Your cart is empty.
Your cart is empty.Product Description
SPECS:
- Easy On/Off Operation
- Great for small tables
- Product Weight: 0.9 lbs / 0.4 kg
- Dimensions: 6.9 x 3.9 x 2.1 in / 175.2 x 99 x 53.3 mm
MAGSWITCH UNIVERSAL FEATHERBOARD
8110015
Designed to work on any cast-iron table to hold down your work so you don’t have to. It works on both sides of the blade and even the fence. It features two 20mm Magswitch MagJig 95 magnets.
- Works to improve your cutting results on either side of the blade
- No miter slot limitation
- Perfect for infeed/outfeed applications
- Can be used on the left or right side of the blade
- Precise, fast setup
Technology That Attracts.
Designed to work on any cast-iron fence to hold down your work so you don't have to. It works on both sides of the blade and even the fence. It features two 20 mm Magswitch magnets.
Applications
Magswitch patented technology is very versatile and has applications in numerous industries such as welding, fabrication, woodworking, manufacturing, shipbuilding, automation and robotics.
Products
Magswitch products are engineered and designed to drive productivity, create a safe workplace and reduce downtime and increase speed.
Solutions
We provide solutions to make everyday processes in workplaces faster, easier, safer and efficient.
Customer
Reviewed in the United States on March 8, 2024
This mag switch featherboad is fantastic. The magnets hold like crazy when switched on and release quickly when switched off. Quick to set up and quick to remove from your table saw or router table.
Thos 777
Reviewed in the United States on October 6, 2024
After a bad kickback injured my hand, I bought this. I use it pretty consistently when ripping because it is easy to use. The switchable magnets mean you can stick it to the cabinet of your saw, then turn off the magnets to remove it and place it on your table, then twist the magnet switches and rip. Takes about 4 seconds once you have done it a couple of times. Your hands, stomach, etc. are worth it. Oh, and try to remember to stand outside the line of your sawblade. I knew that, but didn't always remember. I am lucky I did not lose a finger.
Slavko Antolos
Reviewed in the United States on October 23, 2024
It didn’t meet my requirements so I returned it. Well made but my table saw didn’t work with it so I returned it.
RobertM
Reviewed in the United States on November 10, 2023
Got a chance to try one out and realized in less than a minute that I wanted one. I have the style that clamp into the miter slots and while they work they can be cumbersome at times. Plus there have been many times when they would just not reach the stock because of the limitations.Well these magnets really hold this one in place wherever you place it on the cast iron. I purposely put it slightly over the miter slot and it still held great. But for me the bonus is this works even better for my band saw.The unit works so smoothly to engage and disengage the magnets. In fact I can't even tell they have grabbed until I try and move it. I can now Easily and QUICKLY disengage the featherboard, reposition it for the next piece, then continue ripping away. Takes me about 5 seconds. I LOVE THIS THING.
Rex Yiu
Reviewed in Canada on October 17, 2023
Perfect, easy use and holds down really well at work
Jack
Reviewed in Germany on February 2, 2020
Great tool and works as expected.
Mr R
Reviewed in the United Kingdom on June 23, 2019
This is great and really sturdy when the magnets engage. Note magnets, no good for anything other than cast iron or steel. Use this on my table saw more and more now just wish I bought two of them. I did shop around and found this at a good price.
