Shopping Cart

Your cart is empty.

Your cart is empty.

DR55B01 DC Motor forward/Reverse Controller Board, Self Locking Reverse Polarity Relay Motor Control Module (DC 6-24V)

4.4 (5) Write Review
Free shipping on orders over $29.99

$10.44

$ 5 .99 $5.99

In Stock
  • 【Principle of 】 The CW/CCW controller module is a self-locking (bistable) reverse polarity relay. once, output reverse polarity (and hold), again, output = input (and hold).
  • 【Forward/Reverse Control】 The CW CCW reversible switch can be controlled in forward and reverse directions (start and stop are controlled by power-on and power-off). Module working current: 2MA forward, 35-40MA reverse.
  • 【Way to Control】 The DC 5V-36V motor speed controller is made of high-quality electronic components, with stable and performance, low pulse control mode, and more convenient use.
  • 【Optional Input Voltage】 The dc motor controller has two optional input voltages: DC 5V (5V version), DC 6-24V (12V version).
  • 【Indicator Light】 DC motor speed control with power indicator and reverse polarity indicator. The size is about 43 x 21 x 16 mm / 1.7 x 0.8 x 0.6 inches.


Product Description

1013200010212-1

DR55B01 DC Motor Forward/Reverse Controller Board, Self-Locking Reverse Polarity Relay Motor Control Module (DC 6-24V)

YT

Principle of The CW/CCW controller module is a self-locking (bistable) reverse polarity relay. Trigger once, output reverse polarity (and hold), trigger again, output = input (and hold).

Way to Control The DC 5V-36V motor speed controller is made of high-quality electronic components, with stable and reliable performance, low pulse control mode, and more convenient use.

Optional Input Voltage The dc motor controller has two optional input voltages: DC 5V (5V version), DC 6-24V (12V version).

1

1013200010212-2

1013200010212-3


Specification:

Item Type: CW/CCW Controller Module

Module working current: forward 2MA, reverse 35-40MA

Load current: maximum. 2A (motor With power indicator and reverse polarity indicator

Control mode: low pulse control

Size: Approx. 43 x 21 x 16mm / 1.7 x 0.8 x 0.6in

Weight: 13.5 g / 0.5 oz(approx.)

Pin description:

I +: power input +;

O +: power output + (The output in reverse polarity is-);

O-: power output-(The output in reverse polarity is +);

G: trigger signal ground;

T: trigger signal input (0.2-2 seconds low pulse).

Instructions:

1 After power on, output = input, press the trigger button, reverse polarity output, trigger the button again, output = input, third trigger button, reverse polarity output. And so on.

2 Turn off the power and stop the output.

packing list:

1 x CW/CCW Controller Module

Notice:

1. For the module to work stably, be sure to use a power supply that is twice the load power. If the load is a motor, use a power source with more than 3 times the power.

2. The maximum load current is 2A. If it is a load motor, the maximum load current is 1A.

3. The module can only control forward and reverse (start and stop are controlled by power on and power off)


John Anderson
Reviewed in the United States on February 7, 2024
Very affordable and easy to use with 12v input and able to control a DC motor forward and reverse.
Customer
Reviewed in the United States on April 6, 2024
Pressing the button to switch from forward to reverse works every time. Reverse-to-forward however frequently fails. The relay clicks twice and continues in the same direction. In an automated system, this is unacceptable.
Ghost Rider
Reviewed in the United States on October 30, 2023
When I first started using this module, I thought it was unreliable. However, what I found out was that you have to use the proper power supply to get stability. So, if you're trying to control a 12V motor, you'll need a 24-36V power source. For any other load, you'll need twice the load value. So, a 6V load requires a 12V power supply. Then it runs buttery smooth.All-in-all, a cool little module
Sarah
Reviewed in the United States on October 18, 2023
I love the idea of a prebuilt board to toggle my actuator up and down. Unfortunately, during bench testing this board has not been consistent enough to put into action. As described, the first button push toggled a change of state. The 2nd push toggled a change again, as described. However over the course of several periodic button tests, the board responded very inconsistently. Each time, the board flashes at press, as if it receives the input, however it would not ALWAYS changed state.
Shrek Ogre
Reviewed in the United States on November 23, 2021
I like the board, simple and effective to control a motor forward and reverse. This relay toggles output between +12v and -12v with alternating triggers from a separate timer module. The output connects to a tiny linear actuator to open/close a chicken coop door. But after just a few days of use, the relay now only produces +12v and 0v. The door closes but won't open. Perhaps the door motor consumed more than the 2 Amp this item is rated for. I am replacing this with a standalone 12V 5A 8 pin DPDT relay which I hope will be more durable.