherboard and CPU support bifurcation. The M.2 mounting is less standard, but it works. Confirmed with x470 and 5600x. Without bifurcation support you'll only see the first drive. Best cost 2 drive bifurcation card around so far.
208JeD
Reviewed in the United States on January 28, 2021
As someone else pointed out, these are NOT PCIE x4. I didn’t realize that before ordering. But I’m fairly happy with the results.Used one to upgrade my daughter’s PC with an additional 1 TB storage (ADATA Falcon). And I used a second one to upgrade my system (another Falcon 1 TB). If you have an old computer (mine is i5 2500K) without M.2 slot, there are ways to hack your BIOS and be able to boot used a PCIE adapter like this one and an M.2 NVMe drive (google “NVMe support an AMI UEFI BIOS” but there are dangers... read the whole guide!!).On older PCIE 2.0 motherboards and x1 slot, you will not see huge improvement over SATA III (6 Gb) — there’s a bit of a trade off. Maybe I’ll update with pictures of HDD benchmarks later.But I’ve ordered a real x4 card (looks like full x16, but we’ll see). So my new boot drive within fly!!
Anatoli N
Reviewed in Italy on January 12, 2021
Il prodotto pare che funzioni perfettamente e il mio sistema riesce ad identificare correttamente i dischi NVMe.È molto utile però avere la compatibilità per il PCIE Bifurcation per poter vedere anche singolarmente ogni disco.Ottimo prodotto e meno costoso dell'Asus HYPER M. 2 X16 CARD!
Emilio
Reviewed in Spain on August 26, 2019
Algo lento para lo que lo quiero.
Recommended Products
$39.99
$ 16 .99 $16.99
$79.00
$ 33 .99 $33.99