Your cart is empty.
Your cart is empty.Weeds can accumulate on your ladder almost overnight, for slippery, slimy times. Flip your ladder out of the water when it's not in use for a more pleasant, safer boarding experience. Flip up dock ladder is made of welded aluminum for a 300 lbs. capacity. Robust 21" width for comfort. The flip-up design offers the convenience of a permanently mounted ladder that can be easily removed from the water. Quick, simple assembly using common hand tools. Safe for use in freshwater applications; oxidation may occur in brackish and saltwater. Due to the wide variety of surfaces to which the ladder may be mounted, mounting hardware is not included. Ladder contains four mounting holes requiring 1/2" or 12 mm hardware.
teresa burton
Reviewed in the United States on July 3, 2024
The ladder instructions are good. It assembles easily.It is very sturdy and solid. I highly recommend this product!
buildersRus
Reviewed in the United States on May 14, 2024
The ladder is very sturdy and easy to install. My only gripe is that the ladder rungs are a little bit too small for older adults like me. The rungs hurt my feet when climbing on it. They are a bit too narrow. Small kids or young adults will probably be okay. My old ladder had wider rungs and were a lot more comfortable.
Customer
Reviewed in the United States on March 13, 2024
Good product, looks good, works good, and easy to install
BONNIE
Reviewed in the United States on November 3, 2024
I love this ladder! It's been on our dock for several years and is as good as new. It's easy to pull up & lock into place when we're done using it to keep it cleaner for the next time!
brent
Reviewed in Canada on November 16, 2024
Two years of use and still working great.
JG on the Bay
Reviewed in the United States on February 20, 2023
Good price for a well-made dock ladder. Easy assembly and installation - just make certain the support brackets are parallel. If out of square by over about 1/8", the pin is hard to remove/replace.Only small complaint is that when the ladder is up, the bottom side of the rungs fills with water. Probably no long-term ill effect, but who knows?
Fred M
Reviewed in the United States on September 10, 2021
We have a house on the coast and wanted to replace an existing 3 step Extreme Max flip up dock ladder with a 5 step version. We were very happy with the 3 step version and many of our neighbors have the 4 or 5 step versions which we have climbed and which are sturdy, flip up smoothly, and are quite resilient to salt water with proper care. When the product arrived, we noticed one of the railings was slightly rotated from an improper weld or bolt, and need to be mounted askew on top of the dock for the steps to be parallel to the side of the dock. I emailed Extreme Max customer service, and they responded within the hour and offered to visually inspect a replacement and send it immediately. Our correspondence was very cordial and to the point, and a replacement was sent within 3 hours of my initial contact. I highly recommend Extreme Max ladders but am also incredibly impressed with their customer service which is so rare these days.
Mike Desgagne
Reviewed in Canada on July 23, 2021
The only problem I came across was the hole to lock the ladder didn’t line up properly when in the up position.
Andy Larson
Reviewed in Canada on July 17, 2021
This ladder was a amazing addition to my above ground pool deck. Extremely sturdy and easy to lift up when not using
Michael Purcell
Reviewed in Canada on August 21, 2020
This was a replacement for an existing ladder that got trashed by ice last winter. This ladder was EASY to install and very heavy, especially in comparison to my old one. This should last forever if it lives up to its build quality.
usmc82
Reviewed in the United States on August 10, 2019
I used this on an EZ-dock rather than buy one of their expensive proprietary ladders. I built an adapter plate of high-quality plywood, coated with marine polyurethane and attached to the dock's cleat fittings and accessory pockets. This ladder is easy to assemble, is well-built with consistent welds at all the seams. It is very sturdy in both the up and down positions. It easily handles my weight (230#), yet is also suited for small children with wide, flat rungs and a solid arch to grab onto. Being able to keep the ladder out of the water when not in use avoids marine growth and keeps it looking good, yet the mechanism is simple and solid. Overall, I am very satisfied with this solution.
BDP
Reviewed in the United States on June 30, 2019
I am sure this ladder will provide long service given the welded aluminum is robust. I live in an area where Metric hardware (M8-6 nuts, bolts, fiber nuts) virtually impossible to find. You can order 2 to 4 bolts and nuts online from any source I know. Thus being an engineer I just used SAE alternative hardware in stainless steel and or zink coated.For M8 try 5/16"X 3" works fine for the attachment of the hand rail to mounting plate (Extrememax's terminology reference their installation instructions.)For M6 use 1/4 20 X 2 1/2" for attachment of the hand rail to the step section. I was able to find countersunk heads which fit flush.You will have access threads on both the 5/16" and 1/4 20 after securing your fiber nuts. Leave them alone or Dremel them flush with a cut off wheel. I am leaving mine as is for the moment to see if I need to re-tighten.I plan to add another lock up pin to the other side of the hand rail as I get some very strong winds where I live.This is a quality piece and I was aware from reading the write ups that no hardware is provided. This is a shame as many of us don't have access to a true hardware store for metric. Forget ACE, Lowe's HD they do not carry it. I used HD to obtain SAE equivalents. I put the cross reference in this post to hopefully aid someone planning to install this. It is very simple to install and I hope the hardware reference with lengths helps someone not have to figure this out themselves. I didn't include hardware suggestions regarding attaching the mount to the dock or where you plan to use it as there is too much variability. I used a large stainless steel lag bolt with washer into my front 2X6 that my synthetic deck boards are attached and 1/4 20 with washers and fiber nut for rear attachment to my synthetic decking.
Customer
Reviewed in Canada on June 15, 2019
The ladder is well built and better than expected. The ladder comes with all hardware except bolts for attaching to the dock. WOuld recommend this product
Recommended Products
