Your cart is empty.
Your cart is empty.Latrice
Reviewed in the United States on May 31, 2024
used to fix my boat
anthony tobiasz
Reviewed in the United States on January 19, 2024
No Instructions included or a guide to access the intranet for the same.
Mnkygrlsmom
Reviewed in the United States on April 24, 2024
People…. The instructions are right here on the item description.It’s very straight forward how you apply epoxy.Yes - it’s very hard to push through the attachment tube, SO I TOOK THE TUBE OFF AND IT WORKS GREAT.Just put in a small pile and mix it up.Had a crack on both sides of my peddle boat approx 4’ total that was cracked. Only used half the tube to seal it up.Definitely recommended!
Rory
Reviewed in the United States on September 30, 2023
The 2 part syringe and plunger is obviously designed to go into some type of dispensing gum that is not included. Very difficult to do by hand. I set up the body part in my vise and pressing out into a different syringe. Would not buy again.
Customer
Reviewed in the United States on September 26, 2023
It took a day to harden. It was extremely hard to push out of the little cylinders. My husband was pushing and having to used leverage to get it yo trickle out while I was spreading it on. Is this normal? Maybe old stuff? My husband is mechanical inclined and gas done a lot of body work...not with gel coat. Not real happy with the product.
wugubob
Reviewed in the United States on September 22, 2023
Seems to work well except it is very very difficult to pump the epoxy out since the holes and nozzles are so small. This is for the small nozzle. I found it much easier to pump out without using the nozzle.
Paul Z.
Reviewed in the United States on November 9, 2023
Horrible!!Extremely difficult to use. Plunger would not go down with ease! Had to apply alot of pressure to get adheasive to come out of tubes. Don't know how it dryed because I had to travel two hours away after applying it to the repair area??
Steve S.
Reviewed in the United States on November 9, 2023
Bought this kit to repair small chips in my boat, but the product did not work as advertised. I could not push the 2 compounds through the mixing tips that were provided. The plastic push device broke in my hands due to the amount of force applied in attempts to squeeze the compounds out of the tubes. I ended up having to remove the tip, force the compounds out, and mix by hand. Once applied to the repair area, the compounds sat for 2 days, yet still did not harden for sanding and final touch up. I will use other fiberglass repair materials, and would not recommend this stuff.
Recommended Products