Your cart is empty.
Your cart is empty.Jandy Replacement Parts: Zodiac Jandy R0013200 Heater Pressure Switch, 2 PSI. (Fits Many Heater Models). Part Number: R0013200.
Texas Gal
Reviewed in the United States on March 11, 2023
This is the same part number as I needed for my Laars LD325P heater, but does not look like the part that it is replacing. The hole for the water tube is too small to insert the tube, so it cannot be connected. It also has a knob for changing the pressure setting, so it is not the 2 psi part that I need and ordered. I don't think this is a replacement for the Laars part number R0013200 as it says.
Carl Hallquist
Reviewed in the United States on January 11, 2023
Used to replace old switch in Jandy pool heater. Worked great all summer expect it to work many more years.
Fix it
Reviewed in the United States on June 5, 2022
Used this to replace a 17 year old original pressure switch. I used 2 cc of SAE 30 oil, wired it up and used Teflon tape on the fitting. While I was in the heater I took time to remove all the spade plug connectors and cleaned the terminals of corrosion using a flat file and 300 grit sandpaper. The terminals get oxidized over time and increase resistance at the connections. Take pics of the wires if unsure where to reconnect before you do that though. Overall job took an hour to do which included backwashing my filter element. I also checked the high limit switches to make sure they were ok. A multimeter comes in handy. This saved me hundreds!! Was facing $3500 installed for a newer JXI model.
Customer
Reviewed in Canada on July 9, 2021
Pressure switch functions as expected. Good price fast shipping! Reccomend buying from here.
Chris
Reviewed in Canada on June 4, 2020
Used to replace the original pressure switch on my Laars Lite swimming pool heater. Installed in seconds and worked perfectly.
Kelly
Reviewed in Canada on October 11, 2019
As promised and easy to install.
Customer
Reviewed in Canada on June 10, 2018
Works fine. Straight forward to replace and install.This version looks very different than the original part on the Laars Lite 2.This one has an ajustement valve on it.
Customer
Reviewed in Canada on July 29, 2016
Although the part didnt fix my issue, it was the right one and was a great price and shipped super fast. Notorious for failing so at least I have a spare.
frank Lombardo
Reviewed in the United States on June 30, 2016
These seem to fail every year or two
LeoP
Reviewed in the United States on September 13, 2014
The water pressure light of my pool heater kept blinking and the heater would not ignite. I bridged the pressure switch by a regular switch just to see if ti would resolve the issue and low and behold it did. Time for a replacement. I found this switch at Amazon and even though it looks quite different from the original, the reviews assured me that it wouldn't be a problem. I ordered and installed it in 10 mins and it works perfectly. I think it's even better than the original since you can adjust the PSI from 2 through 10. I use 2.
Mbsurfcity
Reviewed in the United States on May 16, 2014
Was having a problem with my pool heater and this switch was the culptret, the old one was leaking and no longer fuctional. Was easy to install and fixed my pool heater in a matter of minutes. Anyone can replace one, and plenty how to instructions on line if you really need them.
06champ
Reviewed in the United States on January 7, 2014
I chose this rating because this little item allowed me to have perfect operation of my Teledyne Laars 15 year old propane pool heater that the local gas line expert could not diagnose. After installation of a new propane gas valve for the heater, it still did not function, and I was told the valve was the problem and should be sent back. After internet searching and speaking with a Zodiac representative (new owners of Jandy), a techie friend and I found the old pressure switch to be defective. I purchased this from Amazon, installed it according to printed and Zodiac verbal instructions -- amazing, heater turned right on and has operated without incident since.As others have noted, the item actually sold and delivered is a newer version and not the white ceramic switch pictured here. Apparently the newer Jandy propane pool heaters do not need the oil in the line this switch is to be attached to. Zodiac technicians confirmed my heater needed the oil in the line, and to make sure it was a non-detergent product.
James Sparke
Reviewed in the United States on July 9, 2013
The pressure switch that I received was different than what was on the pool heater and what was showing on the order page and is showing on this email. I installed it and it appears to be working.
Recommended Products
$305.13
$ 99 .00 $99.00