Your cart is empty.
Your cart is empty.EPOXY is a SUPER GLOSS , clear polymer that is used for coating wood, veneer, metal, stone, painted surfaces, table tops and many other surfaces to give rich super gloss look and protect from scratching and air humidity. Surfaces coated with this product very durable, water resistant and easy to care. 1 Gallon kit of Epoxy contains two parts: resin ( 1/2 gal ) and hardener ( 1/2 gal ) which are mixed together at a 1 to 1 ratio by volume. Work time is 30-35 min. Detailed instruction included with each kit.
Mrs. R.
Reviewed in the United States on April 30, 2023
I am extremely pleased with this product! I use it for my epoxy tumblers and the self leveling is downright amazing. It also has super, super high gloss. HOWEVER, I would never in a million years say that it is odorless. If you have any sort of sensitivity I would recommend still wearing protective breathing gear. With the results I got I will still buy in the future, but claiming it is odorless is not true.
Copus Christi
Reviewed in the United States on September 17, 2020
I was a bit worried that this epoxy resin was so inexpensive that it'd yellow or have some other major issue, but it's awesome. I like it more than the other brands I've tried (dr crafty, unicorn art, I'm forgetting the others names)I've used it to make 3 tiered trays and dominos- so smaller items. I was initially concerned by the amount of bubbles, but after a few passes with a heat gun, they all disappeared.My projects all dried in less than 24 hrs, and were all uniform and even.I'm ordering more without a doubt
severdog
Reviewed in the United States on November 30, 2020
I'm used to reading product instructions written in Chinglish, where you get just enough of an idea on how to use or assemble the product, if you're good. Not so with this epoxy resin kit. The attached instructions were VERY thorough and correctly anticipated every challenge that I ran into. The product itself is great, worked fine, but let's face it, resin is resin. It's much more about how you use it and prep the surface, and a great set of instructions really goes a long way.. I added black ink from another provider and came out with a pretty cool-looking desktop. Will definitely consider these guys for next epoxy resin project.
Jeremy Zaucha
Reviewed in the United States on August 6, 2019
I made cornhole boards with LED light strips embedded under resin. Never did anything like this before and it came out beautifully. Follow the directions and it's foolproof. Two things to remember: this stuff is LIQUID and will find a way through any little gap you allow. 2nd, this stuff is LIQUID and will settle level with gravity. Obvious, yes. But both still got me. I routered channels into the boards, secured the light strips, and built forms around the edges. I mixed the resin and added pearl powder for a really cool effect although it didn't diffuse the light as much as I expected. I poured several layers only because it kept leaking, then after all the painting and tons of sanding was done I poured a thin layer across the entire surface. Sand, then many layers of polyurethane for UV protection. The boards are beautiful, durable, and heavy as hell. They also play cornhole perfectly.
Randell Garrett
Reviewed in the United States on June 27, 2019
New to casting resin this is the first resin I have used so I don't have anything to compare it to but like the product was easy to use and came packaged well and as for being a beginner the price was good so you are not out a ton of money if you mess something up
Joseph
Reviewed in the United States on December 25, 2019
This 2 part epoxy is exceptional. Easy to use, takes a little bit long to dry but when it is all set up the end result is good. There his only one small flaw 2 the final coat of the product seems to leave some kind of smokey like lines barely visible until you look at it sideways. But other than that I would definitely use this product again.
Kristen Hudson
Reviewed in the United States on October 23, 2019
Worked beautifully, it's really clear, and easily takes pigment. Pours nicely, but when they say 30 minute work window, it's exactly a 30 minute work window. Lesson learned. Next time, I will have extra things to epoxy with any that's left over at the ready. I'm going to purchase more. Beware though, it's the stickiest stuff I've ever worked with. Be prepared for that too. Lots of extra rags and wear old clothes. I kinda made a mess of myself the first time I used it. 🙂
K. O
Reviewed in the United States on August 7, 2017
Well its amazing stuff. I wasted 16 oz of it by using the drill with a paint stirrer method. Something about using only a low speed drill would have been nice to know it set great and was foamy white because using a 1 speed drill. Was not a good idea. My bad.But the second batch turned out great.Also note that using a sponge brush is not a good idea either! Tiny air bubbles !I would recomend using clean tonge depressor or popcycle sticks if you are need to push the epoxy under or around certain objects that you want imbedded into the resin on the 1st and second coats. But that is for what I used it. It may not be the best for your particular application useage.
Recommended Products
