Your cart is empty.
Your cart is empty.John
Reviewed in the United States on February 7, 2025
The media could not be loaded.
J. Wiltse
Reviewed in Canada on August 18, 2024
I purchased several possible solutions to record ProRes video to my IPhone Pro Max 15. This enclosure from JEYi, in terms of its design is truly well conceived, small, light with the USB-C port directly on the enclosure, removing the need for another cable. My huge disappointment came when the card (even with a Sabrent Rocket 2230 NVME ) could not transfer write speeds fast enough for the proRes format. I consistently received the error whereas with other solutions, no issues. Perhaps I received a bad card ? Are others experiencing the same problem ? Thanks for a great design... now to fix the throughput speeds please.
John
Reviewed in the United States on July 27, 2024
Device is a nice size for a 2230 SSD. Unfortunately, the chipset keeps dropping off of my systems after a short period of read/writes. It's fine for a short period, but after about 5 minutes to write, the drive stops responding. I know it is the device enclosure chipset, as I have had zero issues from the SSD while in other enclosures.Also noticed: even though USB-C is supposed to be reversible, this device only seems to work one way. If reversed within the socket, it fails to read. I have a feeling that it's the internal USB-C connections only being on one side of the connector in order to save money. I'm unsure, as this is the only device enclosure from this company that I own.I would consider some other brand, if possible. I will not be buying again. If the manufacturer could step up with their support, that may be helpful. I hope that I only have a defective unit.
Customer
Reviewed in Singapore on July 22, 2024
Unlike a few other options available, this enclosure very importantly does not disconnect when it gets too hot. It instead, correctly throttles the NVME and slows down the file transfers, as it should. Fair warning though, this enclosure wicks heat away from the drive quite quickly and this causes the enclosure to heat up to rather uncomfortable (near-scorching) temperatures.Note: The less than 10Gbps transfer speed was likely more a factor of my computer's USB-C port.
JEFF T.
Reviewed in the United States on March 21, 2024
TL;DR: This is a good enclosure but gets really hot and if you're moving a lot of data all the time rather than more typical uses, it might not be the best choice.Pros:- Compact and well built, feels solid- Easy to assemble- Includes thermal pads- Comes with the ubiquitous cheap Chinese screwdriverCons:- Does not come with instructions, but it's also pretty simple.- Gets quite hot. I got this to back up SD cards with my laptop and under sustained loads of only around 30 MB/sec, the enclosure reached 133 F (56 C). This isn't hot enough to be dangerous to the equipment and there's still headroom, but be wary touching it after sustained data transfers. If you're pushing higher speeds for longer, it might be a bigger problem.I paired this with a 512 GB Sabrent NVMe drive.
mybizcoach
Reviewed in the United States on December 6, 2024
This is a great little m.2 ssd case. The build is very sturdy being made of machined aluminum. Includes heat dissipating thermal pads and a screwdriver as well as a convenient lanyard to attach to the cap. The cap attaches via 2 small magnets. Two locator pins keep the cap from twisting. I'm not really sure why there is a lanyard except for to make it easier to keep track of the cap. The magnets are not strong enough to keep the cap attached if the lanyard were to be attached to a Keychain. But the magnets keep the cap attached if you put it in a drawer or possibly in your pocket. An improved design might include a latch of some sort to keep the two sections from detaching unintentionally.
Christine Zängerle
Reviewed in Germany on December 1, 2024
Ein schönes, edles und kompaktes Gehäuse jedoch habe ich falsch bestellt hatte eine 2242 SSD daher musste ich es leider zurück schicken.
Michael
Reviewed in the United States on November 27, 2024
Great design, zero waste space, easy to install, good heat dissipation, no disconnects at all, never encountered issues. The best option at this price.
RJ Vasquez
Reviewed in the United States on November 27, 2024
The JEYI 2230 Only M.2 Enclosure is quick and simple to assemble, making it a breeze to set up. The best part? No screws are needed for the SSD! It’s a well-thought-out design that works flawlessly, making it a great choice for anyone needing a reliable M.2 enclosure. Highly recommended!
Customer
Reviewed in the United States on October 27, 2024
I’m not very experienced with tech setups, but this JEYI 2230 M.2 Enclosure was super easy to install and use! I bought it to encase my Kingston 1TB M.2 SSD, and it works great. It even comes with the tools to assemble it and some putty to secure the memory, which made the setup super convenient. I love the compact and modern design—it’s not bulky, heavy, or annoying to carry around. Works perfectly with my iPhone 15, and the fast data transfer is a big plus. Highly recommend for anyone looking for a sleek, reliable enclosure!
lacobo
Reviewed in the Netherlands on October 16, 2024
Klein behuizinkje voor M2 2230 SSD's. Ledje is blauwig als het ding staat te wachten en groen als er actie is. De snelheid is prima, +1000 MB read/write, maar twee dingen zijn een beetje jammer: Het magnetische dekseltje om de USB-C connectie af te schermen is net te zwak en de USB-C connectie zelf is zo lang dat de mini-drive altijd een stuk uitsteekt, zie foto.
Xavier Budhali
Reviewed in India on April 4, 2024
Nice productIt works wellGood speedTrusted product
Recommended Products