Your cart is empty.
Your cart is empty.Product Description
NEEWER Low Profile Ball Head 360 Degree Rotatable Tripod Head for DSLR Cameras Tripods Monopods
NOTE:Please use the low profile ball head within its maximum bearing weight
NOTE: Tighten all knobs when using the low profile ball head
Specifications:
- Material: metal
- Color: black
- Sphere Diameter: 28mm/ 1.1inches
- Bottom Diameter: 42mm/ 1.65inches
- Maximum Height: 68mm/ 2.68inches
- Weight: 197g/ 0.43lbs
- Quick Release Plate: 38*43mm/ 1.1inches*1.69 inches
- Maximum bearing of Quick Release Plate: 44mm
- Maximum Load:5kg/11lb
- Package Contents:1 x Low-Profile Ball Head
Description:
The prefect low profile ball head design create stronger locking force and higher stability. The screw knob is located on the side of the ball instead of the bottom of the ball head bring 15% down the whole center of the gravity of the ball head that can enhance stability
The removable Arca type quick release plate is Equipped with 1/4 screw that is suitable for all SLR cameras and 3/8 screw hole at the bottom can be attached to tripod or monopod
Screw knob can quickly tighten or loosen the ball and allows it to move freely in all directions
The height of the ball head is 68mm/ 2.68inches and its weight is only 197g/ 0.43lbs.It is very easy to carry.
The max load of the ball head can up to 5kg/11lb and the aluminium alloy material makes it strong and durable.
The screw knob is located on the side of the ball instead of the bottom of the ball head bring 15% down the whole center of the gravity of the ball head that can enhance stability
Quick Release Plate: 38*43mm/ 1.1*1.69 inches
Maximum bearing of Quick Release Plate: 44mm
Maximum Load:5kg/11lb
Sphere Diameter: 28mm/ 1.1inches
Bottom Diameter: 42mm/ 1.65inches
Maximum Height: 68mm/ 2.68inches
The screw knob is located on the side of the ball instead of the bottom of the ball head bring 15% down the whole center of the gravity of the ball head that can enhance stability
- Quick Release Plate: 38*43mm/ 1.1*1.69 inches
- Maximum bearing of Quick Release Plate: 44mm
- Maximum Load:5kg/11lb
- Sphere Diameter: 28mm/ 1.1inches
- Bottom Diameter: 42mm/ 1.65inches
- Maximum Height: 68mm/ 2.68inches
Mik R
Reviewed in Australia on April 4, 2024
: Good Price Point: Well Built: Made from good solid materials: The ball & socket work smooth as silk: Other working parts all run nicely: Does exactly what it’s supposed to do, & very smoothly/effortlessly: I’m happy with this buy
Client d'
Reviewed in France on September 4, 2023
Rotule compacte et solide, utilisée sur une petit trépied Zeadio Mini, il supporte sans broncher un Nikon D750 avec grip + Sigma 70-200mm F2.8 sport qui pèse 1,45 kg.
Joe Castellon
Reviewed in the United States on September 27, 2023
I chose this tripod ball for it's low profile. It's about 2/3 the height of the average ball head.It has a single knob for adjusting both the ball head position as well as the base rotation. This makes adjusting it both simple but at the same time, sometimes a bit tricky.I like to use it best with smartphone mounts, though I have also used two of these to put on each end of a camera slider, allowing me to mount the slider on two tripods with freedom to angle it.The build is fantastic. It is by no means a cheap feeling ball head. It is solid as a rock with an excellent, premium feel.
L. Shuler
Reviewed in the United States on October 23, 2023
I'm not sure why, but somehow I thought this would work well for me. I'm used to fluid heads, but that's not what I wanted. This works great if you're going to just set up and shoot, but there is no separate pan setting for it. Every time you reset it, you have to check for level. Neewer does sell a similar one to this that does have a pan setting. I returned this head and got one with a pan.Second issue is a design tradeoff. It's shorter, yes, and that's cool, but it makes the controls harder to get at and they get in the way of the camera, making it harder still to do what you need.
