Your cart is empty.
Your cart is empty.Product Description
Super Thin X Turbo Teeth
Super thin X teeth turbo design not only provides faster and smooth cuts, but also ensures chip fee cuts with less dust and longer working life.
High-Strength Steel Material
The tile saw blades selection of high strength alloy steel material, strong toughness, improve the cutting speed, enhance material cutting.
Smooth Cutting
The diamond blade is designed for extremely smooth cutting porcelain tile, ceramics tile.
It will be a good partner for general homemade DIYers.
Reinforced Ring Core
Both sides of blades contain reinforced ring core, thicker center to ensure continues cutting, avoid vibration and wobbling, enhance the stability.
Matthew V.
Reviewed in the United States on February 16, 2025
Very good, just use a damp sponge along the blade to cool it other than that these have been fantastic for me
M Silcott
Reviewed in the United States on February 1, 2025
Cuts like a dull spoon. Move on and buy a different blade. These cuts are with an almost new blade on new Rigid saw.
Dmahr81
Reviewed in the United States on January 9, 2025
Used this for my wet saw. Cuts great and does it's job.
Cruz M.
Reviewed in the United States on November 13, 2024
Cuts really good but does chip porcelain tile I was promised a replacement but never received it's beens months haven't used it since.
G. A. P.
Reviewed in the United States on April 23, 2024
Worked great to cut porcelain tile. It doesn't replace a wet tile saw because the edges of the cut are a little rough and a few chips. But for what I needed it did the job.
RPhotographic - Florida
Reviewed in the United States on August 20, 2023
These blades are superb! Used to cut 2" thick Spanish Quartz vanity counter top. The quartz is quite brittle and can crack easily and it's quite expensive as well. Two 24" cuts were made to trim each end of the counter top. A 6" Rigid battery operated circular saw was used and I converted it into a wet saw by adding a length of 1/4" tubing to a water spigot and attached the other end to the saw in front of the blade. With a very small stream of water running the cuts were made. The blade cut the quartz flawlessly, no vibration, no difficulty at all. The blades performed perfectly and the new cuts were better than the factory cuts. The edges cuts are silky smooth, no chipping of any kind, perfect cuts. Excellent blades and a fantastic value. Blades come with two washers to size the blade to fit different saw arbors. Needless to say, DO NOT use an electric saw with water. Only use a battery operated saw.
Brian
Reviewed in the United States on April 30, 2023
Anyone working with exterior 20mm thk porcelain pavers knows that it is not the easiest to cut. My project involved 24x24" pavers with lots of rip and post notches.I tried a few different brand blades in the sub $50 to cut my 20mm porcelain tile project using my hand circular saw. The results were fail right out of the box to failure after about 2 or 3 24" passes (failure meaning poor cutting, heavy blade load leading to cracking and overall hard cut, basically feels like a dull blade).THESE blades did so much better than anything else I tried. Each blade lasted about 10 24" rip cuts. The cutting action was more aggressive (more dust, even with slight water drip on my hand saw), however there were no chips. A very clean cut and one of the only blades that seemed to keep transfer heat manageable so the tile did not crack. For the price I would highly recommend.
Jarinna Melo
Reviewed in the United States on August 3, 2022
Excellent price but with low durability. Using every day I had to change in 2 weeks
Recommended Products