Your cart is empty.
Your cart is empty.From the manufacturer
Whether you're a beginner or experienced reloader, Frankford Arsenal offers all the tools and reloading equipment you need. From reloading presses, to tumblers and case trimmers, Frankford aims to get both competitive and recreational shooters from the bench to the bullseye by providing the tools to create the most consistent and effective ammunition possible.
Case Trim and Prep Center
The Frankford Arsenal Case Trim and Prep Center houses all the tools you need to trim, chamfer, deburr, and pocket clean. An innovative case holder with adjustable collet and bushing system indexes the case shoulder and can be set to precisely trim brass to an exact length. Built from aluminum and a durable steel frame, the Case Trim and Prep Center is build to be a long-term tool on your reloading bench.
- Adjustable collet system works with all cases from .17 Remington to .460 Weatherby
- Ultra-hard HSS cutters stay sharp for thousands of rounds
- Three output shafts accept all case trimming accessories with 8-32 threads
- VLD inside chamfering tool makes loading easier and prevents damage to bullets
- Each tool runs at the same time so you can take one piece of brass through the entire process with ease
- Includes a heavy duty motor and drive train
- Also available in 240 volt option
Features
Easy Storage
A convenient built in storage box holds spare collets, bushings and tools while they're not in use.
Precise Trimming
Simply insert your brass into the case holder and the high-speed cutter will trim the casting until the shoulder stops on an internal bushing.
Includes:
- Deburr tool
- Chamfer tool
- 3 different sized case body collets
- 6 different sized case shoulder bushings
- 2 different sized primer pocket cleaners
- Case Prep Expansion Kit (SKU 909215) sold separately
Step 1: Trim
Step 2: Chamfer
Step 3: Deburr
Step 4: Pocket Clean
Patrick K Fields
Reviewed in the United States on February 3, 2025
this is truly a game changer! I have been hand reloading for about 8 years now and I can't believe it took me this long to get this wonderful tool. it cut my case prep time in half and easily made the end result very uniform. this is a must have for the serious re-loader.
Austin
Reviewed in the United States on January 24, 2025
Works great so far. I've done a batch of 100 rounds with it. Time will tell if it holds up but it fells well built.
Carracticus
Reviewed in the United Kingdom on October 25, 2023
I should have bought one years ago.Quiet enough to run without annoying the neighbours and powerful enough to get the job done.In the UK this US version runs from my UK 110V site transformer with the correct fly lead and RCD that I already had.
Kunde
Reviewed in Germany on April 12, 2023
gute Leistung und Lieferung angaben sehr gut gerne wieder
Erneide Miranda Pacheco
Reviewed in Brazil on May 13, 2022
Produto de ótima qualidade. Recomendo o vendedor.
Dieselhorses
Reviewed in the United States on June 30, 2021
I've read just about every review for this product. I started with the "1 star" all the way to "5 stars". At the end of the day, and after receiving the FA Platinum case trimmer/prep center just yesterday, I've come to the conclusion that it can be a good, solid and productive addition to my reloading bench! There is no magic, lightning speed method to fully process rifle or pistol brass unless you've won the lottery and can afford industrial equipment.I've already processed a couple hundred 223 cases (trim, chamfer, deburr) with this trimmer. It IS very accurate (so far). The reason I said "so far" is because I've yet to know the longevity of the cutter head. I do know that if a piece of brass needs excessive trimming, I'll push it on the chamfer & deburr attachments for a few seconds and THEN trim. This sounds like it might take more time but actually speeds up AND saves on cutter blades (IMHO). So in right under 3.5 minutes I can process 10 cases which equates to 1000 in right under 6 hours. I can deal with that!Evidently FA must have corrected the "wobbling" or "run out" on these things because every one of the case mouths are pretty dang square. You cannot push too hard but just hard enough to feel the disconnection between the cutter head and case mouth. The ONLY thing I would want to see in future production of this trimmer is to speed the RPM a bit? I will eventually purchase the RCBS carbide 8-32 (3/16) carbide cutter to maximize life. But I'm real happy with this trimmer!