Piu
Reviewed in the United States on July 30, 2022
Everything works great except for the screw on the quick release plate.The screw thread is bigger than the slot, which is expected, so the screw doesn't fall out. But there is no keyhole to put the screw in or out. It is just forcibly screwed through the slot, and if you accidentally unscrew it from the slot when removing a camera, it is very difficult to put it back through the slot.The solution is to drill a slightly bigger hole at one end of the slot so the screw can be put through. Also, it would be better if instead of a screw, it has a finger tightenable ring on it so I don't have to find a coin everytime I need to tighten the screw.
Scott B.
Reviewed in the United States on October 9, 2022
The media could not be loaded.
Steve Hanka
Reviewed in the United States on August 3, 2021
I attached this to a K&F monopod and then to my rather heavy Nikon F6 film camera. It works well with the monopod, allowing me to quickly rotate the camera from a landscape to a porrtrait shooting position.The combination steadys the camera solidly, reducing or eliminating the camera shake I often get with hand-held shots and slow shutter speeds. It is inexpensive and strong. It makes the monopod more versatile by allowing me to rotate the camera from landscape to portrait position.I like it.
Drew Baker
Reviewed in the United States on July 9, 2021
This is the best ball head I've found for plein air oil painting, whether it's for a pochade box or a split panel holder and palette setup.The ARCA plate is beautifully low-profile, the head's grip on it is solid, the weight allowance will cover any modern gear, a single knob frees all movements of the head for quick adjustment, and the lever-shaped knob makes it easy to lock it into place. All in a light, compact, and sturdy package.
Jer
Reviewed in Canada on July 1, 2021
Excellent ball head. I needed one small enough for a mini tripod. Most ball heads are either very large and heavy and meant for a full size tripod, or really small and meant for cellphones.This one is slightly heavier than a Joby ball head, but not any larger. The extra weight of the neewer is because of the mounting plate on top which is made of aluminum rather than the plastic Joby. And the Joby is a weird V shape design which is only useful on a Joby ball head, which you need to change out if you want easy useage between standard tripod mounts.Really good quality as always from Neewer, especially given the price point. The body and main tightening knob seem like a high quality ABS plastic and everything else is aluminum.It has no problem handling a heavy load. I'm using a GH5 with battery grip, long lens and aluminum L bracket weighing in at 1680g, and the ball head locks firmly and doesn't move at all. Just a couple quick turns and the plate releases quickly.I've attached comparison pictures showing what it looks like on small tripods vs Joby ballheads.Can't do much better at this price point.
DHA
Reviewed in Mexico on October 24, 2021
Me funcionó excelentemente para nivelar mis fotos en un tripode que no es demasiado fuerte, los materiales son excelentes y resiste bien mi canon t6i
Campmaster55
Reviewed in the United States on September 3, 2020
This Neewer ball head is the perfect addition to a monopod or even a tripod. I added this to my monopod to provide a little flexibility while out in the backcountry taking wildlife photos. I can comfortably support my Nikon with a 500 mm lens and not have to worry about missing that critical shot. Yes, it is heavier than most ball heads, but that comes with the rock solid support it provides. For me, the little extra weight is well worth the effort it takes to schlep it down the trail (and well off the trail for that matter). Considering the low price, this is a tool that should be in every photographer's bag (or pack).
Seelenwanderer
Reviewed in Germany on September 29, 2020
Bin von der Qualität sehr beeindruckt.Der Kopf und auch die anderen Anbauteile sind sauber gefertigt.Kein Grad oder sonstwelche anderen Verletzungsgefahren.Er ist sehr robust.Für mich ein Top Produkt zu einem sehr attraktiven Preis.Daher eine klare Kaufempfehlung von mir ...Desweiteren lässt er sich sehr leicht bedienen und daher super für sämtliche Einstellungen.Der Spannmechanismus hält den Kugelkopf sicher an Position.
Christopher
Reviewed in the United States on December 13, 2019
I was looking for a small, inexpensive ball head for my GoPro Max and 8 as well as a light mirrorless. I use this on a bunch of different items including a trolley and my motorized slider. It works great! Holds the camera steady, does not slip (which was my worry at this price point) and is very durable.Single use, levers are easy to use and adjust quickly!Would suggest this to anyone looking for a great priced head for a small camera!
Recommended Products