Your cart is empty.
Your cart is empty.Product Description
Trimmer Head for Echo Weed Eater SRM211 SRM225 PAS210 PAS211 PAS231 PAS260 PAS265
Please verifying your engine's model and part numbers to make sure that you receive the right parts and get your engine up and running smoothly.
- Please identify the bushing or bushing and mounting stud combination needed for your model.
- Thread LH trimmer head counterclockwise on to mounting stud or output shaft. Thread RH trimmer head on clockwise. Hand-tighten only
- ECHO SRM Only NOTE: There should be no gap between spacer and line head after tightening. IMPORTANT: Do not force, otherwise threads will strip and cause permanent damage. Unscrew and confirm correct thread size.
Replaces Speed feed 400
Need Echo Left Hand Silver Arbor Part# V160000190 For Lawn & Garden Equipment .
Size:10mm x 1.25mm LH
Fits for SRM SERIES: 140, 200, 202, 210, 220, 230, 250, 251, 260, 261, 265, 266, 280, 300, 302, 303, 311, 330, 340, 343, 350, 400, 402, 500, 501, 1500, 1501, 2010, 2090, 2100, 2110, 2200, 2201, 2300, 2301, 2400, 2410, 2450, 2500, 2501, 2502, 2510, 2530, 2601, 3000, 3001, 3010, 3100, 3110, 3400, 3410, 3500, 3550, 3800, 4600
For RedMax string trimmer
- BC220DL, BC221DL, BC300DL, BC2300DL, BK235FL, BK345FL, BK435FL, BK530DL, BC17, BC23, BC32, BC240DL - Need 7mm x 10mm (LH) Mounting Stud (Gold)
- BC260DL, BC261DL, BC262DL, BC340DL, BC341DL, BC342DL, BC2600DL, BC430DWM, BC440DWM, BK346FL, BK245FLK, BK436FL, BC245A, BC260DM/DMU, BC340DWM/FW, BC431DWM, BCD20, BCF01, BC2601S, BC3400DW, BC4400DW, BCX2600DS, BCZ2500S/SU/SW-Need 8mm x 10mm (LH) Mounting Stud (Silver)
- BC430DWM, BC440DWM, BC441DWM, BC442DWM, BC531DWM, BC532DWM, FBC22, FBC26-Need Echo V225000310 Bolt, Stud-M8X1.25 Rh Black
For Homelite string trimmer
- BCH20, BCH24, BCH32, BCH33, BCH40, BCH48, HBC‐30, HBC‐38, HK‐15, HK 18 (after 1/1/86), HK‐28, HK24(after 1/1/86), HK‐25, HK‐30 (up to 1/86), HK‐33(after 1/1/86), HK‐38, PBC‐3600, PBC‐ 3800, PBC‐4000, PBC‐4000, PLT3400, ST‐285, ST155, ST175, ST385, ST485-Need 8mm x 1.25mm LH Bushing
- HK‐24 (to 1/1/’86), HK30(after 1/1/86), HK33 (to 1/1/86);ST80/385 (EURO)-Need 8mm x 10mm (LH) Mounting Stud
For Hus string trimmer
- 24R(up to ser #603702),-Bolt Stud-M7x1.00 Lh Gold
- 26LC 26RLC 32LC 32RLC MONDO -3/8-24 RH bushing
- 122L 125L 225L 225LD 225R 225RD 225RJ 227LD 232L 232R 322L 322R 324LX 325LX 325RX 326LS 326LX 335LS-10mm x 1.25mm LH Bushing
Carlos fariñas Ojeda
Reviewed in the United States on March 7, 2025
Buen producto gracias
kenneth mccumber
Reviewed in the United States on March 21, 2025
Trash! Broke the first time I used it 🤦♂️ I’ll spend the extra for echo brand from here on out . Not even worth the hassle to send it back for $13
Julio T.
Reviewed in the United States on February 25, 2025
Buen producto y de buena calidad
Gramee7
Reviewed in the United States on May 20, 2024
The head for the trimmer was a reasonable price. It took a little longer to arrive than most items I purchase. It was easy to put on and works according to my son.
Joe Bravo
Reviewed in the United States on October 23, 2024
Solid product. I actually find it easier to use reload than the original. Have used it three of four times for a total of about four or five hours with no problems thus far.
Chris Tidwell
Reviewed in the United States on August 14, 2023
Fast Shipping and very easy to install. The problem I have with this is it did not last one season. I have a 1.2 Acre lot with a large driveway that gets trimmed biweekly. The head did not last and ended up completely falling apart during the last trimming. Looks like the plastic on the head where it can come in contact with the ground thinned out and the spring popped it off. I will not buy this again as it does not last. I went back to the Echo head that lasted me over 9 years.
CaptJJ
Reviewed in the United States on March 28, 2023
Just installed and fits my Echo perfectly. Cannot comment on durability yet but appears solid.
afeldvary
Reviewed in the United States on July 15, 2021
I initially rated this a one star because like others, was not seeing how this head would ever fit on an Echo SRM-2225 due to lack of instructions and the nut being too big which left me perplexed. However, I reached out to a different seller after trying to get it working by buying another one with different threadings and the same result occurred where the head didn't fit. They sent me a youtube video showing the install process. Once I saw where the error was the install was easy. The error where I was seeing it fail was the post in the first picture that I did not know came off. Once I stuck a screwdriver in the little hole shown in the second picture I was able to remove the post and proceed with the install.Easy to install once you know how it's supposed to go on and the new line is fed easily every time you bump it. The only ding I'll give this is due to lack of original packaging and no instructions shipped with the unit.Steps for installing on an SRM-225:1) Rotate head until you see a small hole in the slat in the guard (Picture 2)2) Put the screwdriver in the hole from step one and rotate clockwise removing the old head3) While keeping the screwdriver in place, use a wrench removing the post from picture one if yours has it installed4) Put new trimmer head on rotating counter-clockwise while keeping screwdriver in place until snug5) Ensure that the line feeds properly and everything is snug and secure
Recommended Products