Your cart is empty.
Your cart is empty.Product Description
Usage
- soft copper wire Φ1.5mm ( 16 AWG )
- Material: Advanced carbon steel
- soft aluminum wire 1.5mm ( 16 AWG )
- 3D printing filament Φ1.5 mm
- plastic 2 mm
- Iron wire Φ1mm
BLEDS-8019 5" Flush Plier Cutter
BLEDS WIRE CUTTERS - The Professional And Easy-to-use Wire Flush Cutters You Need
- Suitable for cutting wire, electronic feet, trimming plastic products, cutting small metal wire, repairing of electronics industry, jewelry processing, model making and so on. CANNOT CUT STEEL WIRE.
Product Advantages
- Wire cutter made from high quality carbon steel, It It is ultra sharp and strong. Suitable for electricians, and various daily cutting use.
- Designed according to ergonomics, it has a super comfortable hand feeling, is easy to use, saves effort, and improves efficiency.
Ultra Sharp
- Extra-Long Sharp Cutting Edge, will meet most of your cutting needs.
High-quality Materials
- Forged with high hardness chromium vanadium tool steel, after repeated quenching and heat treatment and precision grinding bevel head.
Profession Flush Cutters
The jaws of the wire cutters are specially heat-treated, made of high-quality stainless steel, and have an angled head design. CANNOT cut steel wires
Comfortable Design
- Very comfortable engineering size, exquisite, compact and lightweight, reduce fatigue and improve efficiency.
Widely Use
- Suitable for cutting wires, electronic feet, trimming plastic parts Products, cut small metal wires, etc.
Cutting Abilty
- The mouth is flat design, the knife bite is neat and tight, and it made of special steel, can easily cut all kinds of softMetal wire, and iron wire under 1MM.
Alfredo flores
Reviewed in the United States on March 23, 2025
Excelente producto
Stifthold
Reviewed in Germany on September 25, 2024
An sich machte es einen guten Eindruck, aber leider hat es nicht mal ein jahr gehalten, bei relativ seltenem gebrauch. Vielleicht auch nur montagsprodukt erhalten 🤷🏻♂️
Jason Smith
Reviewed in the United States on December 28, 2024
Absolutely a must for cutting metal puzzles. Great price and sharp and longevity is good
Nian
Reviewed in the United Kingdom on October 24, 2023
Using it mostly for prints made with resin printer. Works flawlessly, I use it after cleaning the prints with IPA - which you should do too other pliers get with resin everywhere and it's getting messy.
subpixel46
Reviewed in Saudi Arabia on September 1, 2022
Do not attempt to cut G.I. wires. As it will surely break it. Will not cut even the 14 AWG. So be cautious on what you are cutting. This will only be good for cutting small plastic zip ties.
yvan angers
Reviewed in Canada on August 19, 2021
Les pinces sont déjà désalignées après environ 1 mois d'usage à faire du modélisme. Très déçu d'avoir gaspillé mon argent
Rob
Reviewed in Canada on June 17, 2021
These are great the feel good in my hand. They cut really well and so far they have done the job.
Patrick Mollohan
Reviewed in the United States on March 24, 2021
The BS-8109 Wire Cutter Pliers by BLEDS is surprisingly well-made for the price. I didn't expect much from them, but they did exceed my expectations. For testing, I set up various projects and used the wire cutters over the course of a week.I first used the flush cutters to trim standard nylon zip-ties while redoing the cable management on my desktop. The flush cutters were able to trim off the excess strap close to the head so that no sharp edges protrude. The cutter is small enough that I didn't have to worry about my cables accidentally falling into the path of the blades and being cut by mistake, but large enough to easily trim the thicker cable ties I used. The size and angles of the cutter was also perfect for when I trimmed the zip ties in my 3D printer, where I had less space to work with.The second test was on a series of over 300 soldered leads across a few electronics projects of mine. I did have to squeeze the handle of the cutter a bit more than I did with the cable ties, but that is to be expected when cutting through metal versus cutting through nylon. I did begin to notice my hand cramping after about a third of the way through, but it was a lot of work all at once, and I am happy to report that the cutters were able to trim the leads incredibly close to the PCB. There is also no visible wear on the blades as I expected there would be, but I do feel like they would wear in time. This test showed that the blades on the BLEDS flush cutter are pretty durable, but the product could use a more ergonomic handle design to reduce hand cramping.Finally, I used the cutter for 3D printing. As I mentioned previously, I did snip the zip ties of my printer, which is now more professional looking, but I found the cutters to be equally as useful for other tasks when 3D printing. For instance, trimming previously heated ends of PLA and ABS filament is easy and leaves a precise cut, ensuring easier filament loading and extrusion. The flush cutters came in handy when dealing with the supports for uncured resin prints, allowing me to safely remove the supports without damaging the more delicate parts like I could have if I ripped the supports off with my hands. I also used the cutters to help remove a very stuck support on one of my PLA prints. Although I did still struggle with getting that support fully off, the BLEDS flush cutter was able to get in between the print and support and safely separated the two without damaging the surface of the print.Overall, my week of testing has shown the BS-8109 Wire Cutter Pliers by BLEDS to be really good for the price. They could use a better grip and I do feel they will wear with continued usage, but I was pleasantly surprised with how well they handled what I threw at them. Worth picking up if you are in need of an affordable flush cutter.