J. T. Smith
Reviewed in the United States on June 23, 2018
I was reluctant to buy this feather board switch because of it's price. While I could see the logic in it's design, I figured that I could easily get by with one of those orange plastic ones that fit into the miter slot or simply make my own. The problem with this is I found myself not using the cheaper miter slot versions for a few reasons:1) The amount of torque you need in order to get the expanding miter bar on those cheap feather boards to securely tighten within the miter slot is outrageous and half the time it still wouldn't properly seat within the slot;2) Adjusting the length after each cut then re-tightening was a pain, literally;3) If the piece I was working with wasn't narrower than my miter slot to the fence then I couldn't use it at all;4) If using a self made feather board, you have to clamp it to your work piece with each cut not making it very convenient.Because of these reasons, I found myself rarely, if ever, using feather boards. Not a safe way to work on your tools. The second I pulled this switch out and set it on my table, without ever making a cut, I fell in love with it. Not only can you use it on either side of the blade but because of this you can also use it on your other tools with a cast iron table such as the bandsaw and jointer with no miter slot required. I was concerned that when the switch is "off" that it still had a magnetic charge but this is not the case. I could not get anything to stick to the magnets while it was off. They obviously use rare earth magnets in these which makes them super strong and hold very firm to the table. Turning the magnets on is very simple and easy to do, no hard turning required and you can feel it lock into place; however, there is no loud "thud" from the magnets engaging the table. The only thing I can think of that could be improved on this would be to make the amount of turning less to engage/disengage the magnets. It takes about a half turn in order to engage/disengage the magnets but this is a small gripe and doesn't take away from it's performance.I have since ran a few boards of maple alongside this feather board and so far it has held my pieces firmly against the fence without budging. The plastic is stiff and heavy duty. Time will tell how long it will all last, or how it holds up to kickback, but this was worth the money. If you're "on the fence" with this purchase don't be. Instead be safe against the fence and get this feather board.
Jose De Mollinedo
Reviewed in Spain on July 18, 2017
Este aparato es enormemente útil para usar en herramientas/máquina que tengan algún tipo de base de hierro. Los imanes con los que actua son increiblente fuertes; su diseño de peine reversible lo hace igualmente versatil.Un complemento para el taller, que aumenta las garantías de deguridad al permitir mantener las manos alejadas de la pieza en la que estamos trabajando.El envío ha sido muy rápido.Lo recomiendo sin lugar a dudas.
Kunkoh
Reviewed in the United States on June 19, 2017
This thing is magic. Twist the little knobs and it's locked onto my table saw top, twist them the other direction and its easy to remove.I was skeptical, growing up most magnets I saw or played with weren't that strong and generally were used on a refrigerator to hold a note which usually read something about needing to clean my room. If the note was too big, the magnet would slide down to the floor. How was this supposed to help hold securely my lumber when I ran it through my table saw? I didn't know, but with all the great reviews and the relatively inexpensive cost I figured I would give it a shot.Magic. That's how. When I lock it down, it does not slide or move at all. Yes,I'm a child at heart and played with it a bit trying to push and twist it.. gotta test it out right? But it worked like a charm holding my boards nice and snug as I ran them one after another through my saw helping me get precise and repeatable cuts! Then when I was done and needed to put it in a different location, twisted the knobs and it popped right off. I'm not sure 5 stars is enough to be honest! It's always so nice when a product doesn't just meet but exceeds expectations.
Cliente
Reviewed in Italy on June 10, 2017
Davvero un ottimo prodotto, io lo ho acquistato con un po' di titubanza, non pensavo che i magneti avessero una buona tenuta sul piano di lavoro in ghisa, e in più mi sembrava un po' costoso come articolo. Mi sono dovuto ricredere, ha una super tenuta. Oggetto consigliato facilita molto il lavoro sia alla sega da banco che sulla tupie, a patto chi i pani di lavoro siano in materiale ferroso (sull'alluminio non si attacca) in oltre è ottimo per evitare infortuni perché evita che il pezzo in lavorazione toni indietro colpendoti.davvero un ottimo prodotto.
woodworker
Reviewed in the United States on February 5, 2017
I made my own feather board to use on my table saw, but rarely took the trouble to put it to use, it took time to clamp in place. This magnetic version seems to be easy to use and works on either side of the blade. I like that it doesn't require a miter slot to position it, so it works with any width stock. The magnets are easy to turn on and off, and are quite strong. Other reviewers have mentioned that it doesn't hold strongly if placed on sawdust, but a spot can easily be blown clean to get a sure grip. One suggestion for improvement- I wish they had designed an eye to hang this from, I like to store my saw accessories hanging on the wall on a nail. This has a number of recesses on the back and it will fit over a nail head, but isn't as secure as it could be. The easier a safety device is to use the more likely it gets used, and this is very easy to use. I like it.
Recommended Products