Seymour Butts
Reviewed in Canada on February 17, 2019
If it's in your budget than buy it. The trimmer works great. Measures off the shoulder so you need to ensure all your sizing is uniform but it will trim within 0.005" all day long. Saves a ton of time doing brass prep. I use the rcbs military crimp remover also and it does a great job of removing crimps. Definitely need to replace the cutter head though. The rcbs trim mate cutters fit and they are available in carbide. Worth the extra $50
George
Reviewed in the United States on February 8, 2017
Summary: Works great! Don't be anxious because of a few folks who are bagging on the debur tools. Go ahead and buy it if you are sick of holding a drill and switching off to hand tools for every case.After looking around at multiple tools and owning hand tools and a Lyman E-ZEE trim, I decided to go with this prep system. The other contender was the Hornady case prep center at over double the price and you still had to chuck a case in a shell holder before you could trim. I also considered the worlds finest trimmer, but at over $70 a pop I didn't feel like buying one for each caliber I was working with. With this prep center, you get the ability to setup for A LOT (I won't say all because I haven't tested them all) of bottle neck cartridges. I know the new versions of the worlds finest trimmer are able to be changed out for caliber now too though. So here's the other thing that makes this a bit nicer in my opinion. The case trimmer has a collet set that you can adjust to each case. This does a majority of the holding so the case does not spin. This allows you to avoid a lot of the hand pain associated with trying to keep the case from spinning in some other cutters (I know, I know...work on your hand strength wimp. RESPONSE: Sorry, too busy reloading and having fun shooting to be bothered with that ; ).As for quality and speed, I think it's great for what you are paying. The debur and chamfer tools ran smoothly and did not chatter in any of the 223 cases I was working with. I did about 400 cases over 2 nights working 1.5 hours the first night and 1 hour the second. That puts me at about 22 seconds per case. Keep in mind I was not only trimming and deburring but also checking for military crimps and sorting. Had this not been the case it would have been a bit faster. The machine runs fairly quiet and chugged right along. I'll be curious to see how it holds up after a few hundred hours of use. As for trimming accuracy, I set my case length to 1.750" (Rem 223). I saw variation between 1.750" and 1.748". I'm sure that's an issue for some competition shooters, but for anyone interested in large volume reloading for general use rounds it will work any day. Just make sure to follow directions when setting up and pay attention to which collet and ring you are supposed to use.Conclusion....buy it. You won't be sorry. I plan on using it to prep 223, 308, 30-06, 300 AAC and 243 initially.
Homesteader
Reviewed in Canada on November 29, 2017
Amazing time saver, takes a bit to set up (2 min) when changing calibers and heads. It has cut my time down tremendously. I have done about 1000, .223 brass, 200, .308 brass, 250, 30-30 brass. No issues with supplied cutter head as others have posted. I will confirm, you will need a rubberized garden glove when mass producing brass operations, it just makes it easier. A well thought out, and equipped product that allows me trim multiple calibers of necked brass.
Colorado Consumer
Reviewed in the United States on April 12, 2016
This is a fantastic item for trimming rifle brass. It's so much faster and more efficient than a traditional mini-lathe style trimmer. I use it to convert .223 Remington and 5.56mm NATO into 300 AAC Blackout. A couple of other tools are needed to make it happen, but this gets the final length exactly where I want it.Pros: Heavy, and heavy duty. Even when you're pushing down hard on a casing to get it trimmed up, it doesn't budge. The adjustable foot is also nice to get it angled at a convenient work position. The motor seems plenty powerful enough, it barely bogs down even when pushing hard on an extra-long casing. Setup is very straightforward - I was up and running within 10 minutes of opening the box.Cons: I suppose it could be a bit less expensive. If you're reloading your own ammunition to save costs, then any cost is hard to swallow - it just raises the price per round. But, at the going rate of almost a dollar per round of 300 BLK, this thing should pay for itself quickly.Bottom line: I would absolutely recommend this to anyone who reloads rifle brass. Since rife brass tends to stretch a bit over time, it's important to keep it trimmed to proper length anyway. But if you're going to convert bulk brass and need a way to get your final cut, bevel and chamfer done, this is the machine to do it.
Recommended Products