Vu Le
Reviewed in the United States on March 14, 2021
I received these cutters in exchange for an honest review. Amazon shipped them in a padded envelope instead of a box so the cutters came out of their clam shell container, but luckily there was no damage.I do a lot of 3d printing and DIY electronics, so these cutters are good for cutting filament and copper wires. I have used them to clean up and remove supports from my prints. Small enough to get into tight space and on the really little details, providing good control and flush cuts. They also seem to work well on detailed paper craft projects, which not all cutters can do. They're not rated for steel wire though, so be careful with any hard material or thicker gauge. copper Hopefully these will hold up over time, but even if they don't the price is affordable enough to just buy a new one if one ever wears out.The handle and spring tension are good too, very comfortable to use. When fully squeezed, everything is in alignment with no gaps and very sharp, so overall, I'm pretty happy.
Dennis Eppley
Reviewed in the United States on September 2, 2020
Received the cutters and decided to run them through a variety of things to see how they work. They will be mainly used in 3d printing area. Cut through filament like butter just as you would expect them too. I tried various scraps of wire I have laying around and they cut cleanly and easily. I feel the handles could be a little rounder for comfort but they are not bad at all to use. Good match up on the cutting edges and nice firm spring for tension. All and all a nice pair of cutters for the price
Robert Oteri
Reviewed in the United States on May 29, 2020
I use these cutters for 3D Printing... A lot. I've been using them for about 4 days now, and they are holding up really well to the abuse I put them through.Pros:VERY sharp... Be careful.The points of these cutters are very narrow, which allows me to get into very small spaces to trim parts, and that makes my life easier.The handle has some contour to it, and they are more comfortable then most other cutters I've used.The price. Very reasonable price. I will be ordering more of these for sure.Cons:None yet! I will update my review if something happens.Conclusion:Order these. They are inexpensive, very sharp, very narrow, and comfortable to use. If you're like me and use this type of cutter often, then you know those are the most important things in a cutter.
dan l athanasaw jr.
Reviewed in the United States on March 31, 2020
These are good cutters. I use them for both 3D printed, resin and PLA, along with hobby plastics. They are sharp and have I nice angle to get into close sprues. They are constructed very well with more sturdy materials than I am used to getting at this price. The spring mechanism was perfect tension for my needs and handling was comfortable. Everything cut cleanly. ***Warning*** do not use on paperclips or hard metals. This was my mistake and it will damage these blades. These were delivered very quickly, standard packaging and are just as described in the listing. I am very pleased with these and will be purchasing again.
Joy
Reviewed in the United States on February 3, 2020
I will start by saying I was reimbursed for the cost of the clippers, which does not taint my review.Overall I'm very happy with these clippers. They have worked very nicely for everything I have used them for. Have trimmed and clipped lots of wire while building a 3D printer as well as clipped thin pieces of metal and trimmed plastic while working on scale models, and the clippers have done it all very nicely with no problems. Everything was cut very cleanly, leaving a nice finish cut. Trimming plastic parts for a model yielded a nice surface that just required some light sanding to finish clean up.These appear to be very similar to clippers available at a certain hobby/craft store that I will refrain from naming (Hobby Lobby), they work as well, or better, and are cheaper. I would definitely recommend these clippers.
Recommended Products